HITTITE HMC407MS8G

HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Typical Applications
Features
This amplifier is ideal for use as a power
amplifier for 5 - 7 GHz applications:
Gain: 15 dB
• UNII
28% PAE
• HiperLAN
Supply Voltage: +5V
Saturated Power: +29 dBm
Power Down Capability
LINEAR & POWER AMPLIFIERS - SMT
11
No External Matching Required
Functional Diagram
General Description
The HMC407MS8G & HMC407MS8GE are high
efficiency GaAs InGaP Heterojunction Bipolar
Transistor (HBT) MMIC Power amplifiers which
operate between 5 and 7 GHz. The amplifier requires
no external matching to achieve operation and is
thus truly 50 Ohm matched at input and output. The
amplifier is packaged in a low cost, surface mount
8 leaded package with an exposed base for improved RF and thermal performance. The amplifier
provides 15 dB of gain, +29 dBm of saturated power
at 28% PAE from a +5V supply voltage. Power down
capability is available to conserve current consumption when the amplifier is not in use.
Electrical Specifi cations, TA = +25° C, Vs = 5V, Vpd = 5V
Parameter
Min.
Frequency Range
Gain
10
Gain Variation Over Temperature
Input Return Loss
Min.
21
15
18
0.025
0.035
Saturated Output Power (Psat)
25
12
32
Noise Figure
37
Max.
Units
GHz
15
18
dB
0.025
0.035
dB/ °C
12
dB
15
dB
22
25
dBm
29
dBm
36
40
dBm
29
Output Third Order Intercept (IP3)
Typ.
5.6 - 6.0
15
Output Power for 1 dB Compression (P1dB)
11 - 28
Max.
12
Output Return Loss
5.5
5.5
dB
0.002 / 230
0.002 / 230
mA
Vpd = 5V
7
7
mA
tON, tOFF
30
30
ns
Supply Current (Icq)
Vpd = 0V/5V
Control Current (Ipd)
Switching Speed
Typ.
5-7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
20
15
16
5
S21
S11
S22
0
GAIN (dB)
RESPONSE (dB)
10
-5
12
+25 C
+85 C
-40 C
8
-10
-15
11
4
0
-25
2
3
4
5
6
7
8
9
4
10
4.5
5
Input Return Loss vs. Temperature
6
6.5
7
7.5
8
Output Return Loss vs. Temperature
0
0
+25 C
+85 C
-40 C
-5
+25 C
+85 C
-40 C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
5.5
FREQUENCY (GHz)
FREQUENCY (GHz)
-10
-15
-10
-15
-20
-20
-25
4
4.5
5
5.5
6
6.5
7
7.5
8
4
4.5
5
FREQUENCY (GHz)
6
6.5
7
7.5
8
7
7.5
8
Psat vs. Temperature
34
34
30
30
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
26
22
+25 C
+85 C
-40 C
18
5.5
FREQUENCY (GHz)
LINEAR & POWER AMPLIFIERS - SMT
-20
26
+25 C
+85 C
-40 C
22
18
14
14
4
4.5
5
5.5
6
6.5
FREQUENCY (GHz)
7
7.5
8
4
4.5
5
5.5
6
6.5
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 29
HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Output IP3 vs. Temperature
44
25
39
20
34
IP3 (dBm)
30
15
10
+25 C
+85 C
-40 C
24
Pout (dBm)
Gain (dB)
PAE (%)
5
19
0
14
0
4
8
12
16
20
4
4.5
5
INPUT POWER (dBm)
6
6.5
7
7.5
8
Gain & Power vs. Supply Voltage
10
18
30
8
16
28
14
26
12
24
10
22
6
GAIN (dB)
NOISE FIGURE (dB)
Noise Figure vs. Temperature
4
+25C
+85C
-40C
2
0
20
8
5
5.5
6
6.5
7
4.75
FREQUENCY (GHz)
5
5.25
Vcc SUPPLY VOLTAGE (Vdc)
Reverse Isolation vs. Temperature
Power Down Isolation
0
0
-10
-10
ISOLATION (dB)
ISOLATION (dB)
5.5
FREQUENCY (GHz)
+25 C
+85 C
-40 C
-20
-30
-20
-30
-40
-50
-40
4
4.5
5
5.5
6
6.5
FREQUENCY (GHz)
11 - 30
29
7
7.5
8
4
5
6
7
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8
P1dB, Psat (dBm)
LINEAR & POWER AMPLIFIERS - SMT
11
Pout (dBm), GAIN (dB), PAE (%)
Power Compression @ 5.8 GHz
HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Gain, Power & Quiescent
Supply Current vs. Vpd @ 5.8 GHz
200
25
15
150
Icq
100
10
50
5
0
2.5
3
3.5
4
4.5
Icq (mA)
20
P1dB
Psat
Gain
Collector Bias Voltage (Vcc1, Vcc2)
+5.5 Vdc
Control Voltage (Vpd)
+5.5 Vdc
RF Input Power (RFIN)(Vs = Vpd = +5Vdc)
+20 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 31 mW/°C above 85 °C)
2W
Thermal Resistance
(junction to ground paddle)
32 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
5
Vpd (Vdc)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
11
LINEAR & POWER AMPLIFIERS - SMT
250
30
GAIN (dB), P1dB (dBm), Psat (dBm)
Absolute Maximum Ratings
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC407MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC407MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H407
XXXX
[2]
H407
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 31
HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Pin Descriptions
Pin Number
Function
Description
1
Vcc1
Power supply voltage for the first amplifier stage. An external bypass capacitor
of 330 pF is required as shown in the application schematic.
2
Vpd
Power control pin. For maximum power, this pin should be connected to 5V. A
higher voltage is not recommended. For lower die current, this voltage can be
reduced.
3, 6, 7
GND
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
4
RFIN
This pin is AC coupled
and matched to 50 Ohms.
5
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
8
Vcc2
Power supply voltage for the output amplifier stage. An external bypass
capacitor of 330 pF is required. This capacitor should be placed no more than
20 mils form package lead.
Interface Schematic
LINEAR & POWER AMPLIFIERS - SMT
11
Application Circuit
Note 1: Vcc1 and Vcc2 may be connected to a common Vcc.
Note 2: C2 should be located < 0.020” from Pin 8 (Vcc2).
11 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC407MS8G / 407MS8GE
v03.1006
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
Evaluation PCB
List of Materials for Evaluation PCB 104987 [1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3
2 mm DC Header
C1 - C3
330 pF Capacitor, 0603 Pkg.
C4
2.2 μF Capacitor, Tantalum
U1
HMC407MS8G / HMC407MS8GE Amplifier
PCB [2]
104628 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 33