EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet(Preliminary) Luminosity Full Color LED 64-135/R6GHBHC-A01/2T Features ․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․ Due to the package design, 64-135 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications ․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Type R6 Material AlGaInP Emitted Color Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Package Outline Dimensions BH 3 2 4 5 1 R6 GH 3 2 1 4 5 6 6 Note: The tolerances unless mentioned is ±0.1mm;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF R6 50 GH 25 BH 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) ESD Pd IFP R6 2000 GH 2000 BH 2000 R6 120 GH 110 BH 110 R6 100 GH 100 BH 100 V mW mA Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity IV Viewing Angle Typ. Max. R6 100 200 ----- GH 160 250 ----- BH 35 70 ----- ----- 120 ----- R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 ----- 624 ----- GH ----- 525 ----- BH ----- 470 ----- R6 ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- R6 ----- 2.0 2.4 GH ----- 3.5 4.0 BH ----- 3.5 4.0 R6 ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 2θ1/2 λp Peak Wavelength λd Dominant Wavelength Spectrum Radiation Bandwidth Min. △λ Forward Voltage Reverse Current VF IR Unit Condition mcd *IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V *For each die Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves (R6) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. + + + Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 5 Low Temperature Storage 6 7 2 Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 DC Operating Life IF = 20 mA/ 25℃ 1000 Hrs. 22 PCS. 0/1 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 6 min 300 Cycles 300 Cycles Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 64-135/R6GHBHC-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 12 Device No. : Prepared date:25-Jan-2006 Prepared by: Venis Wu