LBA716 Dual Single-Pole OptoMOS® Relay Parameter Load Voltage Load Current Max On-resistance Rating 60 1 0.4 Units V A Ω Description LBA716 is 60V, 1A, 0.4Ω dual Solid State Relay integrating independent 1-Form-A and 1-Form-B relays into a single package. It features a superior combination of low on-resistance and enhanced peak load current (5A max.) handling capability. Features • 100% Solid State • Small 8-Pin Package • Low Drive Power Requirements (TTL/CMOS Compatible) • Arc-Free With No Snubbing Circuits • 3750Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount Versions • Tape & Reel available Approvals • UL Recognized Component: File # E76270 • CSA Certified Component: Certificate # 1175739 • EN/IEC 60950-1 Compliant Ordering Information Applications • Telecommunications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Utility Meters (gas, oil, electric and water) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # LBA716 LBA716S LBA716STR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ Pin Configuration TON + Control - Normally Closed – Control - Normally Closed + Control - Normally Open – Control - Normally Open 1 8 2 7 3 6 4 5 TOFF Normally Closed Switching Characteristics of Normally Closed (Form B) Devices Normally Open CONTROL + ILOAD TOFF Pb RoHS 2002/95/EC DS-LBA716-R01 90% +10% TON e3 www.clare.com 1 LBA716 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Ratings 60 5 50 1 Units VP V mA A 150 800 3750 -40 to +85 -40 to +125 mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Conditions Symbol Min Typ Max Units Form-A (Normally Open) Characteristics Load Current Continuous Peak On-resistance Off-State Leakage Current Output Capacitance Switching Speeds Turn-On Turn-Off - IL - - 1 t < 10ms IL=1A VL=60V 50V, f=1MHz ILPK RON ILEAK COUT - 0.21 105 5 0.4 1 - tON tOFF Form-B (Normally Closed) Characteristics 0.7 0.09 5 5 IF=5mA, VL=10V A Ω μA pF ms Load Current Continuous Peak On-resistance Off-State Leakage Current Output Capacitance Switching Speeds Turn-On Turn-Off Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance, Input to Output - IL - - 0.5 t < 10ms IL=0.5A VL=60V, IF=5mA IF=5mA, 50V, f=1MHz ILPK RON ILEAK COUT - 1.63 280 1.2 2 1 - IF=5mA, VL=10V tON tOFF - 0.58 0.76 5 5 ms 0.1 0.9 - 1.2 - 2 1.4 10 mA mA V μA - 3 - pF Form-A and Form-B Characteristics IL=Load Current IF IF IF=5mA VF VR=5V IR - CI/O A Ω μA pF *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R01 LBA716 PERFORMANCE DATA* 25 20 15 10 5 0 10 5 Device Count (N) 20 25 15 10 5 0.16 0.17 0.18 0.19 0.20 76 77 78 79 Blocking Voltage (VP) 15 10 5 LED Forward Current (mA) 1-Form-B Relay Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 1-Form-B Relay Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 10 5 10 5 20 0.69 0.73 0.77 0.81 LED Forward Current (mA) 0.85 1-Form-A Relay Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 15 10 5 0 0.61 0.65 0.69 0.73 Turn-Off Time (ms) 15 1.69 1-Form-A Relay Typical IF for Switch Operation (N=50, TA=25ºC, IL=200mA) 0.65 1-Form-A Relay Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 20 0.57 25 1.57 1.61 1.65 On-Resistance (Ω) 15 80 0 0.21 1.53 0 75 1-Form-B Relay Typical IF for Switch Operation (N=50, TA=25ºC, IL=200mA) 5 20 15 68.0 Device Count (N) Device Count (N) 66.0 66.5 67.0 67.5 Blocking Voltage (VP) 10 1.49 0 65.5 15 0.211 Device Count (N) Device Count (N) Device Count (N) 5 0.207 0.208 0.209 0.210 On-Resistance (Ω) 1-Form-B Relay Typical Blocking Voltage (N=50, TA=25ºC, IF=5mA) 20 10 1-Form-B Relay Typical On-Resistance (N=50, TA=25ºC, IL=5mA, IF=0mA) 0 0.206 0 Device Count (N) 5 1.225 1.230 1.235 1.240 1.245 LED Forward Voltage Drop (V) 15 20 10 1-Form-A Relay Typical Blocking Voltage (N=50, TA=25ºC) 20 0 15 0 1.220 25 20 20 Device Count (N) Device Count (N) Device Count (N) 25 1-Form-A Relay Typical On-Resistance (N=50, TA=25ºC, IL=1A, IF=5mA) Device Count (N) 30 1-Form-A & 1-Form-B Relays Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) 0.77 0.077 0.082 0.087 0.092 0.097 Turn-On Time (ms) 0.102 20 15 10 5 0 0 0.507 0.530 0.553 0.576 0.599 Turn-On Time (ms) 0.622 0.63 0.67 0.71 0.75 0.79 Turn-Off Time (ms) 0.83 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 LBA716 PERFORMANCE DATA* 20 Leakage Current (nA) 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 Temperature (ºC) 80 100 1-Form-A Relay Typical Turn-On vs. Temperature (IL=100mA) 2.5 Turn Off Time (μs) Turn On Time (ms) 1.5 IF=5mA -20 0 20 40 60 Temperature (ºC) 80 80 50 -40 AC On-Resistance (Ω) 77.4 77.3 77.2 77.1 50 67 66 65 64 63 -20 0 20 40 60 Temperature (ºC) 80 100 1-Form-A Relay Typical Turn-On vs. LED Forward Current (IL=100mA) 1200 IF=2mA 800 600 400 60 0.24 77.5 68 1000 65 100 77.6 69 62 -40 100 70 0.26 1.0 20 40 60 Temperature (ºC) IF=5mA 75 77.7 10 20 30 40 LED Forward Current (mA) 0 1-Form-A Relay Typical Turn-Off vs. Temperature (IL=100mA) 80 77.8 0 -20 200 55 1-Form-A Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) Turn-Off Time (μs) 5 85 2.0 0.5 -40 10 90 IF=2mA 1.0 15 0 -40 0.0 70 Turn-On (μs) Load Current (A) 1.0 1-Form-A Relay Typical Blocking Voltage vs. Temperature 0 -20 0 20 40 60 Temperature (ºC) 80 1-Form-A Relay Typical On-Resistance (AC) vs. Temperature (IL=500mA, IF=5mA) 0.95 0.22 0.20 0.18 0.16 0.14 0.12 -40 1-Form-A Relay Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) 0 100 LED Current (mA) 1.2 1-Form-A Relay Typical Leakage vs. Temperature Measured Across Pins 5 & 6 (VL=60V) Blocking Voltage (VP) Form-A Relay Typical Load Current vs. Temperature (IF=5mA) -20 0 20 40 60 Temperature (ºC) 80 100 10s 100s 10 20 30 40 LED Forward Current (mA) 50 1-Form-A Relay Typical IF for Switch Operation vs. Temperature (IL=200mA) 0.90 0.85 0.80 0.75 0.70 -40 -20 0 20 40 60 Temperature (ºC) 80 100 1-Form-A Relay Energy Rating Curve 6 Current (A) 0.0 -0.5 Load Current (A) 5 0.5 4 3 2 1 -1.0 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Voltage (V) 0 10μs 100μs 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 LBA716 PERFORMANCE DATA* Form-B Relay Typical Load Current vs. Temperature (IF=0mA) 0.4 0.3 0.2 0.1 -40 -20 0 20 40 60 Temperature (ºC) 80 100 1-Form-B Relay Typical Turn-On vs. Temperature (IL=100mA) 800 100 50 500 400 IF=2mA 300 IF=5mA 200 100 -40 20 40 60 Temperature (ºC) 80 -20 0 20 40 60 Temperature (ºC) 80 1.0 0.5 IF=2mA 3.0 2.5 2.0 1.5 IF=5mA 10 20 30 40 -20 0 20 40 60 Temperature (ºC) 80 0 20 40 60 Temperature (ºC) 80 100 420 419 0 1-Form-B Relay Typical On-Resistance vs. Temperature (IL=100mA, IF=0mA) 0.40 10 20 30 40 LED Forward Current (mA) 50 1-Form-B Relay Typical IF for Switch Operation vs. Temperature (IL=100mA) 0.35 1.5 1.4 1.3 -20 0 20 40 60 Temperature (ºC) 80 100 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 80 100 Temperature (ºC) 1-Form-B Relay Energy Rating Curve 1.5 1.3 Load Current (A) 0.4 0.2 0.0 -0.2 1.1 0.9 0.7 0.5 -0.4 -0.6 -1.0 -0.8 -0.5 -0.3 0.0 0.3 Voltage (V) -20 421 100 1.6 LED Forward Current (ma) 1-Form-B Relay Typical Load Voltage vs. Load Current (TA=25ºC, IF=0mA) 82 417 1.1 -40 50 84 418 1.2 0 86 422 3.5 1.8 On-Resistance (Ω) 1.5 88 423 1.7 2.0 90 1-Form-B Typical Turn-On vs. LED Forward Current (IL=100mA) 1-Form-B Relay Typical Turn-Off vs. Temperature (IL=100mA) -40 100 92 80 -40 100 0.5 2.5 Current (A) 0 1.0 1-Form-B Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) 0.6 -20 Turn-On Time (μs) Turn-Off Time (ms) Turn-On Time (μs) 150 4.0 600 Turn-Off Time (ms) 200 4.5 700 0 250 0 -40 0.0 94 300 Blocking Voltage (VP) Leakage Current (nA) Load Current (A) 0.5 350 1-Form-B Relay Typical Blocking Voltage vs. Temperature (IF=5mA) LED Current (mA) 0.6 1-Form-B Relay Typical Leakage vs.Temperature Measured Across Pins 7&8 (IF=5mA, VL=60V) 0.5 0.8 1.0 0.3 10μs 100μs 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 5 LBA716 Manufacturing Information Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Pb e3 RoHS 2002/95/EC MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 9.652 ± 0.381 (0.380 ± 0.015) PC Board Pattern 9.144 TYP. (0.360 TYP.) 9.144 ± 0.508 (0.360 ± 0.020) 8.077 ± 0.127 (0.318 ± 0.005) 8-0.800 DIA. (8-0.031 DIA.) 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 3.302 (0.130) 2.540 ± 0.127 (0.100 ± 0.005) 7.239 TYP. (0.285) 7.620 ± 0.127 (0.300 ± 0.005) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 ± 0.102 (0.035 ± 0.004) Recommended PCB Land Pattern 8-Pin Surface Mount Package 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) 4.445 ± 0.127 (0.175 ± 0.005) 3.302 (0.130) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.127 (0.010 ± 0.0005) 0.65 (0.0255) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 ± 0.102 (0.035 ± 0.004) 6 www.clare.com R01 LBA716 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 Top Cover Tape K0 = 4.90 (0.193) K1 = 4.20 (0.165) Embossed Carrier Embossment P = 12.00 (0.472) Ao = 10.30 (0.406) User Direction of Feed Bo = 10.30 (0.406) Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LBA716-R01 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/23/08