857031 826 MHz Notch Filter Applications • • • BC0 notch filter for SVLTE applications Applicable passbands: 751 MHz B13 LTE, 782 MHz B13 LTE Handsets Product Features Functional Block Diagram Top view • • • • • • • High linear notch filter Usable reject band 4 MHz Low loss in 746-756 MHz/777-787 MHz High BC0 attenuation Ceramic chip-scale Package (CSP) Small Size: 2.5 x 2.00 x 0.56 mm Hermetic RoHS compliant, Pb-free Gnd Gnd Output GndGnd 11 10 Gnd 9 7 13 6 Gnd 12 1 8 2 3 4 Gnd 5 Gnd Gnd Input Gnd Gnd General Description Pin Configuration The 857031 is a high performance Surface Acoustic Wave (SAW) Notch Filter designed to reject emissions in the BC0 band while passing Band 13 LTE band. Pin # SE-Balanced Description 3 Input 9 1,2,4,5,7,8,10,11 6,12,13 Output Ground Case Ground 857031 is specifically designed to enable simultaneous voice and LTE for Band 13 application. It is specified to support Band 13 requirements in the entire 746 - 787 MHz band. The 857031 uses advanced packaging techniques to achieve an industry-leading 2.5 x 2.0 x 0.56 mm package. The filter exhibits excellent power handling capabilities. Ordering Information Part No. Description 857031 857031-EVB packaged part evaluation board Standard T/R size = 10,000 units/reel. Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 1 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +85 ºC Parameter (3) Conditions Center Frequency 746 – 756 MHz 777– 787 MHz 746 – 756 MHz 777– 787 MHz 824 – 828 MHz 1564 – 1574 MHz 1574 – 1577 MHz 2331 – 2361 MHz 2400 – 2484 MHz 746 – 756 MHz 777– 787 MHz Maximum Insertion Loss Amplitude Variation Absolute Attenuation Input /Output Return Loss IMD3 product (5) Source Impedance (single-ended) (5) Load Impedance (single-ended) (5) Min Typical (4) Max Units - 826 - MHz 28 2 2 5 5 15 15 0.5 0.65 0.05 0.15 32 4 4 8 8 20 20 0.75 0.9 0.1 0.25 - dB dB dB p-p dB p-p dB dB dB dB dB dB dB - -105 - 50 - Ω - 50 - Ω dBm Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. All power levels are referenced to the antenna port. Two CW tones are applied at frequencies f1 and f2, and the resultant intermodulation product in the 746-756 MHz band is measured. The first tone (f1 = 785 to 787 MHz, 24 dBm referenced to the antenna port) is applied at the input port. The second tone (f2 = 824 to 828 MHz, 13 dBm referenced to the antenna port) is applied at the output port. The intermodulation product is measured at 746 to 750 MHz Absolute Maximum Ratings (6) Parameter Rating Operating Temperature Storage Temperature Input Power(7) -30 to +85 oC -40 to +85 oC +29 dBm 6. Operation of this device outside the parameter ranges given above may cause permanent damage. 7. All ports matched to 50 Ohms. (55oC, equivalent 5000 hours). Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 2 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter Reference Design 50Ω Ω SE In In, 50Ω Ω SE Out Schematic 9 3 Input Single-ended Ω 50Ω FRONT END ANTENNA 10 nH 10 nH 1,2,4,5,6,7,8 10,11,12,13 Output Single-ended 50Ω Ω Notes: Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 2.35 1.33 0.40 11 10 9 8 7 0.55 1.85 13 12 1 2 0.19x45° CHAMF. Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm .2µm thick Hole plating: Copper min .0008µm thick 3 6 4 5 0.20 0.31 Notes: 1. Top view of the product. 2. All dimensions are in millimeters. 3. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 10 nH Coil Wire Wire-wound, 0402, y% MuRata LQW15AN10NH00 LQW15AN L2 10 nH Coil Wire Wire-wound, 0402, y% MuRata LQW15AN10NH00 LQW15AN SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 9602 PCB N/A 3-layer layer Multiple 960930 960 Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 3 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter Typical Performance (at room temperature) Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 4 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter Mechanical Information Package Information, Dimensions and Marking MFG site Marking Code Package Style: CSP-10GT Dimensions: 2.5 x 2.00 x 0.56 mm *GJ M Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2-6µm Ni plating WWY ID dot Date code All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code Tape and Reel Information Standard T/R size = 10,000 units/reel. All dimensions are in millimeters 8.8 2.7 Ø330 ID dot 4.0 0.3 2.0 Ø1.5 A 1.75 3.5 Ø102 Direction of travel Ø20.2 Ø13.0 2.75 8.0 2.0 1.1 Section A-A Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. 2.23 4.0 Ø1.0 A - 5 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260°C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 0 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes ≤ 150 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: • Halogen Free (Chlorine, Bromine) • Antimony Free • TBBP-A (C15H12Br402) Free • PFOS Free • SVHC Free ESD Rating: M1 Value: Passes ≤ 100 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: [email protected] Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: [email protected] Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 6 of 7 Connecting the Digital World to the Global Network 857031 826 MHz Notch Filter TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev B 01/19/12 © 2011 TriQuint Semiconductor, Inc. - 7 of 7 Connecting the Digital World to the Global Network