65 WATT MEDICAL POWER SUPPLIES DESCRIPTION PM65 SERIES (MDD) The PM65 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 50 to 65 watts of continuous power. They are ideally suited for use in medical equipment not for patient contact, and operate at 85 to 264 VAC input voltage without the need of voltage selection. All models meet the safety requirements of UL, CSA and IEC. F E ATU R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Low safety ground leakage current M e e t E N 5 5 0 11 a n d F C C C l a s s B Small size, light weight 100% burn-in W i d e i n p u t r a n g e 8 5 t o 2 6 4 VA C Input surge current protection Overvoltage protection Overcurrent protection S a f e t y St a n d a r d A p p ro v a ls ： I N P U T S P E C I F I C ATI O N S UL 2601-1 Input voltage： Input frequency： 47 to 63 Hz CSA C22.2 No. 601.1 1.60A（rms）for 115VAC 1.00A（rms）for 230VAC 90uA max. @ 115VAC, 60Hz 150uA max. @ 230VAC, 50Hz TÜV EN60601-1 85 to 264 VAC Input current： Leakage current： GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Output voltage/current： Total output power： Ripple and noise： Overvoltage protection： Overcurrent protection： Temperature coefficient： Transient response： 0℃ to +70℃ Switching frequency： 32KHz ±5KHz 70﹪minimum on single output models with Vo Efficiency： ≧12V, 65% minimum on the others. 10 msec minimum at 110VAC Hold-up time： Line regulation： ±0.5﹪maximum at full load 15 amps @ 115VAC, or 30 amps @ 230VAC, at Inrush current： 25℃ cold start Withstand voltage： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground 400,000 hours minimum at full load at 25℃ MTBF： ambient , calculated per MIL-HDBK-217F EMC PERFORMANCE (EN60601-1-2: 2001) Class B conducted, Class B radiated E N 5 5 0 11 : Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: EN61000-3-2: Harmonic distortion , Class A EN61000-3-3: Line flicker -40℃ to +85℃ EN61000-4-2: ESD,± 8KV air and ± 6KV contact 5﹪to 95﹪non-condensing EN61000-4-3: Radiated immunity, 3V/m, for 80~2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms See rating chart 65 watts maximum 1﹪ peak to peak maximum Provided on output #1 only; set at 112 - 132﹪ of its nominal output voltage All outputs protected to short circuit conditions All outputs ±0.04﹪ /℃ maximum Maximum excursion of 4﹪or better on all models, recovering to 1﹪of final value within 500us after a 25﹪ step load change E N V I R O N M E N TA L S P E C I F I C ATI O N S Operating temperature： Storage temperature： Relative humidity： Derating： Derate from 100﹪at +50℃ linearly to 50% at +70℃ E N 6 1 0 0 0 - 4 - 11 : Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com PM65 SERIES MEDICAL GRADE OUTPUT VOLTAGE/CURRENT RATING CHART (1) (2) Model PM65-10A PM65-12A PM65-13A PM65-14A PM65-16A PM65-17A PM65-23A PM65-24A PM65-25A PM65-30A PM65-31A PM65-32A PM65-33A PM65-39A PM65-40A Notes: Output #1 Vnom. Imin. Imax. 5V 0A 10A 12V 0A 5.5A 15V 0A 4.5A 24V 0A 3.0A 30V 0A 2.5A 36V 0A 2.2A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A +5V 1A 6.0A Tol. 2% 1% 1% 1% 1% 1% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output #2 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) +12V 0.5A 3.0A +15V 0.4A 3.0A +24V 0.3A 2.0A +12V 0.5A 3.0A +12V 0.5A 3.0A +15V 0.4A 3.0A +15V 0.4A 3.0A +24V 0.3A 2.0A +12V 0.5A 3.0A Tol. 5% 5% 5% 5% 5% 5% 5% 5% 5% Output #3 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) -5V 0.1A 0.5A -12V 0.1A 0.5A -15V 0.1A 0.5A -12V 0.1A 0.5A -12V 0.1A 0.5A -12V 0.1A 0.5A Tol. 10% 10% 10% 10% 10% 10% Output #4 Vnom. Imin. Imax. Tol. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) -5V 0.1A 0.5A 10% Maximum Output Power 50W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W (1) All multiple output models may be operated at no-load without damage. At no-load, output voltage tolerance increases to 10% (2) Safety agency approvals are for the above listed models in PCB format. To order a model with a metallic L-bracket or box, change suffix “A” to “B” for L-bracket format or to “C” for enclosed format (mechanical details shown in page 7-2), e.g. PM65-25C. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3081 and Molex 2878 series crimp terminal. 5. Weight: 400 grams (PCB format) 6. The “＊” marked mounting hole is for system grounding through a metallic stand-off to the system chassis. PIN CHART PIN MODEL PM65-10A PM65-12A PM65-13A PM65-14A PM65-16A PM65-17A 1 2 3 4 5 6 7 8 OUTPUT #1 OUTPUT #1 OUTPUT #1 OUTPUT #1 RETURN RETURN RETURN RETURN OUTPUT #1 OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 OUTPUT #2 N.C. N.C. PM65-30A PM65-31A PM65-32A PM65-33A PM65-39A OUTPUT #1 OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 OUTPUT #2 OUTPUT #3 N.C. PM65-40A OUTPUT #1 OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 OUTPUT #2 OUTPUT #3 OUTPUT #4 PM65-23A PM65-24A PM65-25A Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com