T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP93A8EWP/YDTG0L YELLOW Description Features The Yellow source color devices are made with Gallium I.C. COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. WIDE VIEWING ANGLE. HIGH RELIABILITY LIFE MEASURED IN YEARS. HOUSING MATERIAL: PPA PACKAGE : 500PCS / REEL. HIGH TEMPERATURE RESISTANT HOUSING. HIGH GLASS TRANSITION TEMPERATURE EPOXY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1852 REV NO: V.4 DATE: SEP/20/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004091 Selection Guide Dice Part No. WP93A8EWP/YDTG0L Iv (mcd) [2] @ 10mA Lens Type YELLOW (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2 θ 1/2 5 12 60° YELLOW DIFFUSED Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1852 REV NO: V.4 DATE: SEP/20/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004091 Yellow WP93A8EWP/YDTG0L SPEC NO: DSAF1852 REV NO: V.4 DATE: SEP/20/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004091 WP93A8EWP/YDTG0L Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1852 REV NO: V.4 DATE: SEP/20/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004091 PACKING & LABEL SPECIFICATIONS WP93A8EWP/YDTG0L SPEC NO: DSAF1852 REV NO: V.4 DATE: SEP/20/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004091