EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Luminosity Full Color LED 61-13/S3GHBHC-B04/ET Features ․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․ESD protection. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 61-13 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications ․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. Device Selection Guide Chip Lens Color Type Material Emitted Color S3 AlGaInP Reddish Orange GH InGaN Brilliant Green BH InGaN Blue Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Package Outline Dimensions 3 2 1 4 5 6 Notes: 1.All dimensions are in millimeters. 3 2 1 4 5 6 2.Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Electrostatic Discharge IF Pd IFP ESD R6 50 GH 25 BH 25 R6 120 GH 110 BH 110 R6 100 GH 100 BH 100 R6 2000 GH 2000 BH 2000 mA mA mA V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Typ. Max. S3 180 ----- 360 GH 450 ----- 900 BH 112 ----- 225 ----- 120 ----- S3 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- S3 613.5 ----- 618.5 GH 520.0 ----- 525.0 BH 465.0 ----- 470.0 S3 ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- S3 1.8 ---- 2.4 GH 3.0 ---- 3.6 BH 3.0 --- 3.6 2θ1/2 Viewing Angle Peak Wavelength Min. λp λd △λ VF Unit Condition IF=20mA mcd IF=20mA IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA Notes: 1. 2. 3. Tolerance of Luminous Intensity ±11% Tolerance of Dominant Wavelength ±1 nm Tolerance of Dominant Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Bin Range Of Luminous Intensity Symbol Bin Code Min. Max. S1 180 225 S2 225 285 T1 285 360 U1 450 565 U2 565 715 V1 715 900 R1 112 140 R2 140 180 S1 180 225 Bin Code Min. Max. S3 ---- 613.5 618.5 GH ---- 520.0 525.0 BH ---- 465.0 470.0 S3 Iv GH BH Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Bin Range Of Dominant Wavelength Symbol λd Notes: 1. Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1 nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Bin Range Of Forward Voltage Symbol S3 VF GH BH Bin Code Min. Max. S1 1.8 2.0 S2 2.0 2.2 S3 2.2 2.4 G1 3.0 3.2 G2 3.2 3.4 G3 3.4 3.6 B1 3.0 3.2 B2 3.2 3.4 B3 3.4 3.6 Unit Condition V IF =20mA Notes: 1. Tolerance of Forward Voltage ±0.1 V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (S3) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Loaded quantity per reel 800 PCS/reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 * For each die Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 14 of 14 Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou