PD- 91769 IRG4CH40UB IRG4CH40UB IGBT Die in Wafer Form C 1200 V Size 4 Ultra-Fast Speed 6" Wafer G E Electrical Characteristics ( Wafer Form ) Parameter VCE (on) V (BR)CES VGE(th) ICES IGES Description Collector-to-Emitter Saturation Voltage Colletor-to-Emitter Breakdown Voltage Gate Threshold Voltage Zero Gate Voltage Collector Current Gate-to-Emitter Leakage Current Guaranteed (Min/Max) 4.5V Max. 1200V Min. 3.0V Min., 6.0V Max. 300 µA Max. ± 11 µA Max. Test Conditions IC = 10A, TJ = 25°C, VGE = 15V TJ = 25°C, ICES = 250µA, VGE = 0V VGE = VCE , TJ =25°C, IC =250µA TJ = 25°C, VCE = 1200V TJ = 25°C, VGE = +/- 20V Mechanical Data Norminal Backmetal Composition, Thickness: Norminal Front Metal Composition, Thickness: Dimensions: Wafer Diameter: Wafer thickness: Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment: Recommended Die Attach Conditions Cr-Ni / V-Ag ( 1kA-2kA-.2.5kA ) 99% Al, 1% Si (4 microns) 0.170" x 0.243" 150mm, with std. < 100 > flat .015" + / -.003" 01-5242 100 Microns 0.25mm Diameter Minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300C Reference Standard IR packaged part ( for design ) : IRG4PH40U Die Outline 9/24/98