S2GBL20-C ~ S2GBL80-C Voltage 200V ~ 800V 2.0 Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product FEATURES GBL Ideal for printed circuit board Low forward voltage drop, high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product These are Halogen & Pb Free components This series is UL recognized under Component Index, file number E255340 REF. A B C D E Millimeter Min. Max. 19.6 20.6 10.7 11.3 2.3 2.7 12.7 14.2 1.3 1.7 REF. F G H I J Millimeter Min. Max. 0.9 1.15 3.3 3.7 4.8 5.3 0.8 1.2 0.3 0.6 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Maximum Recurrent Peak Reverse Voltage Average Rectified Output Current @50HZ sine wave, R-load, TA=25°C Symbol VRRM Unit S2GBL20-C S2GBL40-C S2GBL60-C S2GBL80-C 200 400 600 800 V IO 2 A Peak Forward Surge Current @ 50HZ sine wave, 1 cycle, TA=25°C IFSM 80 A Maximum Peak Forward Voltage2 VFM 0.95 V IRRM 10 μA I2 t 34 A2s Typical Thermal Resistance(without heat sink) RθJA 47 °C/W Typical Thermal Resistance(without heat sink) RθJL 10 °C/W TJ,TSTG 150, -40~150 °C Peak Reverse Current 1 2 I t Rating for Fusing @1ms≤t＜8.3ms, TJ=25°C,Rating of per diode Operating and Storage temperature range Notes： 1. VRM=VRRM, Pulse measurement, Rating of per diode. 2. IFM=1A, Pulse measurement, Rating of per diode http://www.SeCoSGmbH.com/ 25-Apr-2013 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 S2GBL20-C ~ S2GBL80-C Elektronische Bauelemente Voltage 200V ~ 800V 2.0 Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 25-Apr-2013 Rev. B Any changes of specification will not be informed individually. Page 2 of 2