Oscilent Corporation RF SAW Filter | 803-RF448.0M-D Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 803-RF448.0M-D 3.8 x 3.8 SMD Wireless Communication Jan. 01, 2007 . TYPE : 448.0 MHz RF SAW Filter PART NUMBER : 803-RF448.0M-D . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Ripple Stopband Attenuation Teminating Impedance Condition Minimum Typical Maximum Units - - 448.0 - MHz 440.0 ~ 456.0 MHz - 2.8 4.0 dB 440.0 ~ 456.0 MHz - 0.7 1.5 dB Fo -200.0 ~ Fo -42.8 MHz 45.0 50.0 - dB Fo +42.8 ~ Fo +200.0 MHz 50.0 55.0 - - - 50/0 - * Custom SAW RF Filters available. Contact Oscilent for assistance. . Package Outline Frequency Reponse Test Fixture ohm/pF Oscilent Corporation RF SAW Filter | 803-RF448.0M-D Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Page 2 of 2 Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 803-RF448.0M-D