CREE CP12200-EVA-WW

PRODUCT DATASHEET
Eva series
last update 31/7/2012
Ordering number CP12196_EVA-S
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw, glue
Ready
FWHM
Efficiency
cd/lm
Gerber File
13 degrees
94 %
Available
FWHM
Efficiency
cd/lm
Gerber File
15.5+39 degrees
86 %
3.300
Available
FWHM
Efficiency
cd/lm
Gerber File
15.5+39 degrees
86 %
3.300
Available
FWHM
Efficiency
cd/lm
Gerber File
20 degrees
91 %
Available
Ordering number CA12859_EVA-O
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17.2 mm
Round
PMMA
PC
Tape
Ready
Ordering number CP12860_EVA-O
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw
Ready
Ordering number CP12197_EVA-D
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw, glue
Ready
October 19th 2012 21:19 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Eva series
last update 31/7/2012
Ordering number CP12198_EVA-M
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw, glue
Ready
FWHM
Efficiency
cd/lm
Gerber File
24 degrees
88 %
Available
FWHM
Efficiency
cd/lm
Gerber File
40 degrees
79 %
Available
FWHM
Efficiency
cd/lm
Gerber File
64 degrees
77 %
Available
Ordering number CP12199_EVA-W
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw, glue
Ready
Ordering number CP12200_EVA-WW
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
Eva
Assembly
XM-L
Black
37.7 mm
17 mm
Round
PMMA
PC
Screw, glue
Ready
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
October 19th 2012 21:19 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Eva series
last update 31/7/2012
GENERAL INFORMATION
- Product series especially designed & optimized for XM-L series of LEDs.
- Special care taken to make light distribution as uniform as possible.
- Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220
degrees of Fahrenheit). Allows use of high current and temperature conditions.
Please find more information about used material from below:
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
- Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit).
- Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by
clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf
- Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue
options.
http://www.ledil.com/datasheets/DataSheet_GLUES.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end
product. For example, mechanical stress, vibration and holes on the surface of the circuit boar
weaken the strength of the tape.
NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and
balanced with fastening surface. Slanted assembly might cause unbalanced bond to the
surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt.
If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your
LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or
other electronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fiber
cloth may be used to remove fingerprints or other traces from handling.
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end
product. For example, mechanical stress, vibration and holes on the surface of the circuit boar
weaken the strength of the glue.
NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If
cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED
manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other
electronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fiber
cloth may be used to remove fingerprints or other traces from handling.
October 19th 2012 21:19 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001