LINER LTC1867LAIGN

LTC1863L/LTC1867L
Micropower, 3V,
12-/16-Bit, 8-Channel
175ksps ADCs
U
FEATURES
DESCRIPTIO
■
The LTC®1863L/LTC1867L are pin compatible, 8-channel
12-/16-bit A/D converters with serial I/O and an internal
reference.
■
■
■
■
■
■
■
■
■
■
■
Sample Rate: 175ksps
16-Bit No Missing Codes and ±3LSB Max INL
8-Channel Multiplexer with:
Single Ended or Differential Inputs and
Unipolar or Bipolar Conversion Modes
SPI/MICROWIRETM Serial I/O
2.7V Guaranteed Supply Voltage
Pin Compatible with LTC1863/LTC1867
True Differential Inputs
On-Chip or External Reference
Low Power: 750µA at 175ksps, 300µA at 50ksps
Sleep Mode
Automatic Nap Mode Between Conversions
16-Pin Narrow SSOP Package
The 8-channel input multiplexer can be configured for
either single-ended or differential inputs and unipolar or
bipolar conversions (or combinations thereof). The ADCs
convert 0V to 2.5V unipolar inputs or ±1.25V bipolar
inputs. The ADCs typically draw only 750µA from a single
2.7V supply. The automatic nap and sleep modes benefit
power sensitive applications.
The LTC1867L’s DC performance is outstanding with a
±3LSB INL specification and 16-bit no missing codes over
temperature.
U
APPLICATIO S
■
■
■
■
Industrial Process Control
High Speed Data Acquisition
Battery Operated Systems
Multiplexed Data Acquisition Systems
Imaging Systems
, LTC and LT are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
W
■
Housed in a compact, narrow 16-pin SSOP package, the
LTC1863L/LTC1867L can be used in space-sensitive as
well as low power applications.
BLOCK DIAGRA
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM
LTC1863L/LTC1867L
1
2
15
3
4
5
6
16
14
ANALOG
INPUT
MUX
+
–
12-/16-BIT
175ksps
ADC
SERIAL
PORT
13
12
11
7
10
8
VDD
2.0
GND
1.5
SDI
VDD = 2.7V
fSAMPLE = 175ksps
1.0
SDO
SCK
CS/CONV
VREF
INTERNAL
1.25V REF
INL (LSB)
CH0
Integral Nonlinearity vs Output Code
(LTC1867L)
0.5
0
–0.5
–1.0
–1.5
9
1863L7L BD
REFCOMP
–2.0
0
16384
32768
49152
65536
OUTPUT CODE
1863L7L G01
1863L7Lf
1
LTC1863L/LTC1867L
U
W
U
PACKAGE/ORDER I FOR ATIO
W W
U
W
ABSOLUTE
AXI U RATI GS
(Notes 1, 2)
Supply Voltage (VDD) ................................... –0.3V to 6V
Analog Input Voltage
CH0-CH7/COM (Note 3) .......... – 0.3V to (VDD + 0.3V)
VREF, REFCOMP (Note 4)......... – 0.3V to (VDD + 0.3V)
Digital Input Voltage (SDI, SCK, CS/CONV)
(Note 4) .................................................– 0.3V to 10V
Digital Output Voltage (SDO) ....... – 0.3V to (VDD + 0.3V)
Power Dissipation .............................................. 500mW
Operating Temperature Range
LTC1863LC/LTC1867LC/LTC1867LAC .... 0°C to 70°C
LTC1863LI/LTC1867LI/LTC1867LAI .. – 40°C to 85°C
Storage Temperature Range ................. – 65°C to 150°C
Lead Temperature (Soldering, 10 sec).................. 300°C
ORDER PART
NUMBER
LTC1863LCGN
LTC1863LIGN
LTC1867LCGN
LTC1867LIGN
LTC1867LACGN
LTC1867LAIGN
TOP VIEW
CH0 1
16 VDD
CH1 2
15 GND
CH2 3
14 SDI
CH3 4
13 SDO
CH4 5
12 SCK
CH5 6
11 CS/CONV
CH6 7
10 VREF
CH7/COM 8
9
REFCOMP
GN PART MARKING
1863L
1863LI
1867L*
GN PACKAGE
16-LEAD NARROW PLASTIC SSOP
TJMAX = 110°C, θJA = 95°C/W
Consult LTC Marketing for parts specified with wider operating temperature ranges.
*The temperature grade is identified by a label on the shipping container.
U
CO VERTER CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VDD = 2.7V, external VREF = 1.25V (Notes 5, 6)
PARAMETER
CONDITIONS
MIN
Resolution
No Missing Codes
Integral Linearity Error
Unipolar (Note 7)
Bipolar
●
12
●
12
LTC1863L
TYP
MAX
–2
Unipolar (Note 8)
Bipolar
Offset Error Match
Unipolar
Bipolar
●
●
Offset Error Drift
Bits
±3
±3
–1
1.6
UNITS
Bits
±4
±4
0.1
Offset Error
LTC1867LA
TYP
MAX
16
±1
±1
±1
MIN
16
15
●
●
Transition Noise
LTC1867L
TYP
MAX
16
●
Differential Linearity Error
MIN
LSB
LSB
LSB
1.6
LSBRMS
±3
±4
±32
±64
±32
±64
LSB
LSB
±1
±1
±4
±4
±3
±3
LSB
LSB
±0.5
±0.5
ppm/°C
±0.5
Gain Error
Unipolar
Bipolar
±6
±6
±96
±96
±64
±64
LSB
LSB
Gain Error Match
Unipolar
Bipolar
±1
±1
±4
±4
±3
±3
LSB
LSB
Gain Error Tempco
Internal Reference
External Reference
±20
±3
±20
±3
±20
±3
ppm/°C
ppm/°C
Power Supply Sensitivity
VDD = 2.7V – 3.6V
±1
±3
±3
LSB
W U
DY A IC ACCURACY
VDD = 3V, external VREF = 1.25V (Note 5)
MIN
LTC1863L
TYP
MAX
LTC1867L/LTC1867LA
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
SNR
Signal-to-Noise Ratio
1kHz Input Signal
73.2
83.3
UNITS
dB
S/(N+D)
Signal-to-(Noise + Distortion) Ratio
1kHz Input Signal
73.1
82.6
dB
1863L7Lf
2
LTC1863L/LTC1867L
W U
DY A IC ACCURACY
THD
PARAMETER
CONDITIONS
MIN
LTC1863L
TYP
MAX
LTC1867L/LTC1867LA
MIN
TYP
MAX
UNITS
Total Harmonic Distortion
1kHz Input Signal, Up to 5th Harmonic
–92.3
– 91
dB
Peak Harmonic or Spurious Noise
1kHz Input Signal
–94.5
– 92.8
dB
Channel-to-Channel Isolation
100kHz Input Signal
–100
–112
dB
Full Power Bandwidth
–3dB Point
1.25
1.25
MHz
U
SYMBOL
VDD = 3V, external VREF = 1.25V (Note 5)
U
A ALOG I PUT
The ● denotes the specifications which apply over the full operating temperature range, otherwise
specifications are at TA = 25°C. (Note 5)
SYMBOL
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
PARAMETER
CONDITIONS
Analog Input Range
Unipolar Mode (Note 9)
Bipolar Mode
CIN
Analog Input Capacitance for CH0 to
CH7/COM
Between Conversions (Sample Mode)
During Conversions (Hold Mode)
tACQ
Sample-and-Hold Acquisition Time
Input Leakage Current
●
●
●
On Channels, CHX = 0V or VDD
U U
U
I TER AL REFERE CE CHARACTERISTICS
PARAMETER
CONDITIONS
VREF Output Voltage
IOUT = 0
2.01
UNITS
0 to 2.5
±1.25
V
V
32
4
pF
pF
1.68
µs
●
±1
µA
(Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
1.235
1.25
UNITS
1.265
V
VREF Output Tempco
IOUT = 0
±20
ppm/°C
VREF Line Regulation
2.7V ≤ VDD ≤ 3.6V
0.3
mV/V
VREF Output Resistance
⏐IOUT ⏐ ≤0.1mA
REFCOMP Output Voltage
IOUT = 0
3
kΩ
2.5
V
U
U
DIGITAL I PUTS A D DIGITAL OUTPUTS
The ● denotes the specifications which apply over the
full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
VIH
High Level Input Voltage
VDD = 3.6V
●
VIL
Low Level Input Voltage
VDD = 2.7V
●
IIN
Digital Input Current
VIN = 0V to VDD
●
CIN
Digital Input Capacitance
VOH
High Level Output Voltage (SDO)
VOL
Low Level Output Voltage (SDO)
VDD = 2.7V, IO = –10µA
VDD = 2.7V, IO = –200µA
●
VDD = 2.7V, IO = 160µA
VDD = 2.7V, IO = 1.6mA
●
1.9
2.3
UNITS
V
0.45
V
±10
µA
2
pF
2.68
2.65
V
V
0.05
0.15
0.4
V
V
ISOURCE
Output Source Current
SDO = 0V
–9.7
mA
ISINK
Output Sink Current
SDO = VDD
6
mA
Hi-Z Output Leakage
Hi-Z Output Capacitance
CS/CONV = High, SDO = 0V or VDD
CS/CONV = High (Note 10)
Data Format
Unipolar
Bipolar
●
●
±10
15
µA
pF
Straight Binary
Two’s Complement
1863L7Lf
3
LTC1863L/LTC1867L
U W
POWER REQUIRE E TS
The ● denotes the specifications which apply over the full operating temperature
range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
VDD
Supply Voltage
(Note 9)
IDD
Supply Current
fSAMPLE = 175ksps, Internal REF
NAP Mode
SLEEP Mode
●
PDISS
Power Dissipation
fSAMPLE = 175ksps
2.7
UNITS
3.6
1
V
●
0.75
170
0.2
3
mA
µA
µA
●
2
2.7
mW
WU
TI I G CHARACTERISTICS
The ● denotes the specifications which apply over the full operating temperature
range, otherwise specifications are at TA = 25°C. (Note 5)
LTC1863L/LTC1867L/LTC1867LA
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
fSAMPLE
Maximum Sampling Frequency
●
tCONV
Conversion Time
●
tACQ
Acquisition Time
●
fSCK
SCK Frequency
t1
CS/CONV High Time
Short CS/CONV Pulse Mode
●
t2
SDO Valid After SCK↓
CL = 25pF (Note 11)
●
t3
SDO Valid Hold Time After SCK↓
CL = 25pF
●
t4
SDO Valid After CS/CONV↓
CL = 25pF
●
t5
SDI Setup Time Before SCK↑
●
15
–6
ns
t6
SDI Hold Time After SCK↑
●
15
6
ns
t7
SLEEP Mode Wake-Up Time
CREFCOMP = 10µF, CVREF = 2.2µF
80
ms
t8
Bus Relinquish Time After CS/CONV↑
CL = 25pF
Note 1: Absolute Maximum Ratings are those values beyond which the life
of a device may be impaired.
Note 2: All voltage values are with respect to GND (unless otherwise
noted).
Note 3: When these pin voltages are taken below GND or above VDD, they
will be clamped by internal diodes. This product can handle input currents
of greater than 100mA without latchup.
Note 4: When these pin voltages are taken below GND, they will be
clamped by internal diodes. This product can handle input currents of
greater than 100mA below GND without latchup. These pins are not
clamped to VDD.
Note 5: VDD = 2.7V, fSAMPLE = 175ksps and fSCK = 20MHz at 25°C,
t r = t f = 5ns and VIN – = 1.25V for bipolar mode unless otherwise specified.
Note 6: Linearity, offset and gain error specifications apply for both
unipolar and bipolar modes. The INL and DNL are tested in bipolar mode.
Note 7: Integral nonlinearity is defined as the deviation of a code from a
straight line passing through the actual endpoints of the transfer curve.
The deviation is measured from the center of the quantization band.
●
175
kHz
3.2
2.01
UNITS
3.7
µs
20
MHz
1.68
40
100
5
17
22
20
30
µs
ns
47
ns
ns
40
50
ns
ns
Note 8: Unipolar offset is the offset voltage measured from +1/2LSB
when the output code flickers between 0000 0000 0000 0000 and
0000 0000 0000 0001 for LTC1867L and between 0000 0000 0000 and
0000 0000 0001 for LTC1863L. Bipolar offset is the offset voltage
measured from –1/2LSB when output code flickers between 0000 0000
0000 0000 and 1111 1111 1111 1111 for LTC1867L, and between
0000 0000 0000 and 1111 1111 1111 for LTC1863L.
Note 9: Recommended operating conditions. The input range of ±1.25V
for bipolar mode is measured with respect to VIN – = 1.25V. For unipolar
mode, common mode input range is 0V to VDD for the positive input and
0V to 1.5V for the negative input. For bipolar mode, common mode input
range is 0V to VDD for both positive and negative inputs.
Note 10: Guaranteed by design, not subject to test.
Note 11: t2 of 47ns maximum allows fSCK up to 10MHz for rising capture
with 50% duty cycle and fSCK up to 20MHz for falling capture (with 3ns
setup time for the receiving logic).
1863L7Lf
4
LTC1863L/LTC1867L
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Integral Nonlinearity
vs Output Code
2.0
VDD = 2.7V
fSAMPLE = 175ksps
0.5
0.5
DNL (LSB)
1.0
0
–0.5
–1.0
–1.0
–1.5
–1.5
0
16384
32768
–2.0
65536
49152
–140
0
32768
16384
–80
–100
–120
65.625
FREQUENCY (kHz)
100
90
SNR
80
–90
–100
ADJACENT PAIR
–110
–120
87.5
SINAD
60
50
VDD = 3V
30 INTERNAL REF
fSAMPLE = 175ksps
20
1
10
INPUT FREQUENCY (kHz)
1863L7L G05
1863L7L G04
Total Harmonic Distortion
vs Input Frequency
Supply Current vs fSAMPLE
(LTC1863L/LTC1867L)
800
–20
–80
SFDR
–70
THD
–60
–50
–40
VDD = 3V
–30 fSAMPLE = 175ksps
VRIPPLE = 10mVP-P
–40
–50
–60
–70
–80
1863L7L G06
600
500
400
300
200
–90
100
–100
100
VDD = 2.7V
700
SUPPLY CURRENT (µA)
POWER SUPPLY FEEDTHROUGH (dB)
–90
100
1863L7L G06
Power Supply Feedthrough
vs Ripple Frequency
–100
AMPLITUDE (dB)
70
40
NONADJACENT
PAIR
–140
0.1
10
100
1000
1
ACTIVE CHANNEL INPUT FREQUENCY (kHz)
–140
87.5
Signal-to-(Noise + Distortion)
Ratio vs Input Frequency
–80
–130
VDD = 3V
–30 INTERNAL REF
fSAMPLE = 175ksps
–20
1
10
INPUT FREQUENCY (kHz)
43.75
65.625
FREQUENCY (kHz)
1863L7L G03
VDD = 3V
fSAMPLE = 175ksps
–70
RESULTING AMPLITUDE ON
SELECTED CHANNEL (dB)
AMPLITUDE (dB)
–60
43.75
21.875
1863L7L G02
–60
21.875
0
65536
49152
Crosstalk vs Input Frequency
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 84.7dB
SINAD = 83.5dB
THD = 90dB
0
–80
OUTPUT CODE
4096 Points FFT Plot
(VDD = 3V, REFCOMP = Ext 3V)
–40
–60
–120
1863L7L G01
–20
–40
–100
OUTPUT CODE
0
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 82.9dB
SINAD = 81.4dB
THD = 86.8dB
–20
0
–0.5
–2.0
0
VDD = 2.7V
fSAMPLE = 175ksps
1.5
1.0
4096 Points FFT Plot
(VDD = 2.7V, Internal REF)
AMPLITUDE (dB)
1.5
INL (LSB)
Differential Nonlinearity
vs Output Code
AMPLITUDE (dB)
2.0
(LTC1867L)
1
10
100
RIPPLE FREQUENCY (kHz)
1000
1863L7L G08
1
10
100
fSAMPLE (ksps)
1000
1863L7L G09
1863L7Lf
5
LTC1863L/LTC1867L
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Supply Current vs Supply Voltage
1200
(LTC1863L/LTC1867L)
Histogram for 4096 Conversions
(LTC1867L)
Supply Current vs Temperature
1500
fSAMPLE = 175ksps
1200
fSAMPLE = 175ksps
INTERNAL REF
1000
1000
900
800
895
1250
830
3.6VDD
800
COUNTS
SUPPLY CURRENT (µA)
SUPPLY CURRENT (µA)
1100
3.3VDD
1000
3VDD
2.7VDD
750
465
333
261
170
200
2.7
3
3.3
SUPPLY VOLTAGE (V)
500
–50
3.6
0
–25
75
0
25
50
TEMPERATURE (°C)
58
23 9
2.505
2.495
2.490
2.485
15
VDD = 2.7V
fSAMPLE = 175ksps
EXT VREF = 1.25V
UNIPOLAR
MODE
VDD = 2.7V
fSAMPLE = 175ksps
EXT VREF = 1.25V
UNIPOLAR/BIPOLAR
10
5
UNIPOLAR OFFSET (LSB)
2.500
Gain Error Drift (LTC1867L)
vs Temperature
UNIPOLAR OFFSET (LSB)
10
VDD = 2.7V
1
20 21 22 23 24 25 26 27 28 29 30 31
CODE
1863L7L G12
Offset Drift (LTC1867L)
vs Temperature
REFCOMP vs Load Current
2.510
100
7
1863L7L G11
1963L7L G10
REFCOMP (V)
600
400
700
600
VDD = 2.7V
INTERNAL REF
1044
BIPOLAR
MODE
0
–5
5
0
–5
–10
2.480
2.475
0
0.5
1
1.5
LOAD CURRENT (mA)
2
–10
–50
–25
75
0
25
50
TEMPERATURE (°C)
1863L7L G13
1.00
0.75
0.75
0.50
0.50
0.25
0.25
DNL (LSB)
INL (LSB)
–25
0
25
50
TEMPERATURE (°C)
75
100
1863L7L G15
Differential Nonlinearity
vs Output Code (LTC1863L)
1.00
0
0
–0.25
–0.25
–0.50
–0.50
–0.75
–0.75
0
–15
–50
1863L7L G14
Integral Nonlinearity
vs Output Code (LTC1863L)
–1.00
100
512 1024 1536 2048 2560 3072 3584 4096
CODE
1863L7L G16
–1.00
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
1863L7L G17
1863L7Lf
6
LTC1863L/LTC1867L
U
U
U
PI FU CTIO S
CHO-CH7/COM (Pins 1-8): Analog Input Pins. Analog
inputs must be free of noise with respect to GND. CH7/
COM can be either a separate channel or the common
minus input for the other channels. Unused channels
should be tied to ground.
REFCOMP (Pin 9): Reference Buffer Output Pin. Bypass to
GND with 10µF tantalum capacitor in parallel with 0.1µF
ceramic capacitor (2.5V Nominal). To overdrive REFCOMP,
tie VREF to GND.
VREF (Pin 10): 1.25V Reference Output. This pin can also
be used as an external reference buffer input for improved
accuracy and drift. Bypass to GND with 2.2µF tantalum
capacitor in parallel with 0.1µF ceramic capacitor.
SCK (Pin 12): Shift Clock. This clock synchronizes the
serial data transfer.
SDO (Pin 13): Digital Data Output. The A/D conversion
result is shifted out of this output. Straight binary format
for unipolar mode and two’s complement format for
bipolar mode.
SDI (Pin 14): Digital Data Input Pin. The A/D configuration
word is shifted into this input.
GND (Pin 15): Analog and Digital GND.
VDD (Pin 16): Analog and Digital Power Supply. Bypass to
GND with 10µF tantalum capacitor in parallel with 0.1µF
ceramic capacitor.
CS/CONV (Pin 11): This input provides the dual function
of initiating conversions on the ADC and also frames the
serial data transfer.
U
UU
ECTIO
UU
TYPICAL CO
DIAGRA
±1.25V
DIFFERENTIAL
INPUTS
2.5V
SINGLE-ENDED
INPUT
+
CH0
VDD
–
CH1
GND
CH2
SDI
LTC1863L/
CH3
SDO
LTC1867L
+
CH4
SCK
CH5
CS/CONV
CH6
VREF
CH7/COM
REFCOMP
2.7V TO 3.6V
10µF
DIGITAL
I/O
1.25V
2.2µF
2.5V
10µF
1863L7L TCD
TEST CIRCUITS
Load Circuits for Access Timing
Load Circuits for Output Float Delay
2.7V
2.7V
3k
3k
SDO
SDO
SDO
3k
CL
(A) Hi-Z TO VOH AND VOL TO VOH
SDO
3k
CL
(B) Hi-Z TO VOL AND VOH TO VOL
1863L7L TC01
(A) VOH TO Hi-Z
CL
CL
(B) VOL TO Hi-Z
1863L7L TC02
1863L7Lf
7
LTC1863L/LTC1867L
W
UW
TI I G DIAGRA S
t1 (For Short Pulse Mode)
t2 (SDO Valid After SCK↓),
t 3 (SDO Valid Hold Time After SCK↓)
t1
t2
50%
50%
CS/CONV
SCK
0.45V
t3
1.9V
0.45V
SDO
t 5 (SDI Setup Time Before SCK↑),
t6 (SDI Hold Time After SCK↑)
t4 (SDO Valid After CS/CONV↓)
t4
CS/CONV
SDO
1.9V
SCK
0.45V
Hi-Z
1.9V
0.45V
SDI
t7 (SLEEP Mode Wake-Up Time)
1.9V
0.45V
1.9V
0.45V
t 8 (BUS Relinquish Time)
t7
SCK
t6
t5
t8
50%
CS/CONV
1.9V
SLEEP BIT (SLP = 0)
READ-IN
CS/CONV
50%
SDO
90%
10%
Hi-Z
1863L7L TD
U
W
U U
APPLICATIO S I FOR ATIO
Overview
The LTC1863L/LTC1867L are complete, low power, multiplexed ADCs. They consist of a 12-/16-bit, 175ksps capacitive successive approximation A/D converter, a precision
internal reference, a configurable 8-channel analog input
multiplexer (MUX) and a serial port for data transfer.
Conversions are started by a rising edge on the CS/CONV
input. Once a conversion cycle has begun, it cannot be
restarted. Between conversions, the ADCs receive an input
word for channel selection and output the conversion
result, and the analog input is acquired in preparation for
the next conversion. In the acquire phase, a minimum time
of 2.01µs will provide enough time for the sample-andhold capacitors to acquire the analog signal.
During the conversion, the internal differential 16-bit
capacitive DAC output is sequenced by the SAR from the
most significant bit (MSB) to the least significant bit
(LSB). The input is sucessively compared with the binary
weighted charges supplied by the differential capacitive
DAC. Bit decisions are made by a low power, differential
comparator that rejects common mode noise. At the end
of a conversion, the DAC output balances the analog input.
The SAR content (a 12-/16-bit data word) that represents
the analog input is loaded into the 12-/16-bit output
latches.
1863L7Lf
8
LTC1863L/LTC1867L
U
W
U U
APPLICATIO S I FOR ATIO
Changing the MUX Assignment “On the Fly”
Analog Input Multiplexer
1st Conversion
The analog input multiplexer is controlled by a 7-bit input
data word. The input data word is defined as follows:
+
–{
+
–{
SD OS S1 S0 COM UNI SLP
SD = SINGLE/DIFFERENTIAL BIT
OS = ODD/SIGN BIT
2nd Conversion
CH2
CH3
–
+
{
CH2
CH3
CH4
CH5
+
+
{
CH4
CH5
CH7/COM
(UNUSED)
CH7/COM (–)
S1 = ADDRESS SELECT BIT 1
1863L7L AI02
S0 = ADDRESS SELECT BIT 0
Tables 1 and 2 show the configurations when COM = 0,
and COM = 1.
COM = CH7/COM CONFIGURATION BIT
Table 1. Channel Configuration (When COM = 0, CH7/COM Pin
Is Used as CH7)
UNI = UNIPOLAR/BIPOLAR BIT
SLP = SLEEP MODE BIT
Examples of Multiplexer Options
4 Differential
+ (–)
– (+) {
+ (–)
– (+) {
+ (–)
– (+) {
+ (–)
– (+) {
CH0
CH1
CH2
CH3
CH4
CH5
+
+
+
+
+
+
+
+
CH6
CH7/COM
7 Single-Ended
to CH7/COM
+
+
+
+
+
+
+
8 Single-Ended
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM (–)
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7/COM
GND (–)
Combinations of Differential
and Single-Ended
+
–{
CH0
CH1
–
+{
+
+
+
+
CH2
CH3
CH4
CH5
CH6
CH7/COM
GND (–)
1863L7L AI01
Channel Configuration
“+”
“–”
SD
OS
S1
S0
COM
0
0
0
0
0
CH0
CH1
0
0
0
1
0
CH2
CH3
0
0
1
0
0
CH4
CH5
0
0
1
1
0
CH6
CH7
0
1
0
0
0
CH1
CH0
0
1
0
1
0
CH3
CH2
0
1
1
0
0
CH5
CH4
0
1
1
1
0
CH7
CH6
1
0
0
0
0
CH0
GND
1
0
0
1
0
CH2
GND
1
0
1
0
0
CH4
GND
1
0
1
1
0
CH6
GND
1
1
0
0
0
CH1
GND
1
1
0
1
0
CH3
GND
1
1
1
0
0
CH5
GND
1
1
1
1
0
CH7
GND
Table 2. Channel Configuration (When COM = 1, CH7/COM Pin
Is Used as COMMON)
Channel Configuration
"+"
"–"
SD
OS
S1
S0
COM
1
0
0
0
1
CH0
CH7/COM
1
0
0
1
1
CH2
CH7/COM
1
0
1
0
1
CH4
CH7/COM
1
0
1
1
1
CH6
CH7/COM
1
1
0
0
1
CH1
CH7/COM
1
1
0
1
1
CH3
CH7/COM
1
1
1
0
1
CH5
CH7/COM
1863L7Lf
9
LTC1863L/LTC1867L
U
W
U U
APPLICATIO S I FOR ATIO
Driving the Analog Inputs
The analog inputs of the LTC1863L/LTC1867L are easy to
drive. Each of the analog inputs can be used as a singleended input relative to the GND pin (CH0-GND, CH1-GND,
etc) or in pairs (CH0 and CH1, CH2 and CH3, CH4 and CH5,
CH6 and CH7) for differential inputs. In addition, CH7 can
act as a COM pin for both single-ended and differential
modes if the COM bit in the input word is high. Regardless
of the MUX configuration, the “+” and “–” inputs are
sampled at the same instant. Any unwanted signal that is
common mode to both inputs will be reduced by the
common mode rejection of the sample-and-hold circuit.
The inputs draw only one small current spike while charging the sample-and-hold capacitors during the acquire
mode. In conversion mode, the analog inputs draw only a
small leakage current. If the source impedance of the
driving circuit is low then the LTC1863L/LTC1867L inputs
can be driven directly. More acquisition time should be
allowed for a higher impedance source.
The following list is a summary of the op amps that are
suitable for driving the LTC1863L/LTC1867L. More detailed information is available in the Linear Technology
data books or Linear Technology website.
LT®1468: 90MHz, 22V/µs 16-bit accurate amplifier
LT1469: Dual LT1468
LT1490A/LT1491A: Dual/quad micropower amplifiers,
50µA/amplifier max, 500µV offset, common mode range
extends 44V above V– independent of V+, 3V, 5V and ±15V
supplies.
LT1568: Very low noise, active RC filter building block,
cutoff frequency up to 10MHz, 2.7V to ±5V supplies.
ANALOG
INPUT
LT1638/LT1639: Dual/quad 1.2MHz, 0.4V/µs amplifiers,
230µA per amplifier, 3V, 5V and ±15V supplies.
LT1881/LT1882: Dual and quad, 200pA bias current, railto-rail output op amps, up to ±15V supplies.
LTC1992-2: Gain of 2 fully differential input/output amplifier/driver, 2.5mV offset, CLOAD stable, 2.7V to ±5V
supplies.
LT1995: 30MHz, 1000V/µs gain selectable amplifier, pin
configurable as a difference amplifier, inverting and
noninverting amplifier, ±2.5V to ±15V supplies.
LTC6912: Dual programmable gain amplifiers with SPI
serial interface, 2mV offset, 2.7V to ±5V supplies.
LTC6915: Zero drift, instrumentation amplifier with SPI
programmable gain, 125dB CMRR, 0.1% gain accuracy,
10µV offset.
Input Filtering
The noise and the distortion of the input amplifier and
other circuitry must be considered since they will add to
the LTC1863L/LTC1867L noise and distortion. Noisy input circuitry should be filtered prior to the analog inputs to
minimize noise. A simple 1-pole RC filter is sufficient for
many applications. For instance, Figure 1 shows a 50Ω
source resistor and a 2000pF capacitor to ground on the
input will limit the input bandwidth to 1.6MHz. The source
impedance has to be kept low to avoid gain error and
degradation in the AC performance. The capacitor also
acts as a charge reservoir for the input sample-and-hold
and isolates the ADC input from sampling glitch sensitive
circuitry. High quality capacitors and resistors should be
1000pF
50Ω
50Ω
CH0
LTC1863L/
LTC1867L
2000pF
GND
DIFFERENTIAL
ANALOG
INPUTS
CH0
LTC1863L/
LTC1867L
1000pF
50Ω
CH1
1000pF
REFCOMP
REFCOMP
10µF
1863L7L F01a
Figure 1a. Optional RC Input Filtering for Single-Ended Input
10µF
1863L7L F01b
Figure 1b. Optional RC Input Filtering for Differential Inputs
1863L7Lf
10
LTC1863L/LTC1867L
U
W
U U
APPLICATIO S I FOR ATIO
DC Performance
One way of measuring the transition noise associated with
a high resolution ADC is to use a technique where a DC
signal is applied to the input of the ADC and the resulting
output codes are collected over a large number of conversions. For example, in Figure 2 the distribution of output
codes is shown for a DC input that had been digitized 4096
times. The distribution is Gaussian and the RMS code
transition noise is about 1.6LSB.
components at the A/D output. The output is band limited
to frequencies from above DC and below half the sampling
frequency. Figure 3a shows a typical SINAD of 81.4dB with
a 175kHz sampling rate and a 1kHz input. Higher SINAD can
be obtained with a 3V supply. For example, when an external 3V is applied to REFCOMP (tie VREF to GND), a SINAD
of 83.5dB can be achieved as shown in Figure 3b.
0
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 82.9dB
SINAD = 81.4dB
THD = 86.8dB
–20
–40
AMPLITUDE (dB)
used since these components can add distortion. NPO and
silver mica type dielectric capacitors have excellent linearity. Carbon surface mount resistors can also generate
distortion from self heating and from damage that may
occur during soldering. Metal film surface mount resistors are much less susceptible to both problems.
–60
–80
–100
–120
1200
VDD = 2.7V
INTERNAL REF
1044
–140
0
1000
895
21.875
43.75
65.625
FREQUENCY (kHz)
830
1863L7L G03
COUNTS
800
Figure 3a. LTC1867L Nonaveraged 4096 Point
FFT Plot with 2.7V Supply
600
465
400
333
0
261
170
0
7
58
fSAMPLE = 175ksps
fIN = 1kHz
SNR = 84.7dB
SINAD = 83.5dB
THD = 90dB
REFCOMP = EXT 3V
–20
23 9
1
20 21 22 23 24 25 26 27 28 29 30 31
CODE
1863L7L G12
Figure 2. LTC1867L Histogram for 4096 Conversions
AMPLITUDE (dB)
200
87.5
–40
–60
–80
–100
Dynamic Performance
FFT (Fast Fourier Transform) test techniques are used to
test the ADC’s frequency response, distortion and noise at
the rated throughput. By applying a low distortion sine
wave and analyzing the digital output using an FFT algorithm, the ADC’s spectral content can be examined for
frequencies outside the fundamental.
–120
–140
0
21.875
43.75
65.625
FREQUENCY (kHz)
87.5
1863L7L F03b
Figure 3b. LTC1867L Nonaveraged 4096 Point
FFT Plot with 3V Supply
Signal-to-Noise Ratio
Total Harmonic Distortion
The Signal-to-Noise and Distortion Ratio (SINAD) is the
ratio between the RMS amplitude of the fundamental input
frequency to the RMS amplitude of all other frequency
Total Harmonic Distortion (THD) is the ratio of the RMS
sum of all harmonics of the input signal to the fundamental
itself. The out-of-band harmonics alias into the frequency
1863L7Lf
11
LTC1863L/LTC1867L
U
W
U U
APPLICATIO S I FOR ATIO
band between DC and half the sampling frequency. THD is
expressed as:
THD = 20 log
V22 + V32 + V42 ... + VN2
V1
Digital Interface
where V1 is the RMS amplitude of the fundamental frequency and V2 through VN are the amplitudes of the
second through Nth harmonics.
Internal Reference
The LTC1863L and LTC1867L have an on-chip, temperature compensated, curvature corrected, bandgap reference that is factory trimmed to 1.25V. It is internally
connected to a reference amplifier and is available at VREF
(Pin 10). A 3k resistor is in series with the output so that
it can be easily overdriven by an external reference if
better drift and/or accuracy are required as shown in
Figure 4. The reference amplifier gains the VREF voltage by
2x to 2.5V at REFCOMP (Pin 9). This reference amplifier
1.25V
R1
3k
10 VREF
BANDGAP
REFERENCE
2.2µF
2.5V
9 REFCOMP
REFERENCE
AMP
10µF
R2
R3
15 GND
compensation pin, REFCOMP, must be bypassed with a
10µF ceramic or tantalum in parallel with a 0.1µF ceramic
for best noise performance.
LTC1863L/LTC1867L
The LTC1863L and LTC1867L have a very simple digital
interface that is enabled by the control input, CS/CONV. A
logic rising edge applied to the CS/CONV input will initiate
a conversion. After the conversion, taking CS/CONV low
will enable the serial port and the ADC will present digital
data in two’s complement format in bipolar mode or
straight binary format in unipolar mode, through the SCK/
SDO serial port.
Internal Clock
The internal clock is factory trimmed to achieve a typical
conversion time of 3.2µs and a maximum conversion
time, 3.7µs, over the full operating temperature range. The
typical acquisition time is 1.68µs, and a throughput sampling rate of 175ksps is tested and guaranteed.
Automatic Nap Mode
The LTC1863L and LTC1867L go into automatic nap mode
when CS/CONV is held high after the conversion is complete. With a typical operating current of 750µA and automatic 170µA nap mode between conversions, the power
dissipation drops with reduced sample rate. The ADC only
keeps the VREF and REFCOMP voltages active when the part
is in the automatic nap mode. The slower the sample rate
allows the power dissipation to be lower (see Figure 5).
1863L7L F04a
800
Figure 4a. LT1867L Reference Circuit
VIN
LT1790A-1.25
VOUT
10
2.2µF
9
+
10µF
0.1µF
15
VREF
LTC1863L/
LTC1867L
SUPPLY CURRENT (µA)
3V
VDD = 2.7V
700
600
500
400
300
200
REFCOMP
100
1
GND
1863L7L F04b
Figure 4b. Using the LT1790A-1.25 as an External Reference
10
100
fSAMPLE (ksps)
1000
1863L7L G09
Figure 5. Supply Current vs fSAMPLE
1863L7Lf
12
LTC1863L/LTC1867L
U
W
U U
APPLICATIO S I FOR ATIO
If the CS/CONV returns low during a bit decision, it can
create a small error. For best performance ensure that the
CS/CONV returns low either within 100ns after the conversion starts (i.e. before the first bit decision) or after the
conversion ends. If CS/CONV is low when the conversion
ends, the MSB bit will appear on SDO at the end of the
conversion and the ADC will remain powered up.
the common return for these bypass capacitors is essential to the low noise operation of the ADC. The width for
these tracks should be as wide as possible.
Timing and Control
Conversion start is controlled by the CS/CONV digital
input. The rising edge transition of the CS/CONV will start
a conversion. Once initiated, it cannot be restarted until the
conversion is complete. Figures 6 and 7 show the timing
diagrams for two types of CS/CONV pulses.
Sleep Mode
If the SLP = 1 is selected in the input word, the ADC will
enter SLEEP mode and draw only leakage current (provided that all the digital inputs stay at GND or VDD). After
release from the SLEEP mode, the ADC needs 80ms to
wake up (charge the 2.2µF/10µF bypass capacitors on
VREF/REFCOMP pins).
Example 1 (Figure 6) shows the LTC1863L/LTC1867L
operating in automatic nap mode with CS/CONV signal
staying HIGH after the conversion. Automatic nap mode
provides power reduction at reduced sample rate.
The ADCs can also operate with the CS/CONV signal
returning LOW before the conversion ends. In this mode
(Example 2, Figure 7), the ADCs remain powered up. The
digital output, SDO, will go HIGH immediately after the
conversion is complete if the analog inputs are above half
scale in unipolar mode or below half scale in bipolar mode.
This is a way to measure the conversion time of the A/D
converter.
Board Layout and Bypassing
To obtain the best performance, a printed circuit board
with a ground plane is required. Layout for the printed
circuit board should ensure digital and analog signal lines
are separated as much as possible. In particular, care
should be taken not to run any digital signal alongside an
analog signal.
Figures 8 and 9 are the transfer characteristics for the
bipolar and unipolar mode.
All analog inputs should be screened by GND. VREF,
REFCOMP and VDD should be bypassed to this ground
plane as close to the pin as possible; the low impedance of
1/fSCK
CS/CONV
tCONV
NAP MODE
NOT NEEDED FOR LTC1863L
SCK
SDI
SDO
(LTC1863L)
DON'T CARE
Hi-Z
Hi-Z
SDO
(LTC1867L)
1
2
3
4
SD
0S
S1
S0
D9
D8
MSB
D11 D10
5
6
7
COM UNI
SLP
D7
8
9
10
11
12
13
14
15
16
DON'T CARE
D6
D5
D4
D3
D2
D1
D0
MSB
D15 D14 D13 D12 D11 D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
1867 F06
Figure 6. Example 1, CS/CONV Starts a Conversion and Remains HIGH Until Next Data Transfer. With CS/CONV
Remaining HIGH after the Conversion, Automatic Nap Modes Provides Power Reduction at Reduced Sample Rate
1863L7Lf
13
LTC1863L/LTC1867L
U
U
W
U
APPLICATIO S I FOR ATIO
tACQ
CS/CONV
NOT NEEDED FOR LTC1863L
SCK
SDI
DON'T CARE
1
2
3
4
5
6
7
COM UNI
SLP
8
9
10
11
12
SD
0S
S1
S0
MSB = D11
D10
D9
D8
D6
D5
D4
D3
D2
D1
D0
MSB = D15
D14 D13 D12 D11 D10
D9
D8
D7
D6
D5
D4
13
14
15
16
DON'T CARE
t CONV
SDO
(LTC1863L)
Hi-Z
SDO
(LTC1867L)
D7
t CONV
D3
D2
D1
D0
Hi-Z
1863L7L F07
111...111
011...111
111...110
BIPOLAR
ZERO
011...110
OUTPUT CODE
OUTPUT CODE (TWO’S COMPLEMENT)
Figure 7. Example 2, CS/CONV Starts a Conversion with Short Active HIGH Pulse.
With CS/CONV Returning LOW Before the Conversion, the ADC Remains Powered Up.
000...001
000...000
111...111
111...110
FS = 2.5V
1LSB = FS/2n
1LSB (LTC1863L) = 610µV
1LSB (LTC1867L) = 38.1µV
100...001
100...000
–FS/2
–1 0V 1
LSB
LSB
INPUT VOLTAGE (V)
FS/2 – 1LSB
100...001
100...000
011...111 UNIPOLAR
ZERO
011...110
FS = 2.5V
1LSB = FS/2n
1LSB (LTC1863L) = 610µV
1LSB (LTC1867L) = 38.1µV
000...001
000...000
0V
FS – 1LSB
INPUT VOLTAGE (V)
1863L7L F08
Figure 8. LTC1863L/LTC1867L Bipolar Transfer
Characteristics (Two’s Complement)
1863L7L F09
Figure 9. LTC1863L/LTC1867L Unipolar Transfer
Characteristics (Straight Binary)
1863L7Lf
14
LTC1863L/LTC1867L
U
PACKAGE DESCRIPTIO
GN Package
16-Lead Plastic SSOP (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1641)
.189 – .196*
(4.801 – 4.978)
.045 ±.005
16 15 14 13 12 11 10 9
.254 MIN
.009
(0.229)
REF
.150 – .165
.229 – .244
(5.817 – 6.198)
.0165 ± .0015
.150 – .157**
(3.810 – 3.988)
.0250 BSC
RECOMMENDED SOLDER PAD LAYOUT
1
.015 ± .004
× 45°
(0.38 ± 0.10)
.007 – .0098
(0.178 – 0.249)
2 3
4
5 6
7
.0532 – .0688
(1.35 – 1.75)
8
.004 – .0098
(0.102 – 0.249)
0° – 8° TYP
.016 – .050
(0.406 – 1.270)
NOTE:
1. CONTROLLING DIMENSION: INCHES
INCHES
2. DIMENSIONS ARE IN
(MILLIMETERS)
.008 – .012
(0.203 – 0.305)
TYP
.0250
(0.635)
BSC
GN16 (SSOP) 0204
3. DRAWING NOT TO SCALE
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
1863L7Lf
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
15
LTC1863L/LTC1867L
RELATED PARTS
PART NUMBER
DESCRIPTION
COMMENTS
LTC1417
14-Bit, 400ksps Serial ADC
20mW, Unipolar or Bipolar, Internal Reference, SSOP-16 Package
LT1468/LT1469
Single/Dual 90MHz, 22V/µs, 16-Bit Accurate Op Amps
Low Input Offset: 75µV/125µV
LTC1609
16-Bit, 200ksps Serial ADC
65mW, Configurable Bipolar and Unipolar Input Ranges, 5V Supply
LT1790
Micropower Low Dropout Reference
60µA Supply Current, 10ppm/°C, SOT-23 Package
LT1790A-1.25
Micropower Precision Series Reference
Bandgap, 60µA Max Supply Current, 10ppm/°C, SOT-23 Package
LTC1850/LTC1851
10-Bit/12-Bit, 8-Channel, 1.25Msps ADC
Parallel Output, Programmable MUX and Sequencer, 5V Supply
LTC1852/LTC1853
10-Bit/12-Bit, 8-Channel, 400ksps ADC
Parallel Output, Programmable MUX and Sequencer, 3V or 5V Supply
LTC1860/LTC1861
12-Bit, 1-/2-Channel 250ksps ADC in MSOP
850µA at 250ksps, 2µA at 1ksps, SO-8 and MSOP Packages
LTC1860L/LTC1861L
3V, 12-Bit, 1-/2-Channel 150ksps ADC
450µA at 150ksps, 10µA at 1ksps, SO-8 and MSOP Packages
LTC1863/LTC1867
12-/16-Bit, 8-Channel 200ksps ADC
5V Supply, Pin Compatible with LTC1863L/LTC1867L
LTC1864/LTC1865
16-Bit, 1-/2-Channel 250ksps ADC in MSOP
850µA at 250ksps, 2µA at 1ksps, SO-8 and MSOP Packages
LTC1864L/LTC1865L
3V, 16-Bit, 1-/2-Channel 150ksps ADC in MSOP
450µA at 150ksps, 10µA at 1ksps, SO-8 and MSOP Packages
1863L7Lf
16
Linear Technology Corporation
LT/TP 0105 1K • PRINTED IN USA
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900 ● FAX: (408) 434-0507
●
www.linear.com
© LINEAR TECHNOLOGY CORPORATION 2005