Oscilent Corporation IF SAW Filter | 807-SL300.0M-07 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 807-SL300.0M-07 7.0 x 5.0 SMD Mobile Communication Jan. 01, 2007 TYPE : 300.00 MHz Bandpass Filter 9.20 MHz Bandwidth PART NUMBER : 807-SL300.0M-07 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 300.00 - MHz Insertion Loss at Fo - 14.0 - dB Bandwidth at -1.0 dB 7.0 7.40 - MHz Bandwidth at -3.0 dB 8.0 9.20 - MHz Bandwidth at -40.0 dB - 15.40 17.0 MHz dB - Relative Attenuation Lower Sidelobe 40 45 - Upper Sidelobe 40 45 - dB Temperature Coefficient - -23 - ppm/°C Input / Output Impedance (Single Ended)* - 50 - ohm Amplitude Ripple - 0.65 1.5 dBp-p Group Delay Variation - 32 100 ns Ambient Temperature - 25 - °C Absolute Delay at Fo - 0.520 1.0 µsec * With Matching Network (Ref. Testing Environment Circuit as shown) Modification to Impedance Values are possible if needed. PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 807-SL300.0M-07 Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: L1: 28 nH; C1: 16pF OUTPUT: L2: 25 nH; C2: 18pF FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 807-SL300.0M-07