BRA144EMP Series PNP Built-in Resistor Transistor MPAK Series Inverter, Driver, Switching ADE-208-1442B (Z) Rev.2 Sep. 2001 Features • Built–in Resistor Type • Simplifies Circuit Design • Reduces Board Space • Complementary pair with BRC144EMP series Outline MPAK 3 R1 2 3 R2 1 1. Ground (Emitter) 2. Input (Base) 3. Output (Collector) 2 Note: Marking is shown in below. Device Marking R1 (kΩ Ω) R2 (kΩ Ω) BRA144EMP AG 47 47 BRA124EMP CG 22 22 BRA114EMP EG 10 10 BRA143EMP GG 4.7 4.7 BRA123EMP JG 2.2 2.2 1 BRA144EMP Series Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Supply voltage VCC –50 V VI +10 to –50 V Input voltage BRA144EMP BRA124EM +10 to –50 BRA114EMP +10 to –35 BRA143EMP +10 to –25 BRA123EMP +10 to –15 Output current IO –100 mA Total power dissipation PT* 200 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C *Value on the glass epoxy board. (10 mm × 10 mm × 0.7 mm) Rev.2, Sep. 2001, page 2 of 12 BRA144EMP Series Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test conditions Input on voltage BRA144EMP VI(on) –1.5 –4.5 V BRA124EMP –1.3 –3.0 VCC = –0.3 V, IO = –5 mA BRA114EMP –1.2 –2.4 BRA143EMP –1.1 –2.0 V VCC = –5 V, IO = –100 µA –1.1 –1.8 –1.0 –1.5 BRA124EMP –1.0 –1.5 BRA114EMP –1.0 –1.5 BRA143EMP –1.0 –1.5 BRA123EMP –1.0 –1.5 BRA123EMP Input off voltage BRA144EMP VI(off) Output saturation voltage VO(on) –0.3 V IO = –10 mA, II = –0.5 mA Output cutoff current IO(off) –0.5 µA VCC = –50 V, II = 0 DC current transfer ratio Gi 70 BRA124EMP 56 BRA114EMP 30 BRA143EMP 20 VCC = –5 V, IO = –10 mA BRA123EMP 20 VCC = –5 V, IO = –20 mA 33 47 61 BRA144EMP Input resistance BRA144EMP Resistance ratio R1 BRA124EMP 15 22 28 BRA114EMP 7 10 13 BRA143EMP 3.3 4.7 6.1 BRA123EMP 1.5 2.2 2.8 0.8 1.0 1.2 R1/R2 VCC = –5 V, IO = –5 mA kΩ Rev.2, Sep. 2001, page 3 of 12 BRA144EMP Series Total Power Dissipation Curve Total Power Dissipation PT * (mW) 200 *Value on the grass epoxy board. (10 mm × 10 mm × 0.7 mm) 150 100 50 0 50 100 150 Ambient Temperature Ta (°C) Rev.2, Sep. 2001, page 4 of 12 200 BRA144EMP Series Main Characteristics (BRA144EMP) Output Current vs. Supply Voltage –0.6 –0.5 –60 –0.4 –40 –0.3 –0.2 –20 DC Current Gain vs. Output Current VCC = –5 V RL = 0 Pulse test –1 –2 –3 –4 Supply Voltage VCC (V) 25˚C Ta = –25˚C Output Current IO (mA) –10 –10 Ta = –25 ˚C –1.0 25 ˚C 75˚C –0.1 –0.1 –1.0 –10 Output Current IO (mA) 0 –1 –5 Input Voltage vs. Output Current VCC = –0.3 V RL = 0 Pulse test –100 75˚C 100 II = –0.1 mA –100 VI (V) 200 DC Current Gain Gi –80 0 Input Voltage –1.0 –0.9 –0.8 –0.7 RL = 0 Pulse test Output On Voltage VO(on) (V) Output Current IO (mA) –100 –1.0 –0.1 –10 Output Current IO (mA) Output Current vs. Input Voltage VCC = –5 V RL = 0 Pulse test 75˚C –0.01 –0.001 0 –100 25˚C Ta = –25˚C –0.5 –1.0 –1.5 –2.0 Input Voltage VI (V) –2.5 Output On Voltage vs. Output Current –1.0 IO / II = 20 Pulse test Ta = –25 ˚C –0.1 25 ˚C 75 ˚C –0.01 –0.001 –0.1 –1.0 –10 –100 Output Current IO (mA) Rev.2, Sep. 2001, page 5 of 12 BRA144EMP Series Main Characteristics (BRA124EMP) Output Current vs. Supply Voltage DC Current Gain vs. Output Current 200 –1.0 –0.9 –0.8 –0.7 RL = 0 Pulse test –80 DC Current Gain Gi Output Current IO (mA) –100 –0.6 –60 –0.5 –0.4 –40 –0.3 –0.2 –20 VCC = –5 V RL = 0 Pulse test 100 25 ˚C II = –0.1 mA 0 –1 –2 –3 –4 Supply Voltage VCC (V) Ta = –25 ˚C 0 –1 –5 Input Voltage vs. Output Current –10 VCC = –0.3 V RL = 0 Pulse test Output Current IO (mA) Input Voltage VI (V) –100 75 ˚C –10 Ta = –25 ˚C 25 ˚C –1.0 75 ˚C –1.0 –10 Output Current IO (mA) –100 Output Current vs. Input Voltage VCC = –5 V RL = 0 Pulse test –0.1 75 ˚C 25 ˚C –0.01 Ta = –25 ˚C –1.0 –10 Output Current IO (mA) Output On Voltage VO(on) (V) –0.1 –0.1 –100 –0.5 –1.0 –1.5 –2.0 Input Voltage VI (V) Output On Voltage vs. Output Current –1.0 IO / II = 20 Pulse test Ta = –25 ˚C –0.1 75 ˚C 25 ˚C –0.01 –0.001 –0.1 Rev.2, Sep. 2001, page 6 of 12 –0.001 0 –1.0 –10 –100 Output Current IO (mA) –2.5 BRA144EMP Series Main Characteristics (BRA114EMP) Output Current vs. Supply Voltage DC Current Gain vs. Output Current 200 RL = 0 Pulse test –1.0 –0.9 –0.8 –80 DC Current Gain Gi Output Current IO (mA) –100 –0.7 –60 –0.6 –0.5 –40 –0.4 –0.3 –20 0 –1 –2 –3 –4 Supply Voltage VCC (V) 100 25 ˚C Ta = –25 ˚C 0 –1 –5 Input Voltage vs. Output Current –10 Output Current IO (mA) VCC = –0.3 V RL = 0 Pulse test –10 Ta = –25 ˚C –1.0 25 ˚C –0.1 –0.1 75 ˚C –1.0 –10 Output Current IO (mA) Output On Voltage VO(on) (V) VI (V) Input Voltage 75 ˚C –0.2 II = –0.1 mA –100 VCC = –5 V RL = 0 Pulse test –1.0 –100 Output Curent vs. Input Voltage VCC = –5 V RL = 0 Pulse test –0.1 75 ˚C –0.01 –0.001 0 –100 –10 Output Current IO (mA) 25 ˚C Ta = –25 ˚C –0.5 –1.0 –1.5 –2.0 Input Voltage VI (V) –2.5 Output On Voltage vs. Output Current –1.0 IO / II = 20 Pulse test Ta = –25 ˚C –0.1 25 ˚C 75 ˚C –0.01 –0.001 –0.1 –1.0 –10 –100 Output Current IO (mA) Rev.2, Sep. 2001, page 7 of 12 BRA144EMP Series Main Characteristics (BRA143EMP) Output Current vs. Supply Voltage DC Current Gain vs. Output Current 200 RL = 0 Pulse test –1.0 –0.9 –0.8 –80 DC Current Gain Gi Output Current IO (mA) –100 –0.7 –0.6 –60 –0.5 –40 –0.4 –20 –0.3 VCC = –5 V RL = 0 Pulse test 75 ˚C 100 25 ˚C Ta = –25 ˚C II = –0.2 mA 0 0 –1 –5 Input Voltage vs. Output Current –10 VCC = –0.3 V RL = 0 Pulse test Output Current IO (mA) Input Voltage VI (V) –100 –1 –2 –3 –4 Supply Voltage VCC (V) –10 Ta = –25 ˚C –1.0 75 ˚C –1.0 –0.1 –10 Output Current IO (mA) –100 Output Current vs. Input Voltage VCC = –5 V RL = 0 Pulse test 75 ˚C 25 ˚C Ta = –25 ˚C –0.01 25 ˚C –0.1 –0.1 –1.0 –10 Output Current IO (mA) Output On Voltage VO(on) (V) –1.0 –100 –0.5 –1.0 –1.5 –2.0 Input Voltage VI (V) Output On Voltage vs. Output Current IO / II = 20 Pulse test 25 ˚C –0.1 75 ˚C Ta = –25 ˚C –0.01 –0.001 –0.1 Rev.2, Sep. 2001, page 8 of 12 –0.001 0 –1.0 –10 –100 Output Current IO (mA) –2.5 BRA144EMP Series Main Characteristics (BRA123EMP) Output Current vs. Supply Voltage DC Current Gain vs. Output Curent 200 RL = 0 Pulse test –1.2 –1.1 –1.0 –0.9 –80 –60 DC Current Gain Gi Output Current IO (mA) –100 –0.8 –0.7 –40 –0.6 –0.5 –20 VCC = –5 V RL = 0 Pulse test 75 ˚C 100 25 ˚C Ta = –25 ˚C II = –0.4 mA 0 0 –1 –5 Input Voltage vs. Output Current –10 Output Current IO (mA) VCC = –0.3 V RL = 0 Pulse test –10 Ta = –25 ˚C –1.0 25 ˚C 75 ˚C –0.1 –0.1 –1.0 –0.1 –10 Output Current IO (mA) –100 Output Current vs. Input Voltage VCC = –5 V RL = 0 Pulse test 75 ˚C 25 ˚C –0.01 Ta = –25 ˚C –1.0 –10 Output Current IO (mA) Output On Voltage VO(on) (V) Input Voltage VI (V) –100 –1 –2 –3 –4 Supply Voltage VCC (V) –0.001 0 –100 –0.5 –1.0 –1.5 –2.0 Input Voltage VI (V) –2.5 Output On Voltage vs. Output Current –1.0 IO / II = 20 Ta = –25 ˚C Pulse test –0.1 25 ˚C 75 ˚C –0.01 –0.001 –0.1 –1.0 –10 –100 Output Current IO (mA) Rev.2, Sep. 2001, page 9 of 12 BRA144EMP Series Taping Specification There are two different size reels in MPAK packaging. Packing to “Left” direction Purchasing Identification Code Standard Reel 3000 pcs/reel: Type No. + Mark TL Large Reel 12000 pcs/reel: Type No. + Mark UL Marking face is up. Center lead goes to left. Direction of feed Rev.2, Sep. 2001, page 10 of 12 BRA144EMP Series Package Dimensions 0.65 Unit: mm 0.95 0.95 1.9 ± 0.2 + 0.10 + 0.2 − 0.6 0.16 − 0.06 2.8 0 − 0.1 0.65 1.5 ± 0.15 0.10 0.4 +− 0.05 + 0.2 1.1 − 0.1 0.3 2.95 ± 0.2 Hitachi Code JEDEC EIAJ Mass (reference value) MPAK Conforms 0.011 g Footprint MPAK 0.95 1.0 2.6 0.95 0.8 Rev.2, Sep. 2001, page 11 of 12 BRA144EMP Series Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 URL http://www.hitachisemiconductor.com/ For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://semiconductor.hitachi.com.sg Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen Postfach 201, D-85619 Feldkirchen Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Colophon 5.0 Rev.2, Sep. 2001, page 12 of 12