FSM 5 x 20mm Medium Time Lag Fuses – Low and Medium Breaking Capacity Built according to DIN 41571, data sheet 2 (June 1984) M 1,6 - 10 A 315 mA - 1,25 A 1000 Glass tube 0034.2511 – .2517 100 Ceramic tube Sand filled 10 0034.2518 – .2527 Fuse with pigtail leads 1 s Time Current Characteristics n • In Fusing time in seconds ts 0,1 1.5 • In 2.1 • In 4 • In 10 • In min. max. min. max. min. max. 315mA – 1.25A 60 min. 10 min. 40 ms 2s 5 ms 90 ms 1.6A – 10A 60 min. 30 min. 40 ms 2s 5 ms 90 ms rated current In 0,01 0,001 1 Vi lf h 2 d 3 N Multiple of rated current In 4 5 6 t I 8 10 15 Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.5 • In Operating I 2 t Series FSM mA /A / V~ C, E, D p.f. 1 G p.f. 0.7-0.8 A~ max. DIN 41571 mV typical Schurter mV max. Schurter Watts typical Schurter Watts A 2s 0034.2511 0034.2512 0034.2513 0034.2514 0034.2515 0034.2516 0034.2517 0034.2518 0034.2519 0034.2520 0034.2521 0034.2522 0034.2523 0034.2524 0034.2525 0034.2526 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A / 250V 10 A / 250V 250 230 210 190 170 160 160 160 160 160 160 160 150 140 140 120 200 160 140 140 130 70 70 150 140 130 120 120 100 100 90 80 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.8 0.9 1.0 1.2 1.5 1.7 2.0 2.6 2.8 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.6 0.7 0.8 1.0 1.3 1.4 1.7 2.3 2.3 0.33 0.41 1.5 12 11 15 23 3.5 5.0 13 21 37 95 165 240 455 0034.2527 10 120 80 2.8 2.5 255 A* / 250V 80A / 125V80A / 250V~ C C 1000A / 125V- E E 1000A / 250V~ E E 300A / 125V300A / 250V~ D D 1500A / 250V~ G G *Not mentioned in DIN 41571. Check temperature rise if fuses are used in closed type fuseholders. For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.2511.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.2511.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 147 SPT 5 x 20mm Time Lag Fuses – High Breaking Capacity Built according to IEC 127-2/5, EN 60127, SEV 1064, and SEMKO 104-1976. Recommended if the short circuit current through the fuse-link is more than 35A or 10 x I n , whichever is greater (CENELEC Jan 1, 1993). T Approvals: UL recognition 500mA-16A* File #E41599 CSA acceptance 500mA-16A* File #LR51172 VDE approval 1A-6.3A File #75036 File SEMKO approval 1A-6.3A numbers SEV approval 1A-6.3A on request * fuses with pigtail leads approved up to 8A (factory assembled only) 1 - 3,15 A 4 - 6,3 A 1000 Ceramic or glass tube Sand filled 100 10 NEW New version with gold plated caps for direct pcb mounting 1 cUL recognition 1A-16A/250V** pending VDE approval 1A-6.3A/250V** pending **Contact Schurter for part numbers Time Current Characteristics Fusing time in seconds ts 0,1 n • In 1.5 • In 2.1 • In 2.75 • In min. max. min. max. 4 • In 10 • In rated current In 0,01 0,001 1 2 3 4 5 6 8 10 min. max . min. max. SCHURTER IEC 500mA – 800mA 1A – 3.15A 60 min. 30 min. 1s 80 s 95 ms 5s 10 ms 100 ms IEC SCHURTER 4A – 6.3A 8A – 16A 60 min. 30 min. 1s 80 s 150 ms 5s 20 ms 100 ms Multiple of rated current In With pigtail leads Spool Tape according to IEC 286-1 0001.2513 0001.2514 8 10 A*/ 250V A*/ 250V UL:1,000A / 250V, p.f. 1 70 70 0001.2515 0001.2516 12.5 16 A*/ 250V A*/ 250V UL:1,000A / 125V & 500A/250V, p.f. 1 70 70 UL: 10,000A / 125V, p.f. 0.7-0.8 IEC: 1,500A / 250V, p.f. 0.7-0.8 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 Pre-arcing I 2t at 10 • ln Approvals 0.7 0.7 0.7 0.8 0.9 1.1 1.2 1.5 1.7 typical Schurter Watts 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.8 0.9 1.2 1.2 A 2s 0.50 1.55 2.30 1.10 1.86 4.35 9.20 11.7 33.7 62.4 97.5 171 • • • • • • • • • • • • • • • • • • • • • • • • 1.9 2.8 1.3 2.1 268 400 • • • • 3.1 4.0 563 1272 • • • • SEV mA / A / V~ 500 mA*/ 250V 630 mA*/ 250V 800 mA*/ 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V Power dissipation at 1.5 • In max. max. IEC 127 Schurter Watts Watts SEMKO Series SPT 0001.2501 0001.2502 0001.2503 0001.2504 0001.2505 0001.2506 0001.2507 0001.2508 0001.2509 0001.2510 0001.2511 0001.2512 A~ ac Voltage drop at In max. typical Schurter IEC 127 mV mV 360 330 260 250 180 250 150 200 130 190 120 180 100 140 100 100 90 100 90 100 70 VDE Breaking capacity CSA Rated current / rated voltage UL Order Numbers • • • • • • • • • • • • • • • • • • • • • • • • • • • *Not addressed in the standards For pigtail fuses packaged loose: reference .PT after part number (e.g. 0001.2501.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0001.2501.TR) 148 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com FST BEAB 5 x 20mm Time Lag Fuses – Low Breaking Capacity Built according to IEC 127-2/3, EN 60127, SEV 1064, DIN/VDE 0820 part 1, DIN 41662, BS 4265, and SEMKO 104-1976, with support by UL 198G. Series SP & SPT recommended if the short circuit current through the fuse- link is more than 35A or 10 x In , whichever is greater (CENELEC Jan 1, 1993). Approvals: UL recognition 32mA-16A* File #E41599 CSA acceptance 32mA-16A* File #LR51172 VDE approval 32mA-6.3A File #50910 SEMKO approval 32mA-6.3A File #51550 SEV approval 32mA-6.3A File BSI license 125mA-6.3A numbers CB certification 32-40mA, 125mA-6.3A on request BEAB approval 32-40mA, 125mA-6.3A * fuses with pigtail leads approved up to 8A (factory assembled only) Fusing time in seconds ts NEW New version with gold plated caps for direct pcb mounting cUL recognition 1A-16A/250V** pending VDE approval 1A-16A/250V** pending ** Contact Schurter for part numbers Time Current Characteristics n • In 1.5 • In 2.1 • In 2.75 • In 4 • In 10 • In min. max. min. max. min. max. min. max. 20mA – 100mA 60 min. 2 min.* 200 ms* 10 s* 40 ms 3s 10 ms 300 ms 125mA – 20A 60 min. 2 min. 600 ms 10 s 150 ms 3s 20 ms 300 ms SEV rated current In * These values are not guaranteed at 20mA Multiple of rated current In Spool With pigtail leads Tape max. IEC 127 Watts 35A / 250 V / 50 Hz / p.f. 1 10 • In 250V / 50 Hz / p.f. 1 5000 4000 3500 3000 3000 2500 2000 1900 1500 1300 1100 1000 900 300 250 150 150 150 150 120 100 100 100 100 typical Schurter mV 2700 3000 2100 950 1300 1100 1000 565 415 270 210 170 150 160 160 120 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 max. Schurter Watts 0.4 0.5 0.5 0.6 0.7 0.8 1.1 1.2 1.3 1.6 1.8 typical Schurter Watts 0.1 0.2 0.2 0.125 0.2 0.3 0.155 0.2 0.185 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.2 0.3 0.3 0.3 0.3 0.4 0.5 0.8 0.9 1.0 1.3 1.3 2.5 3.3 4.2 A 2s 0.0012 0.0019 0.0027 0.0363 0.0401 0.0570 0.107 0.064 0.230 0.256 0.238 0.544 0.768 3.0 4.35 3.85 3.30 5.50 7.45 10.5 16 21.9 47 68.3 102 190 275 520 750 1638 3057 Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • BEAB A~ max. IEC 127 mV Pre-arcing I 2 t at 10 • ln CB Power dissipation at 1.5 • In BSI Voltage drop at In VDE mA / A / V~ 20 mA*/ 250V 32 mA / 250V 40 mA / 250V 50 mA / 250V 63 mA / 250V 80 mA / 250V 100 mA / 250V 125 mA / 250V 160 mA / 250V 200 mA / 250V 250 mA / 250V 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.4 A*/ 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A* / 250V 10 A* / 250V 12.5 A* / 250V 16 A* / 250V 20 A* / 250V Breaking capacity CSA Series FST 0034.3101 0034.3102 0034.3103 0034.3104 0034.3105 0034.3106 0034.3107 0034.3108 0034.3109 0034.3110 0034.3111 0034.3112 0034.3113 0034.3114 0034.3115 0034.3116 0034.3117 0034.3118 0034.3165* 0034.3119 0034.3120 0034.3121 0034.3122 0034.3123 0034.3124 0034.3125 0034.3126 0034.3127 0034.3128 0034.3129 0034.3130 Rated current / rated voltage UL Order Numbers SEMKO according to IEC 286-1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • *Not addressed in the standards; 1.4A SEMKO approved only. For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.3101.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.3101.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 149 FTT 5 x 20mm Super Time Lag Fuses – Low Breaking Capacity TT Approvals: UL recognition 63 mA - 100 mA 63mA-4A/250V File #E41599 125 mA - 4 A 1000 100 Fuse with pigtail leads (factory assembled only) NEW 10 cUL New version with gold plated caps for direct pcb mounting recognition 50mA-4A/250V** pending ** Contact Schurter for part numbers 1 Fusing time in seconds ts Time Current Characteristics n • In 0,1 1.5 • In 2.1 • In min. max. 2.75 • In 4 • In 10 • In rated current In min. max. min. max. min. max. 0,01 0,001 1 2 3 4 5 6 63mA – 100mA 60 min. 30 min. 3s 100 s 800 ms 20 s 0.06 s 1s 125mA – 4A 60 min. 30 min. 5s 200 s 1.5 s 40 s 0.15 s 3s 8 10 Multiple of rated current In Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.5 • In Operating I 2 t Series FTT mA / A / V~ A~ max. Schurter mV typical Schurter mV max. Schurter Watts typical Schurter Watts A2 s 0034.5001 0034.5002 0034.5003 0034.5004 0034.5035 0034.5036 0034.5037 0034.5038 0034.5039 0034.5040 0034.5041 0034.5042 0034.5043 0034.5044 0034.5045 0034.5046 0034.5047 0034.5048 0034.5049 63 mA / 250V 80 mA / 250V 100 mA / 250V 125 mA / 250V 160 mA / 250V 200 mA / 250V 250 mA / 250V 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 35A / 250 V / 50 Hz / p.f. 1 5000 4500 4000 3000 2000 1500 1200 1000 1200 800 700 500 250 200 200 200 150 100 100 1000 980 870 500 450 400 330 300 225 250 200 160 150 130 100 100 90 90 80 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.22 0.27 0.30 0.27 0.30 0.33 0.35 0.36 0.40 0.44 0.47 0.54 0.54 0.57 0.65 0.80 0.85 1.0 1.15 2.4 2.5 2.8 2.2 3.7 3.7 3.7 4.2 5.6 8.0 9.0 18 20 31 71 113 230 405 476 For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.5001.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.5001.TR) 150 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 1 FSD 100'000 5 x 20mm Time Delay Fuses T ® 123456 123456 Built according to UL 248.14 (formerly 198G) and CSA C22.2 (formerly 59.2-M). Recommended over 1 /4 x 11 /4" fuses for domestic use in UL/CSA approved fuseholders and/or power entry modules where space is a limiting factor. Approvals: UL listing 100mA-2A File #E41599 CSA certification 100mA-2A File #LR51172 248.14 UL123456 198 G 100 mA - 3(test A (Istwert) 80mA - 3A value) 3,2 - 3,5 A 10'000 Replaces Series FSP 1'000 100 10 1 Fusing time in seconds t Schmelzzeit in Sekundens t s Time Current Characteristics n • In 0,1 1.1 • In 1.35 • In 2 • In rated current In 0,01 100mA – 2A min. max. min. max. 4h 1h 5s 2 min. 0,001 3 1 2 4 Multiple of rated current In 5 6 7 8 9 10 15 Spool With pigtail leads Tape according to IEC 286-1 2 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.1 • In Operating I t Approvals Series FSD mA / A / V A~ max. mV max. Watts A 2s UL CSA 0034.3972 0034.3973 0034.3974 0034.3975 0034.3976 0034.3977 0034.3978 0034.3979 0034.3980 0034.3981 0034.3982 0034.3983 0034.3984 0034.3985 0034.3986 0034.3987 100 mA / 250V 125 mA / 250V 150 mA / 250V 175 mA / 250V 187 mA / 250V 200 mA / 250V 250 mA / 250V 300 mA / 250V 375 mA / 250V 400 mA / 250V 500 mA / 250V 600 mA / 250V 700 mA / 250V 750 mA / 250V 800 mA / 250V 1 A / 250V 1550 1240 1240 1000 910 890 770 700 510 540 470 380 360 270 330 270 0.16 0.15 0.19 0.18 0.17 0.18 0.19 0.21 0.19 0.21 0.23 0.23 0.25 0.21 0.26 0.27 3.5 3.9 5.0 4.1 5.7 5.3 5.1 5.2 5.8 5.2 5.4 7.0 8.3 9.3 9.4 11 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 0034.3988 0034.3989 0034.3990 0034.3991 0034.3992 0034.3993 1.2 1.25 1.5 1.6 1.8 2 240 240 210 200 190 180 0.80 0.31 0.32 0.32 0.34 0.37 37 41 45 57 52 62 • • • • • • • • • • • • A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V 10,000A / 125V p.f. 0.7 – 0.8 35A / 250V p.f. 0.7 – 0.8 10,000A / 125V p.f. 0.7 – 0.8 100A / 250V p.f. 0.7 – 0.8 For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.3972.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.3972.TR) 152 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com