Model 100NXXAE RoHS Compliant Full Flange Attenuators 100 Watts General Specifications Resistive Element Thick film Substrate ALN ceramic Cover Alumina Ceramic Mounting Flange Copper, Nickel plated per QQ-N-290 • DC – See table Lead(s): 99.99% pure silver (.006” thick) • 100 Watts Operating Temperature -55 to +150°C (see chart) 100N30AE SHOWN (NO MARKING) Features: • ALN Ceramic Electrical Specifications • Welded Silver Leads Attenuation Range: 1, 2, 3, 4, 5, 6, 9, 10, 20, 30 db • Non-Nichrome Resistive Element Frequency Range: DC – See Chart Power: 100 Watts • Low VSWR V.S.W.R.: See Chart • 100% Tested Notes: Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Lead length 0.150” minimum. Specifications subject to change without notice. Outline Drawing NOTE: 100N30AE IS NOT MARKED 100NXXAE (097) Rev C USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 100NXXAE RoHS Compliant Specifications Suggested Mounting Procedure: Power Derating: 100NXXAE (097) Rev C USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392