1.6x0.8mm SMD CHIP LED LAMP KP-1608MGC Description Features ! 1.6mmx0.8mm !LOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. ! WIDE ! IDEAL MEGA GREEN The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0023 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 1 OF4 Selection Guide Par t No . Di c e KP-1608MGC Iv (mc d ) @ 20 mA L en s Ty p e MEGA GREEN ( InGaAlP ) WATER CLEAR View in g An g l e Min . Ty p . 2θ1/2 20 50 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter Dev ic e λpeak Peak Wavelength Mega Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un i t s Tes t Co n d itio n s 574 nm IF=20mA Mega Green 568 nm IF=20mA Spectral Line Halfwidth Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par am et er Me g a Gr e e n Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 205 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: KDA0023 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 2 OF4 Mega Green KP-1608MGC SPEC NO: KDA0023 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 3 OF4 KP-1608MGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0023 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/04/2001 DRAWN: S. H. CHEN PAGE: 4 OF4