STATSHIELD® METAL-OUT SERIES Specifications: Date & Lot Code Printed for QC Traceablility Side Weld Seals 3/8 in. (±0.10) High Performance Static Dissipative Abrasion Resistant Coating Aluminum Shielding Layer Low Charging Static Dissipative Proprietary Polyester Layer Low Charging Static Dissipative Proprietary Inner Polyethylene Layer Electrical Properties Surface Resistance: Outer Surface Inner Surface Static Shielding Charge Generation (nC/in2) Capacitance Probe (to dissipate 1 KV) Typical Values Test Procedures/Method <10E8 ohms <10E11 ohms <25 nJ Teflon: -0.03 Quartz: +0.10 <30 volts ANSI/ESD STM11.11 ANSI/ESD STM11.11 ANSI/ESD STM11.31, EIA 541 Modified Incline Plane Modified Incline Plane ANSI/EIA-541/Appendix E, 1kV Discharge Physical Properties: Bag Thickness: Thickness Width (Inside Dimensions) Length (Inside Dimensions) Light Transmission Tensile Puncture Resistance MVTR Heat Seal Outgassing Non-corrosive Nominal .0030" (.0762mm) ±10% Nominal -0" / + .125" Nominal ± .125" 40% (Tobias) 9000 PSI >10 lbs 0.40 >10 lbs/in. Pass Pass MIL-STD-3010, 1003 Chemical Properties Corrosion: No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel Polycarbonate compatible: Contains no Amines, Amides, or N-Octanoic Acid. ASTM D-1003 ASTM D882 MIL-STD-3010, 2065 ASTM F-1249 375°F, 1/2 sec 60 psi ASTM E595 MIL-STD-3010, M3005 Bag is free of amines, N-octanoic acid, silicones, and heavy metals. ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” RoHS and REACH Compliance Statement None of the RoHS restricted materials or REACH substances of very high concern are intentionally added in manufacturing this product. Ref: Directive 2002/95/EC Article 4.1. and Regulation (EC) No. 1907/2006. See Desco Industries Inc. Limited Warranty at Desco.com. Mixed Unsortable Plastic Scrap 7 Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20. Statshield® and Statfree® are Registered Trademarks of Desco Industries Inc. Desco’s bags are recyclable Statshield® bags are packaged 100 per package in an oversized shielding bag. Shelf life of bags is minimum one year in normal indoor storage conditions. STATSHIELD® BAG, SHIELDING, METAL-OUT CONSTRUCTION, .0030" (.0762mm) DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 © 2011 DESCO INDUSTRIES INC. Employee Owned Made in the United States of America Specifications and procedures subject to change without notice. DRAWING NUMBER 13010 DATE: October 2011