ESD High Temp Masking Tape Tape is wound on a paper core. The user must determine the suitability for use of the product for its intended use Used in applications masking PCB gold features for wave soldering • Waterproof • Does tribocharge, but has minimal charge retention • 7 mil (0.18 mm) total thickness • Adhesive surface 1.2 x 10E11 ohms • Film resistance < 1 x 10E11 ohms tested per ANSI/ESD S11.11 at 50% RH • Max Temp 135°C (275°F) 45 minutes max • Non-toxic, and pH neutral • Non-corrosive • Tensile: 22 lbs./in. • Adhesion to Steel: 35 oz./inch2 • Elongation: 8% • Temperature Range: -32°F to +275°F • Adhesive Mass: Natural Rubber • Adhesive: Non-Staining, • Excellent Conformability • Made in Canada Note: Waterproof release coating does generate static charges during unrolling. We recommend slow unwinding, utilizing an Ionizer to neutralize charge. Wescorp* Tape Storage and Limited Warranty: The user must determine the suitability for use of an antistatic tape for his particular application. For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated (flipped over to the other side) periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F (20°C) and be protected from exposure to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat.Tape over one year old should be evaluated by the user to determine acceptability for the user’s application. Protektive Pak recommends those tracking useful life of product to use shipping/invoice date as Protektive Pak expressly warrants that for a period of one (1) year from the date of purchase, our Wescorp Brand Antistatic Tape will be free of defects in material (parts) and workmanship (labor). See details of limited warranty online at http://www.ProtektivePak.com/Warranty.aspx. *Wescorp is a Desco Industries brand. Width - See Table Tape ESD High Temp Masking Width tolerance ±1/32" (±0.8mm) 0.5" (13mm) .75" (19mm) 1" (25mm) 47020 Tape widths are nominal metric ±0.8 mm (±1/32"). 1/2" is 12 mm nominal or 0.472" 3/4" is 18 mm nominal or 0.709" 1" is 24 mm nominal or 0.945" 47021 47022 Core Length 3"(76mm) 60 yds RoHS Compliance Statement None of the following materials are intentionally added in manufacturing this product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Protektive Pak Inc. letter on-line at ProtektivePak.com. Specifications and procedures subject to change without notice. WESCORP ESD HIGH TEMP MASKING TAPE, PAPER CORE PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578, FAX (909) 363-7331 www.ProtektivePak.com © 2011 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER: 47020 DATE: December 2011