PRELIMINARY DATA SHEET UPC2791TB, UPC2792TB 5 V, SUPER MINIMOLD SILICON MMIC WIDEBAND AMPLIFIER FEATURES TYPICAL PERFORMANCE CURVES • HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT- 363 package GAIN vs. FREQUENCY • SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V • POWER GAIN: UPC2791TB: GP = 12 dB TYP UPC2792TB: GP = 20 dB TYP 20 Gain, GP (dB) • WIDEBAND RESPONSE: UPC2791TB: fu = 1.9 GHz TYP UPC2792TB: fu = 1.2 GHz TYP UPC2792TB 15 10 UPC2791TB DESCRIPTION 5 NEC's UPC2791TB and UPC2792TB are Silicon MMIC Wideband Amplifiers manufactured using NEC's 10 GHz fT NESATTM II silicon bipolar process. These devices are designed for use as second IF buffer amps in DBS tuners. The UPC2791/92TB are pin compatible and their performance is comparable to the larger UPC1675/76G, so they are suitable for use as a replacement to help reduce system size. These IC's are housed in a 6 pin super minimold or SOT-363 package. 0.5 0 1.0 1.5 2.0 Frequency, f (GHz) NEC's stringent quality assurance and test procedure ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 Ω) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UPC2791TB S06 UPC2792TB S06 UNITS MIN TYP MAX MIN TYP MAX ICC Circuit Current (no signal) mA 12 17 22 14 19 24 GP Power Gain, f = 500 MHz dB 10 12 14 17 20 22 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz) GHz 1.6 1.9 1.0 1.2 Maximum Output Level, f = 500 MHz, PIN = 0 dBm dBm +2 PO(SAT) NF RLIN Noise Figure, f = 500 MHz dB Input Return Loss, f = 500 MHz dB +4 5.5 9 +3 7.0 12 +5 3.5 12 15 RLOUT Output Return Loss, f = 500 MHz dB 8 11 9 12 ISOL Isolation, f = 500 MHz dB 20 24 24 28 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Date Published: June 28, 2005 6 UPC2791TB, UPC2792TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS VCC Supply Voltage PIN Input Power 2 RECOMMENDED OPERATING CONDITIONS UNITS RATINGS V 6 SYMBOL dBm +10 VCC Supply Voltage V 4.5 5.0 5.5 mW 200 TOP Operating Temperature ˚C -40 +25 +85 PT Total Power Dissipation TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 PARAMETER UNITS MIN TYP MAX Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). PIN DESCRIPTION Pin No. Pin Name Applied Voltage (V) 1 2 5 GND 0 Description Internal Equivalent Circuit UPC2791TB 3 Output — Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. VCC OUT IN GND2 GND1 UPC2792TB 4 VCC 4.5 to 5.5 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. VCC OUT 6 Input — Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to the signal source with a blocking capacitor. IN GND2 GND1 UPC2791TB, UPC2792TB OUTLINE DIMENSIONS (Units in mm) PIN CONNECTIONS PACKAGE OUTLINE S06 (Top View) (Bottom View) 2.1±0.1 1.25±0.1 0.65 3 1.3 0.65 2 4 0.2 +0.1 -0 2 C2C C2S 2.0±0.2 3 4 4 3 5 5 2 6 6 1 5 1 1 6 DOT ON BACK SIDE 0.9 ± 0.1 Marking is an example of UPC2791TB 1. GND 4. VCC 2. GND 5. GND 3. Output 6. Input 0.7 +0.1 0.15 -0.5 0 ~0.1 ORDERING INFORMATION (Solder Contains Lead) TEST CIRCUIT VCC 1000 pF PART NUMBER MARKING QTY UPC2791TB-E3 C2S 3K/reel UPC2792TB-E3 C2T 3K/reel Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. C3 4 50 Ω C2 C1 6 IN 1000 pF 3 1, 2, 5 50 Ω OUT 1000 pF ORDERING INFORMATION (Pb-Free) PART NUMBER MARKING QTY UPC2791TB-E3-A C2S 3K/reel UPC2792TB-E3-A C2T 3K/reel Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.