PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Features . . . . Applications . Industrial instrumentation Accuracy, 1.0 FS . Pressure switch, Pneumatic device Volt level output Piggy-back style, pre-amplified and pre-compensated module . Medical device Pre-calibration of offset voltage and span Part number for ordering PSM C - 025KP G Model PSM Rated pressure(Pa) Available pressure media No mark : Non-corrosive gas only C : Non-corrosive gas and liquid (Contact us about availability) Pressure type Pressure type G : Gauge(Positive pressure) GV : Gauge(Negative pressure) GW : Gauge(Bipolar pressure) D : Differential(Positive pressure) DV : Differential(Negative pressure) DW : Differential(Bipolar pressure) Gauge pressure PSM-G Differential pressure PSM-D Package configuration Piggy-back style module Piggy-back style module Measurable pressure range (kPa) 100 100 0 100 0 25 0 50 0 100 0 200 PSM-100KPGW PSM-100KPGV PSM-025KPG PSM-050KPG PSM-100KPG PSM-200KPG Model Part number for ordering PSM-100KPDW PSM-100KPDV PSM-025KPD PSM-050KPD PSM-100KPD PSM-200KPD Specifications Model/Rated pressure 100KPGW 100KPDW 100KPGV 100KPDV 025KPG 025KPD 050KPG 050KPD 100KPG 100KPD Recommended operating conditions Pressure type Gauge pressure 100 100 25 50 100 Rated pressure 1.020 1.020 0.255 0.510 1.020 Measurable pressure range 100 100 0 100 0 25 0 50 0 100 Pressure media 1 PSM : Non-corrosive gas only, PSMC : Non-corrosive gas and liquid Excitation voltage 5 0.25 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 7 Operating temperature 20 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 5 Mechanical response time 2 (For the reference) 0.5 ( 100kPa) 0.5 (0kPa) 0.5 (0kPa) 0.5 (0kPa) 0.5 (0kPa) Output voltage 2, 3 4.5 (100kPa) 4.5 ( 100kPa) 4.5 (25kPa) 4.5 (50kPa) 4.5 (100kPa) Full scale span voltage 3 4.0 Offset voltage 2, 3 0.5 0.04 Full scale span voltage 2, 3 4.5 0.04 Accuracy 3 1.0 Note ; 1) Please consult us available when you choose the C models. 2) Output refers to pressure at pressure port 2. 3) Excluding input voltage error. 1 200KPG 200KPD Unit 200 2.040 0 200 kPa kg/cm2 kPa VDC VDC RH mA msec 0.5 (0kPa) V 4.5 (200kPa) V V V FS/0 50 PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Outline dimensions ELECTRICAL PIN CONNECTIONS unit (mm) 7 3max PIN NO. SYMBOL Pressure port 22.86 900mil Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND 11.5 12 3 22.9 Labelled faceplate Pressure sensor 0.25 8 9 6 1 14 11- 1.8 (Diameter of lands) 11- 0.9 (Diameter of through holes) 2.54 2.54 2.54 7 4.8 1.6 7max 15max Recommended footprint for PCB 0.5 2.54 12.7 2.54 5 7 ELECTRICAL PIN CONNECTIONS unit (mm) 3max Pressure port 2 PIN NO. SYMBOL Labelled faceplate 22.86 900mil 2 3.3 Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND Pressure sensor 0.8 7.5 1 14 6 5 R0.5 Recommended footprint for PCB 6max 11max 2.5 6 0.25 11.5 8 22.9 Pressure port 1 11- 1.8 (Diameter of lands) 0.5 2.54 12.7 2.54 5 22.9 2.54 2.54 2.54 2.54 7 4.8 1.6 11- 0.9 (Diameter of through holes) 2.54 PSM-D unit(mm) 22.9 20 12 2.54 17.8 2.54 12 PSM-G unit(mm) Transfer Function Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier Vs=5.0volts P=Input Pressure(kPa) Temperature Error Multiplier=1 Model 025KPG(D) 050KPG(D) 100KPG(D) 100KPGV(DV) 100KPGW(DW) 200KPG(D) pressure range 0 25kPa 0 50kPa 0 100kPa 0 100kPa 0 +100kPa 0 200kPa Vs) 0.032 0.016 0.008 0.008 0.004 0.004 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 2 E-mail : [email protected] 0.1 0.1 0.1 0.1 0.5 0.1 Pressure Error(kPa) 0.25 0.5 1.0 1.0 2.0 2.0