EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 93-23/R6SGHB7C-A02/2T Features ․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 93-23 has low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications ․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. Device Selection Guide Chip Type Material Emitted Color R6S AlGaInP Brilliant Red GH InGaN Brilliant Green B7 InGaN Blue Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Lens Color Water Clear Rev. 1 Page: 1 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Package Outline Dimensions 3.5 2.7 3.0 1 R 2 3 G 4 5 1 3 5 2 4 6 B 6 Cathode Mark 2.7 1.85 1.85 3.5 2.95 3.0 0.3 3.5 4.5 1.1 3.0 2.7 1.7 0.5 0.8 Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 2 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @ 1KHZ) Power Dissipation Electrostatic Discharge(HBM) IFP Pd ESD R6S 50 GH 25 B7 30 R6S 100 GH 100 B7 100 R6S 120 GH 110 B7 110 R6S 2000 GH 150 B7 150 mA mA mW V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 3 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Typ. Max. R6S 180 265 ----- GH 715 1010 ----- B7 140 240 ----- ----- 120 ----- R6S ----- 632 ----- GH ----- 518 ----- B7 ----- 468 ----- R6S ----- 624 ----- GH ----- 525 ----- B7 ----- 470 ----- R6S ----- 20 ----- GH ----- 35 ----- B7 ----- 35 ----- R6S ----- 2.0 2.4 GH ----- 3.3 3.7 B7 ----- 3.3 3.7 R6S ----- ----- 10 GH ----- ----- 50 B7 ----- ----- 50 2θ1/2 Viewing Angle Peak Wavelength Min. λp λd △λ VF IR Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Unit Condition IF=20mA mcd IF=20mA IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V Rev. 1 Page: 4 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Red) Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 5 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Green) Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 6 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Typical Electro-Optical Characteristics Curves (Blue) Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 7 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 8 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Desiccant Rev. 1 Label Page: 9 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 5 Low Temperature Storage Temp. : -40℃ 6 DC Operating Life IF = 20 mA 7 High Temperature / High Humidity 85℃/ 85%RH 2 6 Min. 1000 Hrs. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 1000 Hrs. Rev. 1 Page: 10 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 11 of 12 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 93-23/R6SGHB7C-A02/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: Prepared date: 5-Sep-2006 Rev. 1 Page: 12 of 12 Prepared by: Ya_Hui Fang