LED-CONVERTER UNIT PS-LD0605-02(S) (7 W) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED-Converter is developed for max. 6 LED-lines APPLICABLE: 1~6 LED lines (Serial Mode) Pout max. 1,1 Watt per line, total max. 7 Watt LED Voltage max. 38V Lamp Current max. 60 mAdc per line FEATURES : Connector style Internal Open LED Detection for every Line Voltage or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF RoHS compliant (S) High output voltage TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH Pin-terminal style -20°C ~ +70°C -20°C ~ +85°C 95 %RH max 64 x 32 x 9.5 mm Weight :9 (g) typ. Pin terminal length may differ Components No. 1 2 Part Description PCB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 Note t=1.0mm Molex 3 Connector CN3 1 53261-0790 JST Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.1, 11th December 2009 LED-CONVERTER UNIT PS-LD0605-02(S) (7 W) (PRELIMINARY INFORMATION) Input side CN1 Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 Output side CN3 / CN4 Symbols Ratings Vin 10.8 ~ 13.2 Vdc Vin 10.8 ~ 13.2 Vdc Vrmt 0 ~ 0.8 = OFF / 2.5 ~ 5 = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightness) GND GND GND CN 1-8 Pin No. CN3 / 4-1 CN3 / 4-2 CN3 / 4-3 CN3 / 4-4 CN3 / 4-5 CN3 / 4-6 Symbols RTN6 (-) RTN5 (-) RTN4 (-) RTN3 (-) RTN2 (-) RTN1 (-) Ratings LED LINE 6 RETURN LED LINE 5 RETURN LED LINE 4 RETURN LED LINE 3 RETURN LED LINE 2 RETURN LED LINE 1 RETURN CN3 / 4-7 Vhigh (+) max 38Vdc (max.38mAdc) - Output Current Select Control Jumper JP 1 Break JP 2 JP 3 JP 4 Output Current JP 5 Break Break Break Example: +2 mA 30mA (Output Current Min.) + 2mA (JP1) = 32mA +4 mA 30mA (Output Current Min.) + 8mA (JP4) = 38mA +6 mA JP1 ~ JP5 OPEN = 60mA +8 mA Break +10 mA For more information, please visit our web-site. ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Open Load Shutdown PWM Frequency Output Power Output Power Output Power Output Power Iout Imin Iin Vbias f(PWM) Pout Pout Pout Pout Specification Vin (V) Vbr (V) Tu (°C) Min. Typ. Max. 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 0 5 0 0 0 0 0 0 0 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+50 -20~+70 28 0.06 150 TBD TBD TBD TBD 30 10 38 3 1.9 0.9 0.6 32 0.3 300 TBD TBD TBD TBD Unit Note mAdc % Adc Vdc Hz Watt Watt Watt Watt Duty 100%, max current duty cycle Tu: -20~+50degC Tu: -20~+70degC For one line For one line Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.1, 11th December 2009 LED-CONVERTER UNIT PS-LD0605-02(S) (7 W) (PRELIMINARY INFORMATION) Vin 10.8 ~ 13.2 Vdc TEST CIRCUIT : Iin A CN1-1 V CN1-2 Vrmt 1. 5 / 2. 5 Vdc Connect Vbr to Ground while using ext. PWM dimming. CN2-7 D1 D1 D2 D2 D6 D6 a V Ext. PWM 0. 0 ~ Vin b SW1 CN1-3 CN1-4 SW2 c Vbr 0. 0 ~ 5. 0 Vdc CN1-5 SW3 CN2-1 A ~ CN2-6 A ~ CN1-6 CN1-7 CN1-8 Note 1 : Note 2 : Note 3 : Do not use analog dimming function and external PWM for dimming at the same time. Pin terminal style converters have Molex connectors mounted. Above output current is the default value. Correct output current is to be selected by user and under his sole responsibility. Exceeding currents will damage the LED backlight. External PWM-signal is LOW active. Do not use output 1 in case you connect only 5 (or less) outputs. Examples: Use 4 outputs only 1 then connect Pin 2+3+4+5. In case customer do not connect all output, please ask factory. Note 4 : Note 5: Note 6 : ORDER KEY : PS-LD0605-02-x-yyy With order of this converter please give the following key: -x to be replaced by: -1 for connectors -2 for Pin-Terminal in case of quantity orders (300+ pcs), a pre-configuration can be ordered: -yyy to be replaced by: three digit value for required output current per LED line (from 010 to 030 including) Attention: * if no value is mentioned, 10 mA output current per LED line will be set as default * a selection of incorrect LED current may decrease lifetime or destroy the backlight * orders for pre-configured converters can’t be cancelled Examples: PS-LD0605-02-1-034 (S) 34 mA output current PCB with connectors PS-LD0605-02-2-58 (S) 58 mA output current PCB with Pin-Terminal CABLES : for input: 500 mm, stripped and tinned ends, order key <input cable #13> for output: 500 mm, stripped and tinned ends, order key <input cable #4> Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.1, 11th December 2009