110 WATT SWITCHING POWER SUPPLIES PU110 SERIES DESCRIPTION ( LV D ) RoHS The PU110 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 72 to 110 watts of continuous power at 25 CFM forced air cooling or 52 to 80 watts at convection cooling. They operate at 85 to 264VAC input voltage without the need of a selector strap. They are ideally suited for use in small to medium size digitally-based systems, such as point-of-sale equipment, microprocessor based systems, and telecom equipment. All models meet the safety requirements of UL, CSA and IEC. F E AT U R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Recognized or certified by UL, CSA and TÜV Power Fail Detect (PFD) signal 100% burn-in W i d e i n p u t r a n g e 8 5 t o 2 6 4 VAC Input surge current protection O v e r v o l ta g e p r o t e c t i o n Overcurrent protection C o m p l i a n t w i t h R o H S r e q u i r e m e n ts S a f e t y Sta n d a r d A p p r o va l s ： UL 60950-1 I N P U T S P E C I F I C AT I O N S Input voltage： Input frequency： Input current： Earth leakage current： (Touch current) 85 to 264VAC 47 to 63Hz 3.20A（rms）for 115VAC 1.80A（rms）for 230VAC 0.40mA max. @ 115VAC, 60Hz 0.75mA max. @ 230VAC, 50Hz CSA C22.2 No. 60950-1 TÜV EN60950-1 OUTPUT SPECIFICATIONS Output voltage/current： See rating chart 110 watts maximum at 25 CFM Total output power： forced air cooling or 80 watts maximum at convection cooling 1﹪ peak to peak maximum Ripple and noise： Overvoltage protection： Provided on output #1 only; set at 112-132﹪ of its nominal output voltage Overcurrent protection： All outputs protected to short circuit conditions Temperature coefficient：All outputs ±0.04﹪/ºC maximum Maximum excursion of 4﹪ or Transient response： better on all models, recovering to 1﹪ of final value within 500us after a 25﹪ step load change TTL logic high for normal operation PFD signal： and TTL logic low upon loss of input power. This signal appears at least 1ms prior to +5V output dropping 5﹪ below its nominal value. This signal also provides a minimum delay of 100ms after +5V is within regulation. E N V I R O N M E N TA L S P E C I F I C AT I O N S Operating temperature: Storage temperature: Relative humidity: Derating: Cooling: 0ºC to +70ºC -40ºC to +85ºC 5﹪ to 95﹪ non-condensing Derate from 100﹪ at +50ºC linearly to 50﹪ at +70ºC 110 watts continuous output power at 25 CFM forced air cooling or 80 watts at convection cooling GENERAL SPECIFICATIONS Switching frequency: Efficiency: 20KHz to 250KHz, varies with load and line 70﹪ minimum on single output models with Vo≥12V, 65% minimum on the others Hold-up time: 12 msec minimum at 110VAC Line regulation: ±0.5﹪ maximum at full load Inrush current: 15 amps @ 115VAC or 30 amps @ 230VAC, at 25ºC cold start Withstand voltage: 3000VAC from input to output 1500VAC from input to ground 500VAC from output to ground 400,000 hours minimum at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC Performance (EN55024) EN55022: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ± 1KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: Voltage dips, 30% reduction for 500ms and >95% reduction for 10ms MTBF： Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com PU110 SERIES UNIVERSAL INPUT OUTPUT VOLTAGE/CURRENT RATING CHART Output #1 (3)(4) MODEL Vnom. Imin. Imax. PU110-10-1A 3.3V 0A PU110-10A 5V 0A PU110-12A 12V 0A PU110-13A 15V 0A PU110-14A 24V 0A PU110-16A 30V 0A PU110-23A +5V 0A PU110-31A +5V 0A PU110-32A +5V 0A PU110-40A +5V 0A PU110-41A +5V 0A PU110-42A +5V 0A PU110-45A +5V 0A PU110-45-1A +5V 2.0A PU110-45-2A +5V 0A PU110-46A +5V 0A NOTES: 1. 2. 3. 4. 22A 22A 9.0A 7.5A 4.5A 3.6A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A Output #2 Tol. 3% 3% 2% 2% 2% 2% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output #3 Output #4 Maximum Ipeak Output Vnom Imin. Imax. (1) Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Power (2) +12V +12V +15V +12V +15V +12V +12V +12V +24V +15V 0A 0A 0A 0A 0A 0A 0A 0A 0A 0A (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 5A 5A 4A 5A 4A 5A 5A 5A 3A 4A 9.0A 9.0A 7.5A 9.0A 7.5A 9.0A 9.0A 9.0A 5.0A 7.5A 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% -12V -15V -12V -15V -12V -12V -12V -12V -15V 0A 0A 0A 0A 0A 0A 0A 0A 0A (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 1A 1A 1A 1A 1A 1A 1A 1A 1A 4% 4% 4% 4% 4% 4% 4% 4% 4% -5V +24V +12V +24V +24V +12V -5V (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0A 1A 0A 1A 0A 1A 0A 1A 1.5A 3A 0A 1A 0A 1A 4% 4% 4% 4% 10% 4% 4% 72W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts. 110 watts maximum at 25 CFM forced air cooling or 80 watts maximum at convection cooling, except model PU110-10-1A which is rated maximum 60W at convection cooling or 72W at 25 CFM forced air cooling. Safety agency approvals are for the above listed models in PCB format. To order models with metallic L-bracket or box, change suffix “A” to “B” for L-bracket format, to “C” for enclosed format (mechanical details shown in page 6-1), e.g. PU110-31C. The output #1 of model PU110-45-1A needs a minimum current of 2A to support the other outputs at their maximum rated loads. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2878 series crimp terminal 5. 6. Weight: 640 grams (PCB format). The copper pad of the mounting hole near P1 is for system grounding through a metallic stand-off to system chassis. PIN CHART PIN 1, 2, 3 4, 5 6, 7 8, 9 10 11 12 13 PU110-10-1A PU110-10A PU110-12A PU110-13A PU110-14A PU110-16A OUTPUT #1 RETURN RETURN OUTPUT #1 P.F.D. N.C. KEY N.C. PU110-23A OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D. N.C. KEY N.C. OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D. OUTPUT #3 KEY N.C. OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D. OUTPUT #3 KEY OUTPUT #4 MODEL PU110-31A PU110-32A PU110-40A PU110-41A PU110-42A PU110-45A PU110-45-1A PU110-45-2A PU110-46A Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com