Photodiode EPD-525-0-1.4 22.04.2008 rev. 01 Wavelength Type Technology Case Green, selective Integrated filter GaP TO-18 Description +0,1 -0,1 Ø 4,22 Cathode 2,54 Ø 5,33 Ø 4,65 -0,1 Ø 0,44 -0,03 +0,1 -0,1 +0,025 -0,025 Ø 5,4 +0,03 3,5 0,2 Narrow bandwidth and high spectral sensitivity in the green visible range (500…600 nm), mounted in hermetically sealed T0-18 package. Applications Anode 13,4 +1,6 -1,6 0,23 Alarm systems, light barriers, special sensors for automotive industry, for nearly Vλ matched detectors +0,075 TO-18 Miscellaneous Parameters Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit A 1.79 mm² TCID 4.7 %/K Operating temperature range Tamb -40 to +125 °C Storage temperature range Tstg -40 to +125 °C Typ Max Unit 30 pA Active area Temperature coefficient of ID T = -40…120°C Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Parameter Test conditions Symbol Dark current VR = 5 V ID 5 Peak sensitivity wavelength VR = 0 V λp 525 nm Responsivity at λP VR = 0 V Sλ 0.08 A/W VR = 0 V λmin, λmax VR = 0 V ∆λ0.5 75 Shunt resistance VR = 10 mV RSH 200 Noise equivalent power λ = 525 nm Specific detectivity λ = 525 nm D* Junction capacitance VR = 0 V CJ 180 pF Switching time (RL = 50 Ω) VR = 1 V tr, tf 35 ns Sensitivity range at 1% 1) Spectral bandwidth at 50% 1) 2) Min 410 NEP 580 nm nm GΩ -14 W/ Hz 13 cm ⋅ Hz ⋅ W −1 10.6x10 1.26x10 for information only Standard light source with a color temperature of 2856 K Labeling Type Lot N° Typ. Sλ [A/W] Quantity EPD-525-0-1.4 *Note: All measurements carried out with EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each application by the customers themselves. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Photodiode EPD-525-0-1.4 22.04.2008 Optical Responsivity (typically) Relative Photocurrent vs. Temperature 1,30 1,0 UR = 5V TK = 0,25%/K 1,25 0,8 1,20 1,15 Relative Photocu rren t Sensitivity (arb. units) rev. 01 0,6 0,4 1,10 1,05 1,00 0,95 0,2 0,90 0,85 0,0 400 450 500 550 600 0,80 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Wavelength [nm] Dark Current vs. Temperature 100 Allowable Soldering Profile UR = 5V TK = 1,05 times/K D ark Cu rrent (p A) 10 1 0,1 -40 -20 0 20 40 60 80 100 120 Temperature (°C) We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each application by the customers themselves. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545