HAMAMATSU G9211_05

IMAGE SENSOR
InGaAs linear image sensor
G9211 to G9214/G9205 to G9208 series
Near infrared image sensors (0.9 to 1.67 µm / 2.55 µm)
G9211 to G9214/G9205 to G9208 series InGaAs linear image sensors are specifically designed for near infrared multichannel spectrophotometry.
These linear image sensors consist of an InGaAs photodiode array, a charge amplifier array, an offset compensation circuit, a shift register and a
timing generator formed on a CMOS chip. The charge amplifier array is made up of CMOS transistors connected to each pixel of the InGaAs
photodiode array. Signals from each pixel are read out in charge integration mode to achieve high sensitivity and stable operation in the near
infrared spectral range. The package is hermetically sealed for high reliability.
Signal processing circuits on the CMOS chip allow selecting a feedback capacitance (Cf) of 10 pF or 0.5 pF by using an external voltage input.
The image sensor operates over a wide dynamic range when Cf=10 pF and delivers high gain when Cf=0.5 pF.
Features
Applications
l Near infrared multichannel spectrophotometry
l Radiation thermometry
l Non-destructive inspection
l Wide dynamic range
l Low noise and low dark current
l Selectable gain
l Anti-saturation circuit
l CDS circuit *1
l Offset compensation circuit
l Simple operation (by built-in timing generator) *2
l High resolution: 25 µm pitch (512 ch)
l Low cross-talk
l 256 ch: 1 video line
Related products
l InGaAs multichannel detector head C8061-01, C8062-01
l Multichannel detector head controller C7557
512 ch: 2 video lines
■ Selection guide
G9211-256S
G9212-512S
G9213-256S
G9214-512S
G9205-256W
G9206-256W
G9207-256W
G9208-256W
Cooling
Number of
pixels
Pixel pitch
(µm)
One-stage
TE-cooled
256
512
256
512
50
25
50
25
Two-stage
TE-cooled
256
50
*1: CDS (Correlated Double Sampling) circuit
A major source of noise in charge amplifiers is the reset noise generated when the integration capacitance is reset. A CDS circuit greatly
reduces this reset noise by holding the signal immediately after reset to find the noise differential.
*2: Timing generator
Different signal timings must be properly set in order to operate a
shift register. In conventional image sensor operation, external PLDs
(Programmable Logic Devices) are used to input the required timing
signals. However, G9211 to G9214/G9205 to G9208 series image
sensors internally generate all timing signals on the CMOS chip just
by supplying CLK and RESET pulses. This makes it simple to set the
timings.
*3: Percentage of defective pixels
If your application requires sensors with no defective pixels, please
select G9201 series.
Pixel size
[µm (H) × µm (V)]
50
25
50
25
×
×
×
×
250
250
500
500
Spectral
response range
(µm)
Defective
pixel
0.9 to 1.67 (-10 ° C)
1 % Max. * 3
0.9
0.9
0.9
0.9
50 × 250
to
to
to
to
1.85
2.05
2.25
2.55
(-20 ° C)
(-20 ° C)
(-20 ° C)
(-20 ° C)
5 % Max.
■ Spectral response
(Typ.)
1.5
T=25 ˚C
T= -10 ˚C
T= -20 ˚C
PHOTO SENSITIVITY (A/W)
Type No.
G9207-256W
G9208-256W
G9206-256W
1.0 G9211 TO
G9214 SERIES
G9205-256W
0.5
0
0.5
1.0
1.5
2.0
2.5
3.0
WAVELENGTH (µm)
KMIRB0022EB
1
InGaAs linear image sensor
G9211 to G9214/G9205 to G9208 series
■ Absolute maximum ratings
Parameter
Clock pulse voltage
Operating temperature *4
Storage temperature *4
*4: Non condensation
Symbol
Vφ
Topr
Tstg
Value
5.5
-40 to +70
-40 to +85
Unit
V
°C
°C
■ Electrical characteristics (Ta=25 °C, Vφ=5 V )
Parameter
Symbol
Vdd
Vref
256 ch
I (Vdd)
512 ch
I (Vref)
Vss
INP
I (INP)
f
Supply voltage
Supply current
Ground
Element bias
Element bias current
Clock frequency
Clock pulse voltage
high
low
Vφ
tr φ
tf φ
tpw φ
Clock pulse rise/fall times
Clock pulse width
Reset pulse voltage
high
low
V (RES)
tr (RES)
tf (RES)
tpw (RES)
VH
VL
fV
Reset pulse rise/fall times
Reset pulse width
Video output voltage
high
low
Data rate
Min.
4.9
3.5
0.1
Vφ - 0.5
0
Typ.
5.0
1.26
45
90
1 Max.
0
4.5
1 Max.
Vφ
0
Max.
5.1
50
100
4.6
4
Vφ + 0.5
0.4
Unit
mA
V
V
mA
MHz
V
V
0
20
100
ns
200
Vφ - 0.5
0
Vφ
0
Vφ + 0.5
0.4
ns
V
V
0
20
100
ns
6000
0
-
4.5
1.26
f/8
-
ns
V
mA
V
Hz
■ Electrical and optical characteristics (G9211 to G9214 series: T=25 °C, G9205 to G9208 series: T= -20 °C)
Parameter
Peak sensitivity wavelength
Symbol
λp
G9211 to G9214 series
Min.
Typ.
Max.
-
1.55
-
G9205
G9206
G9207
G9208
G9205 to G9208 series
Min.
Typ.
Max.
1.75
1.95
2.05
2.3
30
-
Saturation charge *5
Qsat
30
RMS noise voltage
N
180
300
180
(Readout noise)
*6
Photo response non-uniformity
PRNU
±5
*5: Vφ=5 V, Cf=10 pF
*6: 50 % of saturation, integration time: 10 ms, after dark output subtraction, excluding first and last pixels.
*7: 50 % of saturation, integration time: 3 ms, after dark output subtraction, excluding first and last pixels.
300
±10
*7
Unit
µm
pC
µVrms
%
Dark current characteristics (T=25 °C)
Parameter
G9211-256S
G9212-512S
G9213-256S
G9214-512S
G9205-256W *5
G9206-256W *5
G9027-256W *5
G9208-256W *5
*5: TD= -20 °C
2
Symbol
ID
Min.
-
Typ.
2
1
4
1
15
30
200
500
Max.
10
5
20
5
60
120
800
2000
Unit
pA
InGaAs linear image sensor
G9211 to G9214/G9205 to G9208 series
■ Equivalent circuit
q
(
)
1 PIXEL
Cf=10 pF
Cf=0.5 pF
SHIFT REGISTER
OFFSET
COMPENSATION
CDS
VIDEO
PHOTODIODE
AD-TRIG
TIMING GENERATOR
Vdd
INP Vss
CLK
RESET
Vref
EXTERNAL INPUT
KMIRC0010EB
■ Timing chart
CLK
(INPUT)
RESET
(INPUT)
INTEGRATION 2 CLOCKS
TIME
8 CLOCKS 8 CLOCKS
8 × N CLOCKS (READOUT TIME)
10 CLOCKS MIN.
TRIGGER
(OUTPUT)
VIDEO
(OUTPUT)
1 ch
(n-1) ch
2 ch
■ Basic circuit connection
n ch
KMIRC0016EA
CLK
RESET
BUFFER
Vref
VIDEO
Vdd
Cf SELECT
INP
AD-TRIG
Vss
BUFFER
KMIRC0012EA
3
InGaAs linear image sensor
G9211 to G9214/G9205 to G9208 series
■ Dimensional outline (unit: mm)
63.5 ± 0.15
53.3 ± 0.15
38.1 ± 0.15
35.6 ± 0.15
15
3.0 ± 0.15
27.2 ± 0.15
20.3 ± 0.15
10.2 ± 0.15
22.9 ± 0.15
25.4 ± 0.15
28
1 2
14
A
B
ONE-STAGE TE-COOLED 6.15 3.6
6.4 ± 1
1.0 ± 0.2
B
A
INDEX MARK
TWO-STAGE TE-COOLED 7.25 4.5
(28 ×) 2.54
(28 ×)
0.46
KMIRA0011EA
■ Pin connection (top view)
256 PIXELS
512 PIXELS
Cf SELECT
RESET
TE -
TE +
AD-TRIG
Vdd
Vss
INP
CLK
THERM
THERM
CASE
RESET-EVEN
TE +
AD-TRIG-EVEN
THERM
THERM
CASE
CLK-EVEN
Vref
VIDEO
Cf SELECT
RESET-ODD
TE AD-TRIG-ODD
Vdd
Vss
INP
CLK-ODD
Vref
VIDEO-EVEN
VIDEO-ODD
KMIRC0013EA
Terminal name
Vdd
Vss
INP
Input/Output
Input
(CMOS logic compatible)
Input
(CMOS logic compatible)
Input
Input
Cf SELECT
Input
CASE
THERM
-
TE+, TE-
-
AD-TRIG
VIDEO
Vref
Output
Output
Input
CLK
RESET
Function and recommended connection
Clock pulse for operating the CMOS shift register
Reset pulse for initializing the feedback capacitance in the charge amplifier
formed on the CMOS chip. The width of the reset pulse is integration time.
Supply voltage for operating the signal processing circuit on the CMOS chip.
Ground for the signal processing circuit on the CMOS chip.
Reset voltage for the charge amplifier array on the CMOS chip.
Voltage that determines the feedback capacitance (Cf) on the CMOS chip.
Cf=10 pF at 0 V, and Cf=0.5 pF at 5 V.
This terminal is electrically connected to the package.
Thermistor for monitoring temperature inside the package.
Power supply terminal for the thermoelectric cooler that cools the photodiode
array. No connection for room temperature operation type.
Digital signal for AD conversion; positive polarity
Analog video signal; positive polarity
Reset voltage for the offset compensation circuit at the CMOS chip
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2005 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
4
Cat. No. KMIR1011E05
May 2005 DN