FEATURES PANEL INDICATOR LEDs - Ø6.35mm Mounting 318 SERIES Bi-colour & Tri-colour l Domed fresnel lens styling for wide viewing angle l Flying lead terminations available l Available as a Red/Amber/Green tri-colour indicator l Sealed to IP40 l Supplied complete with mounting hardware l Product illustrated 318-530-23 PACK QUANTITY = 20 PIECES SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE LENGTH λp (nm) OPERATING STORAGE TEMP TEMP Topr Tstg BI-COLOUR STANDARD INTENSITY 318-530-04 Red/Green Water Clear 2.0/2.2 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-20 Red/Green Water Clear 5/6 15/20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-21 Red/Green Water Clear 12 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-23 Red/Green Water Clear 24-28 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-04-35 Red/Green Water Clear 2.0/2.2 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-20-35 Red/Green Water Clear 5/6 15/20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-21-35 Red/Green Water Clear 12 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-22-35 Red/Green Water Clear 24-28 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes Vdc mA mcd nm °C °C TRI-COLOUR STANDARD INTENSITY UNITS 530 & 535 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS083/07 Issue 1 SAMPLES AVAILABLE Page 1 of 3 318 Bi-colour and Tri-colour Series Tri-colour Bi-colour MOUNTING HOLE Dimensions in mm (Typical) Red dot denotes red anode, green dot denotes green Not to scale anode. Centre pin cathode on tri-colour version. MATERIALS PUSH-ON CONNECTORS Body Nylon 6 909-000-00 is gold plated Panel Washer Neoprene for use with 318 series. Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip Spring steel Fresnel lens Polycarbonate Header 910-000-00 is tin plated Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance Dimensions in mm (Typical) and gas tight electrical PTFE Not to scale contact. TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER DISSIPATION PANEL REVERSE CUTOUT VOLTAGE 318 500 3 6.35 UNITS mW Vdc mm MINIMUM MOUNTING MIN/MAX. PANEL CENTRES THICKNESS mm mm 13.0 9.0 OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 13 DC Products Red-anode / Black-cathode 150mm 13 AC Products Brown-live / Blue-neutral 150mm 17 DC Products Red-anode / Black-cathode 1000mm 17 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 7/0.2mm 1.2mm OF OVER COMMENTS Customised lengths available How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 083/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 318 Series Part numbers also available in the 318 Series: PART NO. COLOUR VOLTAGE 318-502-20-03 Red 5/6Vdc 318-502-22-03 Red 24Vdc 318-503-21 Red 12Vdc 318-503-22 Red 24Vdc 318-503-22-03 Red 24Vdc 318-503-22-04 Red 24Vdc 318-506-22-03 Orange 24Vdc 318-509-22 Yellow 24Vdc 318-512-21-13 Green 12Vdc 318-512-22-03 Green 24Vdc 318-512-23 Green 24-28Vdc 318-513-23 Green 24-28Vdc 318-519-22 Blue 24Vdc 318-521-22 Yellow 24Vdc 318-530-04 Red/Green 20mA 318-530-20-50 Red/Green 5/6Vdc 318-530-22 Red/Green 24Vdc 318-530-22-50 Red/Green 24Vdc 318-535-04 Red/Green Tri 20mA 318-535-04-35 Red/Green Tri 20mA 318-535-20-35 Red/Green Tri 5/6Vdc 318-535-21 Red/Green Tri 12Vdc 318-535-21-35 Red/Green Tri 12Vdc 318-535-21-50 Red/Green Tri 12Vdc 318-535-22 Red/Green Tri 24Vdc 318-535-22-13 Red/Green Tri 24Vdc 318-535-22-17 Red/Green Tri 24Vdc 318-535-22-19 Red/Green Tri 24Vdc 318-535-22-35 Red/Green Tri 24Vdc 318-535-22-54 Red/Green Tri 24Vdc 318-535-22-55 Red/Green Tri 24Vdc 318-535-24-35 Red/Green Tri 48Vdc 318-535-71 Red/Green Tri 12Vac 318-536-21 Red/Yellow Tri 12Vdc 318-538-22 Red/Green Tri 24Vdc The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation (Vdc) Vopr beyond the generic information contained within this datasheet. Please contact sales for further information. UNITS How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 083/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3