Product specification GS1A ～ GS1M ■ Features ● For surface mounted applications ● Low profile package ● Built-in strain relief ● Easy pick and place ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ■ Maximum Ratings And Electrical Characteristics at 25℃ Parameter Symbol GS1A GS1B GS1D GS1G GS1J GS1K GS1M Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 100 Maximum Average Forward Rectified Current,at TL=75℃ I(AV) 1.0 A IFSM 30.0 A VF 1.10 V Peak Forward Surge Current 8.3ms single half sine-wave V superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current TA=25℃ IR at Rated DC Blocking Voltage TA=125℃ Maximum Reverse Recovery Time(Note 1) TJ=25℃ 5.0 200 μA μs TRR 2.5 pF CJ 15 Maximum Thermal Resistance(Note 3) RθJA RθJA 30 ℃/W Operating and Storage Temperature Range TJ,TSTG -65 to +150 ℃ Typical Junction Capacitance (Note 2) Note 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and applied Vr = 4.0 V. 3. 8.0 mm2 ( .013mm thick ) land areas. http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification GS1A ～ GS1M ■ Typical Characteristics IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE OUTPUT CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Resistive or inductive load 0 40 60 80 100 120 140 160 10 1.0 0.1 Tj = 25°C PULSE WIDTH = 300µs 2% DUTY CYCLE 0.01 0 180 TL , LEAD TEMPERATURE ( °C ) Fig. 1 Forward Current Derating Curve IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) 8.3ms Single half sine-wave JEDEC Method 25 20 15 10 5 10 1.2 1.6 1000 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 100 NUMBER OF CYCLES @ 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current http://www.twtysemi.com 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 1 0.4 [email protected] 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 4008-318-123 2 of2