RGP15A THRU RGP15M FAST SWITCHING RECTIFIERS GLASS PASSIVATED JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Current – 1.5 Amperes Features • High temperature metallurgically bonded construction • Cavity-free glass passivated junction. • 1.5 Ampere operation at TA = 55oC with no thermal runaway. • Typical IR less than 0.1µA • High temperature soldering guaranteed: 350oC/10seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data • Case: JEDEC DO-204AC, molded plastic over glass body. • Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25oCambient temperature unless otherwise specified. Symbols RGP RGP RGP RGP RGP RGP RGP 15A 15B 15D 15G 15J 15K 15M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current O 0.375” (9.5mm) lead length at TA = 55 C IF(AV) 1.5 A IFSM 50 A Maximum full load reverse current, full cycle O average 0.375” (9.5mm) lead length at TA = 55 C IR(AV) 100 µA Maximum instantaneous forward voltage at 1.5A VF 1.3 V IR 5 200 µA Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) O Maximum DC reverse current TA = 25 C O at rated DC blocking voltage TA = 150 C Maximum reverse recovery time IF=0.5A, IR=1A, Irr=0.25A. Typical junction capacitance at 4 V, 1MHz Typical thermal resistance (Note 1) Operating junction and storage temperature range Trr CJ 150 µA 250 500 25 RθJA 45 TJ ,TS -65 to +175 pF O C/W O Notes:1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B.mounted. SEMTECH ELECTRONICS LTD. ® nS (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003 C RGP15A THRU RGP15M RATINGS AND CHARACTERISTIC CURVES ( T A=25 oC unless otherwise noted) FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.5 RESISTIVE OR INDUCTIVE LOAD 1.25 1.0 0.75 0.5 0.25 0.375" (9.5mm) lead length PEAK FORWARD SURGE CURRENT(A) AVERAGE FORWARD RECTIFIED CURRENT (A) FIG.1-FORWARD CURRENT DERATING CURVE 50 TJ=TJ max 8.3ms single half sine-wave (JEDEC Method) 40 30 20 10 0 0 25 50 75 100 125 150 10 1 175 NUMBER OF CYCLES AT 60 Hz AMBIENT TEMPERATURE( o C) 10 1 TJ=25 oC PULSE WIDTH=300 s 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT( A) INSTANTANEOUS FORWARD CURRENT(A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 0.1 1.6 20 10 o TJ =125 C 1 TJ =75 oC 0.1 TJ=25 oC 0.01 0 INSTANTANEOUS FORWARD VOLTAGE (V) JUNCTION CAPACITANCE(pF) TJ =25 oC f=1.0MHz Vsig=50mVP-P 10 1 1 10 100 40 20 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) TRANSIENT THERMAL IMPEDANCE ( oC/W) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 100 REVERSE VOLTAGE (V) FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.1 1 10 100 t, PULSE DURATION (sec.) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 20/06/2003