MRV EM316GRMAHSH-5

Media Converters
Repeaters and Optimizers
Datasheet
FD
Optical Ethernet Services Demarcation - 802.3ah
Features
Optical Ethernet, Fast Ethernet, and Gigabit Ethernet
Demarcation
Remote upgrades through firmware download
IEEE 802.3ah remote management
- Remote monitoring and provisioning
- Last Gasp notification for advanced status propagation
- Vendor-specific extensions
IEEE Ethernet standard compatibility
Large packet size support
- 1914 bytes - EM316EFRMAHSH-5
- 2044 bytes - EM316GRMAHSH-5
Overview
The Fiber Driver® Optical Ethernet Service Demarcation (OESD) modules
from MRV Communications enable service providers to build a fully
managed point-to-point fiber optic link with a single manager entity
at one end of the link instead of at each end. Using the OAM 802.3ah
standard and its vendor extensions, they provide management control
of both ends of the link from the Central Office (CO) end. The remote
CPE and OAM ports are managed as if they were local ports on the CO
module.
By eliminating CPE management devices and incorporating plug-nplay functionality, the Fiber Driver OESD modules reduce costs of both
equipment and configuration. The robust management and diagnostic
features include remote loopback, Digital Diagnostics, and remote
software downloads. They improve operational expenses by reducing
the need for service truck rolls while enhancing customer support to
ensure maximum return on all network investments.
OESD modules are available for Ethernet and Fast Ethernet
(EM316EFRMAHSH-5) and for Gigabit Ethernet (EM316GRMAHSH-5)
applications. They include solutions for dual fiber, single fiber, self-healing
links, and redundant trunk configurations.
These modules deliver the full functionality of an optical Ethernet data
channel to the end user - including support for packet sizes of up to 1900
bytes - while providing the management features required by service
providers. They offer rate limiting at a resolution of 32 kbps for Ethernet
and Fast Ethernet data channels and at 1 Mbps for Gigabit Ethernet data
channels, enabling multi-tiered service plans.
[email protected]
Rate limiting at a fine resolution
- 32 kbps EM316EFRMAHSH-5
- 1 Mbps EM316GRMAHSH-5
Link Integrity Notification (LIN) for fault detection and
propagation
Access port selection
- RJ-45 with auto-negotiation and automatic MDI/MDIX
sensing
- SFP-based optical port
SFP-based (trunk) interface with link redundancy at no
additional cost
Flexible SFP fiber optic interfaces
- Reduced inventory needs
- Simple replacement and upgrades
- Beyond 120 kilometer range on single-mode fiber
without amplification
- Single fiber transceivers
- WDM colored optics for further fiber optimization
(CWDM or DWDM)
SFP Digital Diagnostics
performance management
(SFF-8472)
for
optical
Local and remote loopback for fault isolation and root
cause analysis
Advanced performance monitoring statistics
Hot-swap support for reduced network interruption
Single slot design for simple installation with any Fiber
Driver chassis
Media Converters
Repeaters and Optimizers
Management features common to all the Fiber Driver OESD
modules include Last Gasp, LIN, and remote loopback.
Last Gasp allows the module to send a management alert
before shutting down in the event of power loss. With LIN
enabled, loss of link on any port of a module disables all
downstream AH ports. Devices dependent on the link
status can react to the problem, which is critical in mission
critical network designs. Remote loopback can test and
verify the integrity of the entire link.
Every Fiber Driver OESD module is upgradeable to the
latest features and standards available by remotely
downloading the microcode and firmware.
The OESD modules are compatible with any powered
Fiber Driver chassis and they fit into a single slot. Each
module includes an auto-sensing 10/100 Mbps RJ-45 data
port that also features automatic MDI/MDIX selection.
The SFP ports support Digital Diagnostics (SFF-8472), and
they may be configured with any of the wide range of SFP
interfaces available from MRV.
Self-healing and redundant link versions of the Fiber Driver
OESD modules are standard for mission critical applications.
Both single-homed and dual-homed configuarations are
supported. The redundant link feature includes primary
and secondary interfaces for both the OAM and trunk
ports. If the active link fails, the module automatically
switches to the secondary path. The switchover time is
less than 100 nanoseconds with parallel links, so the event
remains transparent to the network and eliminates loss of
service and data.
Fiber Driver OESD modules support the full range of shorthaul, long-haul, dual-fiber, single-fiber, Fast Ethernet, and
Gigabit Ethernet SFPs available from MRV.
For more information on the complete line of MRV
Communications pluggable transceivers and other
products, visit our website at: http://www.mrv.com/plugins/
or contact an MRV representative.
AH2EMOTE-ANAGEMENT%XAMPLE
#0% MANAGEMENT DATA IS REMOTELY
COLLECTED BY THE &IBER $RIVER
MANAGEMENT MODULE AND MADE
AVAILABLETOTHEMANAGEMENTCONSOLE
-ANAGEMENT3TATION
0ROVIDER.ETWORK
&IBER$RIVER#/-ODULESINA3LOT#HASSIS
&IBER$RIVER-ANAGEMENT-ODULE
&IBERTOTHE(OME
5SER$ATA
#0%
#0%
&IBERTOTHE8
-ANAGEMENT
$ATA
[email protected]
%-'2-!(3(#0%-ODULEWITH
2EDUNDANT,INKINASLOT#HASSIS
Media Converters
Repeaters and Optimizers
Physical Specifications:
Operating Temperature Range
00C to 500C (320F to 1220F)
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Relative Humidity
85% maximum, non-condensing
Dust
Less than 106 particles/m³ (30,000 particles/ft³)
Physical Dimensions
25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep)
Weight
120 - 240 g (4.2 - 8.5 oz) depending on configuration
Regulatory Compliance
FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive;
China RoHS; WEEE Directive
Ordering Information
Model
Function
EM316EFRMAHSH-5
Auto-Sense 10/100Base-TX/SFP to SFP with
802.3ah Remote Management.
Redundant trunk, and data links.
EM316GRMAHSH-5
10/100/1000Base-TX/SFP data port to SFP
trunk port with 802.3ah Remote Management.
Redundant trunk, and data links.
Protocol
Connectors¹
Port/Link
Wavelength (nm)
Port / Link
Budget (dB)²
Port / Link
Range³
Port / Link
Ethernet/
Fast Ethernet
RJ-45 & SFP/
SFP (x2)
N/A or SFP/
SFP Dependent
N/A or SFP/
SFP Dependent
1-100 m or SFP/
SFP Dependent
Gigabit
Ethernet
RJ-45 & SFP/
SFP (x2)
N/A or SFP/
SFP Dependent
N/A or SFP/
SFP Dependent
1-100 m or SFP/
SFP Dependent
¹ Default connectors listed, others optional.
² Higher budgets available.
³ All specifications, distance claims and operational parameters are based on industry average fiber cable performance; 9µ Singlemode performance of 0.25 dB/km for 1550 nm and 0.5 dB/km for
1310 nm, and 62.5µ Multimode performance of 3 dB/km for 850 nm and 1.5 dB/km for 1300 nm. For non-standard fiber applications or additional information contact MRV Communications
Compatibility Note:
The “-5” models are not interoperable or compatible with earlier revisions of these modules. Management
of these line cards requires a compatible Fiber Driver network management module. Contact MRV customer
support for more compatibility details and upgrade or downgrade information.
MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com.
Please e-mail us at [email protected] or call us for assistance.
MRV (West Coast USA)
20415 Nordhoff St.
Chatsworth, CA 91311
800-338-5316
818-773-0900
MRV (East Coast USA)
295 Foster St.
Littleton, MA 01460
800-338-5316
978-952-4700
MRV (International)
Business Park Moerfelden
Waldeckerstrasse 13
64546 Moerfelden-Walldorf
Germany
Tel. (49) 6105/2070
Fax. (49) 6105/207-100
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness
thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications
logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-FD-OESD8025-032707
1398017-001 Rev. A0
Copyright ©2007 MRV Communications, Inc. All Rights Reserved.