CREE LM1-EWN1-01-N2

Cree® SMD LED
Model # LM1-EWN1-01-N2
Data Sheet
120-degree, 3.2 x 2.7 mm, SMT LED in white color with water-transparent lens
Applications
•
•
•
•
Indicators
Illuminations
LCD Back Lights
Automobile Applications
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
25
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
RTHJA
450
°C/W
RTHJS
300
°C/W
Forward Current
Peak Forward Current
Junction/Ambient
Note 1
Note 2
Junction/Solder Point
Notes:
1.
2.
Pulse width ≤0.1 msec, duty ≤1/10.
Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2)
D-CT163.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C )
Characteristics
Symbol
Condition
Forward Voltage
VF
IF = 20 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Flux
θV
IF = 20 mA
mlm
Luminous Intensity
IV
IF = 20 mA
mcd
Chromaticity
Coordinates
x
IF = 20 mA
y
IF = 20 mA
2θ½
IF = 20 mA
50% Power Angle
Unit
Minimum
Typical
Maximum
3.4
4.0
10
2700
710
1000
0.31
0.32
deg
Subject to change without notice.
www.cree.com/ledlamps
120
Standard Bins for LM1-EWN1-01-N2 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown.
Orders for LM1-EWN1-01-N2 may be filled with any or all bins contained as below.
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA.
Luminous Intensity (IV)
A1
A2
B1
B2
c
X1 or
above
1800 mcd
W2
1400 mcd
W1
1120 mcd
V2
900 mcd
V1
710 mcd
Chromaticity Coordinates (x,y)
Rank
Chromaticity x
Coordinates y
A1
A2
0.245
0.264
0.280
0.264
0.264
0.283
0.296
0.280
0.283
0.307
0.313
0.296
0.229
0.267
0.248
0.220
0.267
0.305
0.276
0.248
0.305
0.337
0.297
0.276
Rank
Chromaticity x
Coordinates y
B1
B2
c
0.307
0.330
0.330
0.313
0.330
0.361
0.356
0.330
0.337
0.360
0.318
0.297
0.360
0.385
0.351
0.318
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of the color coordinates is ±0.01.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document.
6. Please refer to the “Cree LED Lamp Reliability Test Parameters” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the
interior of the device, which can be damaged by excessive force to the SMD surface.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT163.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE
CIE Chromaticity Diagram
0.90
520
530
0.80
540
510
550
0.70
560
0.60
570
490
0.50
Y
580
590
0.40
600
c
610
620
630
B2
0.30
B1
480
A2
A1
0.20
470
0.10
460
0.00
0.00
0.10
0.20
0.30
4/5
X
0.40
0.50
0.60
CLD-CT163.000
0.80
Format #: COTCO-D-074
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
0.70
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM1-EWN1-01-N2
Rev. No.
01
Graphs
Graphs
100.0
-40
-50
If (mA)
-30
-10
-20
0
0.0
Vr(V)
-10.0
80.0
-20.0
60.0
-30.0
40.0
-40.0
20.0
-50.0
Ir(uA)
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
Vf(V)
0.0
3.0
3.4
3.8
4.2
5.0
4.6
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Half Power WL=150nm
5.0
4.0
100%
3.0
75%
2.0
50%
1.0
25%
If(mA)
0.0
0.0
20.0 40.0 60.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
50
0%
80.0 100.0
500
600
700
800
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
IF(mA)
50% Power Angle :
40
Ie(%)
0
Rth j-s=300 C/W
100%
30
80%
20
60%
10
0
40%
Rth j-a=450 C/W
0
20
40
60
20%
T ( C)
80
100
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
TEMPERATURE. DERATING BASED ON Tjmax=110 C
Items
Signatures
Date
Prepared by
WangFJ
2007-04-10
Checked by
XieJH
2007-04-10
Approved by
DavidLiu
2007-04-10
FCN#
400
-60
-30
0
30
0%
Revision History
Rev.No
Date
Change Description
FCN20070101
[email protected] Cotco International Ltd.
CLD-CT163.000
90
FIG.6 FAR FIELD PATTERN
Copyright
© 2007
Cree, Inc.
rights reserved.
Theprior
information
in this
document
is subject
to change
without notice.
and the
Data
is subject
toAllchange
without
notice;
Please
refer
to COTCO
Website
for theCree
latest
version.
Cree logo are registered trademarks of Cree, Inc.
60
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM1-EWN1-01-N2
Rev. No.
01
Mechanical Dimensions Dimension Drawing
All dimensions are in mm.
ions
gs at Ta = 25°C
mbol
Absolute maximum
Rating
Unit
25
mA
100
mA
5
V
100
mW
-40 ~ + 100
°C
-40 ~ + 100
°C
+110
°C
JA
450
°C/W
JS
300
°C/W
F
P
R
D
pr
tg
j
2
<=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
all Characteristics ( Ta = 25°C)
ymbol
Condition
Min.
Typ.
Max.
Unit
IF = 20mA
---
3.4
4.0
V
VR = 5V
Notes
---
---
10
PA
RoHS ICompliance
F = 20mA
---
2700
---
mlm
VF
IR
ӥ˩
x
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise
restricted materials
values (also referred to as the
IF = 20mA
mcd
710 in this product
1000 are below the
--- maximum concentration
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
IF =as
20mA
--- April 21, 2006.
0.31
----(RoHS),
amended through
y
= 20mA Claim
VisionIFAdvisory
IV
2 T½
---
0.32
---
---
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
IF = 20mA
---
120
---
deg
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT163.000
2/5
Format #: COTCO-D-074
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LM1-EWN1-01-N2-00001
SMD 120 White, FULL RANK, Tape & Reel
LM1-EWN1-01-N2-00002
SMD 120 White, A1, A2, B1, B2, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT163.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps