Oscilent Corporation RF SAW Filter | 802-RF1575.42M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF1575.42M-B 3.0 x 3.0 SMD GPS Apr. 12 2003 . TYPE : 1575.42 MHz RF SAW Filter PART NUMBER : 802-RF1575.42M-B . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 1575.42 - MHz 1574.42 ~ 1576.42 MHz - 2.9 3.5 dB DC Voltage - - - 0 V Input Power - - - 10 dBm Operating Temperature - -30 - +85 °C Storage Temperature - -40 - +85 °C Center Frequency Insertion Loss Amplitude Ripple Stopband Attenuation VSWR Teminating Impedance 1574.42 ~ 1576.42 MHz - 0.1 1.0 dB 847.5 ~ 852.5 MHz 35.0 39.0 - dB 1497.50 ~ 1502.50 MHz 45.0 56.0 - 1532.92 ~ 1537.92 MHz 35.0 42.0 - 1612.92 ~ 1617.92MHz 45.0 52.0 - 1637.50 ~ 1642.50MHz 50.0 60.0 - 1697.50 ~ 1702.50MHz 50.0 60.0 - 1574.42 ~ 1576.42 MHz - 1.6 2.0 - - - 50 - ohm * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A Ground B Output C Ground D Ground E Input F Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf1575_42b.htm 12/30/2005 Oscilent Corporation RF SAW Filter | 802-RF1575.42M-B Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Part No.: 802-RF1575.42M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf1575_42b.htm 12/30/2005