CREE LM1-TYL1-11-N1

Cree® SMD LED
Model # LM1-TYL1-11-N1
Data Sheet
120-degree, 3.2 x 2.7 mm, power SMD LED in amber color with water-transparent lens
Applications
•
•
•
•
Indicators
Illuminations
LCD Back Lights
Automobile Applications
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
70
mA
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
225
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
RTHJA
300
°C/W
RTHJS
150
°C/W
Forward Current
Peak Forward Current
Junction/Ambient
Note 1
Note 2
Junction/Solder Point
Notes:
1.
2.
Pulse width ≤0.1 msec, duty ≤1/10.
Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2)
D-CT185.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C )
Characteristics
Symbol
Condition
Forward Voltage
VF
IF = 50 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 50 mA
mcd
450
700
λD
IF = 50 mA
nm
584
591
2θ½
IF = 50 mA
deg
Dominant Wavelength
50% Power Angle
Unit
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Typical
Maximum
2.6
3.2
10
596
120
Standard Bins for LM1-TYL1-11-N1 (IF = 50 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown.
Orders for LM1-THR1-11-N1 may be filled with any or all bins contained as below.
All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA.
Luminous Intensity (IV)
X2
X3
X4
X5
W1 or
above
1120 mcd
V2
900 mcd
V1
710 mcd
U2
560 mcd
U1
450 mcd
584 nm
587 nm
590 nm
593 nm
596 nm
Dominant Wavelength (λD)
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of the dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT185.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM1-TYL1-11-N1
Graphs
Rev. No.
02
Graphs
100.0
-50
-60
If (mA)
-40
-20
-30
-10
0.0
Vr(V)
-10.0
80.0
-20.0
60.0
-30.0
40.0
-40.0
20.0
0.0
2.0
2.2 2.4
2.6 2.8 3.0
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vf(V)
Ir(uA)
-50.0
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
Half Power WL=20nm
Domi WL= 591nm
2.5
2.0
100%
1.5
75%
1.0
50%
0.5
25%
If(mA)
0.0
0%
400
500
600
700
WL(nm)
800
0.0
20.0 40.0 60.0 80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT.
WAVELENGTH.
100
IF(mA)
50% Power Angle :
Rth j-s=150 C/W
80
Ie(%)
0
80%
60
60%
40
Rth j-a=300 C/W
20
0
40%
20%
T ( C)
0
20
40
60
80
100
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
TEMPERATURE. DERATING BASED ON Tjmax=110 C
Items
Signatures
Date
Prepared by
Meiliping
2005-08-17
Rev.No
Checked by
XieJH
2005-08-17
02
Approved by
DavidLiu
2005-08-17
FCN#
-60
-30
0
30
60
90
0%
FIG.6 FAR FIELD PATTERN
Revision History
Date
Change Description
2005-08-17 Release.
FCN20050260
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered
trademarks
of Cree, Inc.
[email protected]
Cotco
International
Ltd.
100%
CLD-CT185.000
4/4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074
REV.4
Document No. SPE/LM1-TYL1-11-N1
Rev. No.
Mechanical Dimensions
02
Dimension Drawing
All dimensions are in mm.
ations
ngs at Ta = 25°C
Absolute maximum
mbol
Rating
Unit
IF
70
mA
IFP
200
mA
VR
5
V
PD
225
mW
Topr
-40 ~ + 100
°C
Tstg
-40 ~ + 100
°C
Tj
+110
°C
th JA
300
°C /W
th JS
150
°C /W
2
y <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
cal Characteristics ( Ta = 25°C)
Symbol
Condition
Min.
Typ.
Max.
Unit
VF
IF = 50mA
---
2.6
3.2
V
VR = 5V
---
---
10
PA
450
700
---
mcd
IR
Notes
IV
IF = 50mA
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
maximum concentration
values (also referred to as the
IF =restricted
50mA materials
584 in this product
591are below the
596
nm
OD otherwise
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
amended through
= 50mA
--- April 21, 2006.
120
--deg
2 T½ (RoHS),IFas
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
2/4
CLD-CT185.000
Format #: COTCO-D-074
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LM1-TYL1-11-N1-00001
Description
SMD 120 Amber 591nm, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT185.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps