OKI MSC2383657D

This version:
Mar. 8. 1999
Semiconductor
MSC2383657D-xxBS20/DS20
8,388,608-word x 36-bit DYNAMIC RAM MODULE : FAST PAGE MODE TYPE WITH EDO
DESCRIPTION
The MSC2383657D-xxBS20/DS20 is a fully decoded, 8,388,608-word x 36-bit CMOS dynamic random access
memory module composed of sixteen 16Mb DRAMs (4Mx4) in SOJ packages and four 8Mb DRAMs (4Mx2) in SOJ
packages mounted with twenty decoupling capacitors on a 72-pin glass epoxy single in-line package. This module
supports any application where high density and large capacity of storage memory are required.
FEATURES
· 8,388,608-word x 36-bit organization
· 72-pin Single In-Line Memory Module
MSC2383657D-xxBS20 : Gold tab
MSC2383657D-xxDS20 : Solder tab
· Single +5V supply ± 10% tolerance
· Input
: TTL compatible
· Output
: TTL compatible, 3-state
· Refresh : 2048cycles/32ms
· /CAS before /RAS refresh, hidden refresh, /RAS only refresh capability
· Fast page mode with EDO capability
· Multi-bit test mode capability
PRODUCT FAMILY
tRAC
tAA
tCAC
Cycle
Time
(Min.)
MSC2383657D-60BS20/DS20
60ns
30ns
15ns
110ns
5995mW
MSC2383657D-70BS20/DS20
70ns
35ns
20ns
130ns
5500mW
Access Time (Max.)
Family
Power Dissipation
Operating (Max.)
Standby (Max.)
110mW
Semiconductor
MSC2383657D
MODULE OUTLINE
(Unit : mm)
MSC2383657D-xxBS20/DS20
9.3Max.
107.95±0.2*1
101.19Typ.
3.38Typ.
φ3.18
25.4±0.2
Typ. Typ.
10.16 6.35
2.03Typ.
6.35Typ.
1
72
1.27±0.1
R1.57
6.35
1.04Typ.
95.25
*1 The common size difference of the board width 12.5mm of its height is specified as ±0.2.
The value above 12.5mm is specified as ±0.5.
3.17Min.
+0.1
1.27 -0.08
5.71Min.
Semiconductor
MSC2383657D
PIN CONFIGURATION
Pin No.
Pin Name
Pin No.
Pin Name
Pin No.
Pin Name
Pin No.
Pin Name
1
VSS
19
A10
37
DQ17
55
DQ12
2
DQ0
20
DQ4
38
DQ35
56
DQ30
3
DQ18
21
DQ22
39
VSS
57
DQ13
4
DQ1
22
DQ5
40
/CAS0
58
DQ31
5
DQ19
23
DQ23
41
/CAS2
59
VCC
6
DQ2
24
DQ6
42
/CAS3
60
DQ32
7
DQ20
25
DQ24
43
/CAS1
61
DQ14
8
DQ3
26
DQ7
44
/RAS0
62
DQ33
9
DQ21
27
DQ25
45
/RAS1
63
DQ15
10
VCC
28
A7
46
NC
64
DQ34
11
NC
29
NC
47
/WE
65
DQ16
12
A0
30
VCC
48
NC
66
NC
13
A1
31
A8
49
DQ9
67
PD1
14
A2
32
A9
50
DQ27
68
PD2
15
A3
33
/RAS3
51
DQ10
69
PD3
16
A4
34
/RAS2
52
DQ28
70
PD4
17
A5
35
DQ26
53
DQ11
71
NC
18
A6
36
DQ8
54
DQ29
72
VSS
Presence Detect Pins
Pin No.
Pin Name
MSC2383657D
-60BS20/DS20
MSC2383657D
-70BS20/DS20
67
PD1
NC
NC
68
PD2
VSS
VSS
69
PD3
NC
VSS
70
PD4
NC
NC
Semiconductor
MSC2383657D
BLOCK DIAGRAM
A0-A10
/RAS0
/CAS0
/WE
/RAS2
/CAS2
A0-A10
/RAS
/CAS
/WE
DQ
DQ
DQ
DQ
/OE
VSS
DQ0
DQ1
DQ2
DQ3
DQ
DQ
DQ
DQ
/OE
VSS
DQ4
DQ5
DQ6
DQ7
A0-A10 DQ1
/RAS
DQ2
/CAS1
/CAS2
/WE
/OE
VCC
VSS
A0-A10
/RAS
/CAS
/WE
VCC
A0-A10
/RAS
/CAS
/WE
VCC
VCC
A0-A10
/RAS
/CAS
/WE
VCC
/RAS1
/CAS1
A0-A10
/RAS
/CAS
/WE
DQ
DQ
DQ
DQ
/OE
VSS
DQ18
DQ19
DQ20
DQ21
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
A0-A10
/RAS
/CAS
/WE
DQ
DQ
DQ
DQ
/OE
VSS
DQ22
DQ23
DQ24
DQ25
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
DQ8
DQ17
DQ1 A0-A10
DQ2
/RAS
/CAS1
/CAS2
/OE
/WE
VSS
VCC
A0-A10 DQ1
/RAS
DQ2
/CAS1
/CAS2
/WE
/OE
VCC
VSS
DQ26
DQ35
DQ1 A0-A10
DQ2
/RAS
/CAS1
/CAS2
/OE
/WE
VSS
VCC
DQ
DQ
DQ
DQ
/OE
VSS
DQ9
DQ10
DQ11
DQ12
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
A0-A10
/RAS
/CAS
/WE
DQ
DQ
DQ
DQ
/OE
VSS
DQ27
DQ28
DQ29
DQ30
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
DQ
DQ
DQ
DQ
/OE
VSS
DQ13
DQ14
DQ15
DQ16
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
A0-A10
/RAS
/CAS
/WE
DQ
DQ
DQ
DQ
/OE
VSS
DQ31
DQ32
DQ33
DQ34
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
VCC
VCC
VCC
VCC
/RAS3
/CAS3
VCC
VSS
DQ A0-A10
DQ
/RAS
DQ
/CAS
DQ
/WE
/OE
VSS
VCC
C1-C20
Semiconductor
MSC2383657D
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
VIN, VOUT
-0.5 to +7.0
V
Voltage on VCC Supply Relative to VSS
VCC
-0.5 to +7.0
V
Short Circuit Output Current
IOS
50
mA
Power Dissipation
PD *
20
W
Operating Temperature
TOPR
0 to +70
°C
Storage Temperature
TSTG
-40 to +125
°C
Voltage on Any Pin Relative to VSS
* Ta = 25°C
Recommended Operating Conditions
( Ta = 0°C to +70°C )
Parameter
Symbol
Min.
Typ.
Max.
Unit
VCC
4.5
5.0
5.5
V
VSS
0
0
0
V
Input High Voltage
VIH
2.4
-
VCC + 0.5
V
Input Low Voltage
VIL
-0.5
-
0.8
V
Power Supply Voltage
Capacitance
( VCC = 5V ± 10%, Ta = 25°C, f = 1 MHz )
Parameter
Symbol
Typ.
Max.
Unit
Input Capacitance (A0 - A10)
CIN1
-
135
pF
Input Capacitance (/WE)
CIN2
-
155
pF
Input Capacitance (/RAS0- /RAS3)
CIN3
-
43
pF
Input Capacitance (/CAS0- /CAS3)
CIN4
-
50
pF
I/O Capacitance (DQ0 - DQ35)
CDQ
-
26
pF
Semiconductor
MSC2383657D
DC CHARACTERISTICS
(VCC = 5V ± 10%, Ta = 0°C to +70°C )
Parameter
Symbol
Condition
MSC2383657D
-60BS20/DS20
MSC2383657D
-70BS20/DS20
Min.
Max.
Min.
Max.
Unit
Note
Input Leakage Current
ILI
0V ≤ VIN ≤ 6.5V;
All other pins not
under test = 0V
-200
200
-200
200
µA
Output Leakage Current
ILO
DQ disable
0V ≤ VOUT ≤ 5.5V
-20
20
-20
20
µA
Output High Voltage
VOH
IOH = -5.0mA
2.4
VCC
2.4
VCC
V
Output Low Voltage
VOL
IOL = 4.2mA
0
0.4
0
0.4
V
Average Power
Supply Current
(Operating)
ICC1
/RAS, /CAS cycling,
tRC = Min.
-
1090
-
1000
mA
1, 2
/RAS, /CAS = VIH
-
40
-
40
mA
1
/RAS, /CAS
≥ VCC -0.2V
-
20
-
20
mA
1
Power supply current
(Standby)
ICC2
Average Power
Supply Current
(/RAS only refresh)
ICC3
/RAS cycling,
/CAS = VIH,
tRC = Min.
-
1090
-
1000
mA
1, 2
Average Power
Supply Current
(/CAS before /RAS refresh)
ICC6
/RAS cycling,
/CAS before /RAS
-
1090
-
1000
mA
1, 2
Average Power
Supply Current
(Fast Page Mode)
ICC7
/RAS = VIL,
/CAS cycling,
tHPC = Min.
-
970
-
880
mA
1, 3
Notes: 1. ICC Max. is specified as ICC for output open condition.
2. Address can be changed once or less while /RAS = VIL.
3. Address can be changed once or less while /CAS = VIH.
Semiconductor
MSC2383657D
AC CHARACTERISTICS (1/2)
(VCC = 5V ± 10%, Ta = 0°C to +70°C ) Note: 1, 2, 3, 10, 11
Parameter
Symbol
MSC2383657D
-60BS20/DS20
MSC2383657D
-70BS20/DS20
Min.
Max.
Min.
Max.
Unit
Note
Random Read or Write Cycle Time
tRC
110
-
130
-
ns
Fast Page Mode Cycle Time
tHPC
25
-
30
-
ns
Access Time from /RAS
tRAC
-
60
-
70
ns
4, 5, 6
Access Time from /CAS
tCAC
-
15
-
20
ns
4, 5
Access Time from Column Address
tAA
-
30
-
35
ns
4, 6
Access Time from /CAS Precharge
t CPA
-
35
-
40
ns
4
Output Low Impedance Time from /CAS
tCLZ
0
-
0
-
ns
4
Data Output Hold After /CAS Low
tDOH
5
-
5
-
ns
/CAS to Data Output Buffer Turn-off Delay Time
tCEZ
0
15
0
15
ns
7, 8
/RAS to Data Output Buffer Turn-off Delay Time
tREZ
0
15
0
15
ns
7, 8
/WE to Data Output Buffer Turn-off Delay Time
tWEZ
0
15
0
15
ns
7
Transition Time
tT
2
50
2
50
ns
3
Refresh Period
tREF
-
32
-
32
ms
/RAS Precharge Time
tRP
40
-
50
-
ns
/RAS Pulse Width
tRAS
60
10K
70
10K
ns
/RAS Pulse Width (Fast Page Mode with EDO)
tRASP
60
100K
70
100K
ns
/RAS Hold Time
tRSH
15
-
20
-
ns
/CAS Precharge Time (Fast Page Mode with EDO)
tCP
10
-
10
-
ns
/CAS Pulse Width
tCAS
10
10K
13
10K
ns
/CAS Hold Time
tCSH
40
-
45
-
ns
/CAS to /RAS Precharge Time
tCRP
10
-
10
-
ns
/RAS Hold Time from /CAS Precharge
tRHCP
35
-
40
-
ns
/RAS to /CAS Delay Time
tRCD
20
45
20
50
ns
5
/RAS to Column Address Delay Time
tRAD
15
30
15
35
ns
6
Row Address Set-up Time
tASR
0
-
0
-
ns
Row Address Hold Time
tRAH
10
-
13
-
ns
Column Address Set-up Time
tASC
0
-
0
-
ns
Column Address Hold Time
tCAH
10
-
15
-
ns
Column Address to /RAS Lead Time
tRAL
30
-
35
-
ns
Read Command Set-up Time
tRCS
0
-
0
-
ns
Read Command Hold Time
tRCH
0
-
0
-
ns
9
Read Command Hold Time referenced to /RAS
tRRH
0
-
0
-
ns
9
Semiconductor
MSC2383657D
AC Characteristics (2/2)
(VCC = 5V ± 10%, Ta = 0°C to +70°C ) Note: 1, 2, 3, 10, 11
Parameter
Symbol
MSC2383657D
-60BS20/DS20
MSC2383657D
-70BS20/DS20
Min.
Max.
Min.
Max.
Unit
Write Command Set-up Time
tWCS
0
-
0
-
ns
Write Command Hold Time
tWCH
10
-
15
-
ns
Write Command Pulse Width
tWP
10
-
10
-
ns
/WE Pulse Width (DQ Disable)
tWPE
10
-
10
-
ns
Write Command to /RAS Lead Time
tRWL
15
-
20
-
ns
Write Command to /CAS Lead Time
tCWL
15
-
20
-
ns
Data-in Set-up Time
tDS
0
-
0
-
ns
Data-in Hold Time
tDH
15
-
15
-
ns
/CAS Active Delay Time from /RAS Precharge
tRPC
10
-
10
-
ns
/RAS to /CAS Set-up Time
(/CAS before /RAS)
tCSR
10
-
10
-
ns
/RAS to /CAS Hold Time
(/CAS before /RAS)
tCHR
20
-
20
-
ns
/WE to /RAS Precharge Time
(/CAS before /RAS)
tWRP
10
-
10
-
ns
/WE Hold Time from /RAS
(/CAS before /RAS)
tWRH
10
-
10
-
ns
/RAS to /WE Set-up Time
(Test Mode)
tWTS
10
-
10
-
ns
/RAS to /WE Hold Time
(Test Mode)
tWTH
20
-
20
-
ns
Note
Semiconductor
MSC2383657D
Notes: 1. A start-up delay of 200µs is required after power-up, followed by a minimum of eight initialization cycles
(/RAS only refresh or /CAS before /RAS refresh) before proper device operation is achieved.
2. The AC characteristics assumes tT = 5ns.
3. VIH(Min.) and VIL(Max.) are reference levels for measuring input timing signals. Transition time (tT) are
measured between VIH and VIL.
4. This parameter is measured with a load circuit equivalent to 2TTL loads and 100pF.
5. Operation within the tRCD(Max.) limit ensures that tRAC(Max.) can be met.
tRCD(Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD(Max.) limit, then
the access time is controlled by tCAC.
6. Operation within the tRAD(Max.) limit ensures that tRAC(Max.) can be met.
tRAD(Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD(Max.) limit, then
the access time is controlled by tAA.
7. tCEZ(Max.), tREZ(Max.) and tWEZ(Max.) define the time at which the output achieves the open circuit
condition and are not referenced to output voltage levels.
8. tCEZ and tREZ must be satisfied for open circuit condition.
9. tRCH or tRRH must be satisfied for a read cycle.
10. The test mode is initiated by performing a /WE and /CAS before /RAS refresh cycle. This mode is
latched and remains in effect until the exit cycle is generated. The test mode specified in this data sheet
is an 8-bit parallel test function. CA0, CA1 and CA10 are not used. In a read cycle, if all internal bits are
equal, the DQ pin will indicate a high level. If any internal bits are not equal, the DQ pin will indicate a low
level. The test mode is cleared and the memory device returned to its normal operating state by a /RAS
only refresh or /CAS before /RAS refresh cycle.
11. In a test mode read cycle, the value of access time parameters is delayed for 5ns for the specified value.
These parameters should be specified in test mode cycle by adding the above value to the specified
value in this data sheet.