FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 514 SERIES PACK QUANTITY = 10 PIECES l Robust bright nickel plated brass housing l Sealed to IP67 l Raised profile styling l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg STANDARD INTENSITY 514-105-21 Red Colour Diffused 12 19 100 627 -40 ~ +85^ -40 ~ +85 Yes 514-111-21 Yellow Colour Diffused 12 20 50 590 -40 ~ +85^ -40 ~ +85 Yes 514-114-21 Green Colour Diffused 12 20 60 565 -40 ~ +85^ -40 ~ +85 Yes 514-105-23 Red Colour Diffused 24-28 20 100 627 -40 ~ +85^ -40 ~ +85 Yes 514-111-23 Yellow Colour Diffused 24-28 20 50 590 -40 ~ +85^ -40 ~ +85 Yes 514-114-23 Green Colour Diffused 24-28 20 60 565 -40 ~ +85^ -40 ~ +85 Yes HIGH INTENSITY 514-102-04 Red Colour Diffused 1.9* 20 450 660 -40 ~ +85^ -40 ~ +85 Yes 514-102-21 Red Colour Diffused 12 20 450 660 -40 ~ +85^ -40 ~ +85 Yes 514-102-23 Red Colour Diffused 24-28 20 450 660 -40 ~ +85^ -40 ~ +85 Yes Vdc mA mcd nm °C °C UNITS * = Voltage DC for 20mA product is Vf@20mA, not Vopr Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 036/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 514 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be clean and burr free MATERIALS Body PUSH-ON CONNECTORS Brass to BS 2874 CZ121 Nickel plated to BS 1224 Nut Brass to BS 2874 CZ121 nickel plated to BS 1224 Panel Seal Viton Termination Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Lock Washer Zinc plated steel Encapsulation PC5430 resin 925-000-00 is brass tin plated. For use with 514 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 514 MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER 1000 NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 12.7 1.0 x,y=19.5 1.5-8.0 mm Nm mm mm CUTOUT 3* /1000• mw * = Current version PANEL REVERSE Vdc MOUNTING MOUNTING PANEL • = Voltage version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 036/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 102, 105, 111 & 114 ALSO AVAILABLE Part numbers also available in the 514 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR (Vdc) Vopr VOLTAGE DC (Vdc) Vopr 514-102-22 Red 24 Vdc 514-114-72 514-102-25 Red 110 Vdc 514-114-75 Green 110 Vac 514-102-72 Red 24 Vac 514-114-76 Green 230 Vac Red 20mA 514-102-75 Red 110 Vac 514-501-04 514-102-76 Red 230 Vac UNITS 514-105-04 Red 20mA 514-105-22 Red 24 Vdc 514-105-25 Red 110 Vdc 514-105-55-15 Red 130 Vdc 514-105-72 Red 24 Vac 514-105-72-19 Red 24 Vac 514-105-75 Red 110 Vac 514-105-76 Red 230 Vac 514-105-76-15 Red 230 Vac 514-111-04 Yellow 20mA 514-111-22 Yellow 24 Vdc 514-111-72 Yellow 24 Vac 514-111-72-19 Yellow 24 Vac 514-111-75 Yellow 110 Vac 514-111-75-19 Yellow 110 Vac 514-111-76 Yellow 230 Vac 514-111-77 Yellow 125 Vac 514-114-04 Green 20mA 514-114-20 Green 5/6 Vdc 514-114-22 Green 24 Vdc 514-114-55-15 Green 130 Vdc Green 24 Vac UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 036/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3