Oscilent Corporation RF SAW Filter | 803-RF416.0M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 803-RF416.0M-A 3.8 x 3.8 SMD Wireless Communication Mar. 2 2007 . TYPE : 416.0 MHz RF SAW Filter PART NUMBER : 803-RF416.0M-A . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 416.0 - MHz 415.0 ~ 417.0 MHz - 2.7 4.0 dB Center Frequency (Fo) Insertion Loss Ripple Relative Attenuation 415.0 ~ 417.0 MHz - 0.7 1.5 dB Fo -200.0 ~ Fo -17.0 MHz 40.0 52.0 - dB Fo +17.0 ~ Fo +200.0 MHz 40.0 47.0 - - - 50/0 - Teminating Impedance ohm/pF * Custom SAW RF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE Pin Layout TEST FIXTURE FREQUENCY RESPONSE A Ground B Input C Ground D Ground E Output F Ground Oscilent Corporation RF SAW Filter | 803-RF416.0M-A Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Page 2 of 2 Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 803-RF416.0M-A