RG3J-10 GLASS PASSIVATED JUNCTION RECTIFIER Forward Current – 3.0 Amperes Features • Cavity-free glass passivated junction • High temperature metallurgically bonded construction • High temperature soldering guaranteed: 350oC/10 seconds,0.375”(9.5mm) lead length, 5 lbs, (2.3kg) tension Mechanical Data • Case: Solid glass body. • Terminals: Solder plated axial leads, solderable per MIL-STD-750.Method 2026. • Polarity: Color band denotes cathode end. • Mounting Position: Any • Weight: 0.04 ounce, 1.1 grams. Absolute Maximum Ratings and Characteristics 0 Ratings at 25 C ambient temperature unless otherwise specified. Symbols Value Units Maximum repetitive peak reverse voltage VRRM 400 Volts Maximum RMS voltage VRMS 280 Volts Maximum DC blocking voltage VDC 400 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=70 OC IF(AV) 3 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 125 Amps Maximum full load reverse current, full cycle average, 0.375”(9.5mm)lead length at TA=70 OC IR(AV) 150 µA VF 1.3 Volts Maximum instantaneous forward voltage at 3A TA = 25 OC Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance at 4V, 1MHz O TA = 25 C TA = 175OC IR 5 µA 300 CJ 40 RθJA RθJL 20 10 Operating junction temperature range TJ -65 to+175 O C Storage temperature range TS -65 to+200 O C Typical thermal resistance (Note 1) Notes: pF O (1) Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length with both leads attached between heat sink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003 C/W RG3J-10 FIG.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 FORWARD CURRENT DERATING CURVE 4.0 60Hz RESISTIVE OR INDUCTIVE 10AD 3.0 2.0 1.0 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE oC AVERAGE FORWARD CURRENT AMPERES AMERAGE FORWARD RECTIFIED CURRENT AMPERES Ratings and Characteristic Curves (TA=25oC unless otherwise noted) 200 Tj=Tj max 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 10 1 100 NUMBER OF CYCLES AT 60 Hz FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT AMPERES 10 10.0 o o 1 Tj=25 C Tj =150 C P ULSE WIDTH=300 1% DUTY CYCLE s 0.1 AVERAGE FORWARD CURRENT MICROAMPERES 10 1 Tj=100 oC o Tj=75 C 0.1 o Tj=25 C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 INATANTANEOUS FORWARD REVERSE VOLTAGE VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% JUNCTION CAPACITANCE pF FIG.5 TYPICAL JUNCTION CAPACITANCE 100 o Tj=25 C f=1.0MHz Vsig=50mV p-p 10 1 10 100 REVERSE VOLTAGE VOLTS SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003