CEL PS2865-1-F4-A

PHOTOCOUPLER
PS2865-1
HIGH ISOLATION VOLTAGE
AC INPUT RESPONSE TYPE
4-PIN SOP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS2865-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon
phototransistor.
The PS2865-1 meets insulation thickness 0.4 mm and BSI′s insulation supplementary approved.
The package has shield effect to cut off ambient light, and is mounted in a plastic SOP (Small Outline Package) for
high density applications.
FEATURES
• Isolation distance (0.4 mm MIN.)
• AC input response
• High isolation voltage (BV = 2 500 Vr.m.s.)
• SOP (Small Outline Package) type
• High-speed switching (tr = 4 µs TYP., tf = 5 µs TYP.)
• Ordering number of tape product: PS2865-1-F3, F4
• Safety standards: PS2865-1
• UL approved: File No. E72422 (S)
• BSI approved: No. 8514, 8515
APPLICATIONS
• Modem
• Programmable logic controllers
• Power supply
Document No. PN10259EJ01V0DS (1st edition)
(Previous No. P15094EJ2V0DS00)
Date Published February 2003 CP(K)
The mark  shows major revised points.
PS2865-1
PACKAGE DIMENSIONS (UNIT: mm)
TOP VIEW
2.7±0.3
4
3
1. Anode, Cathode
2. Cathode, Anode
3. Emitter
4. Collector
1
2
7.0±0.3
0.15+0.10
–0.05
2.0±0.1
0.1±0.1
4.4
0.5±0.3
1.27
0.4±0.1
0.12 M
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
4.5 mm
Creepage Distance
4.5 mm
Isolation Distance
0.4 mm
MARKING
PS2865-1
N65
003
Assembly Lot
Last number of type: 65
"N" of NEC
0 03
Week Assembled
Year Assembled
(Last 1 Digit)
2
Data Sheet PN10259EJ01V0DS
PS2865-1
ORDERING INFORMATION (Solder Contains Lead)
Part Number
PS2865-1
Package
4-pin SOP
Application Part Number
Packing Style
50 pcs (Tape 50 pcs cut)
PS2865-1-F3
*1
PS2865-1
Embossed Tape 3 500 pcs/reel
PS2865-1-F4
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number
PS2865-1-A
Package
4-pin SOP
Application Part Number
Packing Style
50 pcs (Tape 50 pcs cut)
PS2865-1-F3-A
*1
PS2865-1
Embossed Tape 3 500 pcs/reel
PS2865-1-F4-A
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
IF
± 50
mA
PD
60
mW
IFP
± 1.0
A
Collector to Emitter Voltage
VCEO
40
V
Emitter to Collector Voltage
VECO
5
V
IC
40
mA
∆PC/°C
1.2
mW/°C
PC
120
mW
BV
2 500
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +100
°C
Storage Temperature
Tstg
–55 to +150
°C
Diode
Forward Current (DC)
Power Dissipation
Peak Forward Current
Transistor
*1
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
*2
*1 PW = 100 µs, Duty Cycle = 1 %
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
Data Sheet PN10259EJ01V0DS
3
PS2865-1
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Diode
Transistor
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
1.4
V
Forward Voltage
VF
IF = ± 5 mA
1.1
Terminal Capacitance
Ct
V = 0 V, f = 1 MHz
30
Collector to Emitter Dark
ICEO
IF = 0 mA, VCE = 40 V
CTR
IF = ± 5 mA, VCE = 5 V
VCE (sat)
IF = ± 10 mA, IC = 2 mA
pF
100
nA
400
%
0.3
V
Current
Coupled
Current Transfer Ratio
(IC/IF)
50
200
*1
Collector Saturation
Voltage
Isolation Resistance
RI-O
VI-O = 1 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
*2
tr
Rise Time
*2
Fall Time
10
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tf
N: 50 to 400 (%)
*2 Test circuit for switching time
Pulse Input
VCC
PW = 100 µs
Duty cycle = 1/10
IF
In monitor
4
0.4
pF
4
µs
5
*1 CTR rank
VOUT
50 Ω
Ω
11
RL = 100 Ω
Data Sheet PN10259EJ01V0DS
PS2865-1
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
100
80
60
40
20
50
25
0
100
75
210
180
150
120
90
60
30
100
75
Ambient Temperature TA ( ˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
35
Collector Current IC (mA)
30
Forward Current IF (mA)
50
Ambient Temperature TA (˚C)
100
10
25
0
TA = +100 ˚C
+60 ˚C
+25 ˚C
1
0 ˚C
–25 ˚C
–50 ˚C
0.1
IF = 25 mA
20 mA
15 mA
25
10 mA
20
15
5 mA
10
5
Collector to Emitter Dark Current ICEO (nA)
0.01
0.0
0.5
1.0
1.5
0
2.0
2
4
6
8
10
Forward Voltage VF (V)
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
10 000
Collector Current IC (mA)
100
1 000
VCE = 20 V
40 V
100
10
1
–25
0
25
50
75
100
10 mA
5 mA
2 mA
10
1
0.1
0.0
Ambient Temperature TA (˚C)
IF = 1mA
0.2
0.4
0.6
0.8
1.0
Collector Saturation Voltage VCE(sat) (V)
Data Sheet PN10259EJ01V0DS
5
PS2865-1
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
1.4
400
1.2
350 VCE = 5 V,
n=3
1.0
0.8
0.6
0.4
Normalized to 1.0
at TA = 25 ˚C,
IF = 5 mA, VCE = 5 V
0.2
0.0
–50
0
–25
25
50
300
250
Sample A
B
C
200
150
100
50
0
0.1
100
75
1
100
10
Ambient Temperature TA (˚C)
Forward Current IF (mA)
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
100
1 000
IF = 1 mA,
VCC = 5 V,
CTR = 200 %
10
Switching Time t (µs)
IC = 2 mA,
VCC = 5 V,
CTR = 200 %
Switching Time t (µ s)
Current Transfer Ratio CTR (%)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
tf
tr
td
1
10
ts
100
100
ts
10
tr
td
1
0.1
10
10 k
1k
tf
100
1k
10 k
100 k
Load Resistance RL (Ω)
Load Resistance RL (Ω)
LONG TERM CTR DEGRADATION
FREQUENCY RESPONSE
1.2
IF = 5 mA
1.0
–5
CTR (Relative Value)
Normalized Gain Gv
0
100 Ω
RL = 1 kΩ
–10
300 Ω
–15
IF = 1 mA, TA = 25 ˚C
IF = 5 mA, TA = 25 ˚C
IF = 20 mA, TA = 25 ˚C
IF = 20 mA, TA = 60 ˚C
0.6
0.4
0.2
–20
–25
0.1
0.8
1
10
100
1 000
0.0
1
103
104
Time (Hr)
Frequency f (kHz)
Remark The graphs indicate nominal characteristics.
6
102
Data Sheet PN10259EJ01V0DS
105
106
PS2865-1
TAPING SPECIFICATIONS (UNIT: mm)
φ 1.5+0.1
–0
7.5±0.1
4.0±0.1
16.0±0.3
2.0±0.1
7.55±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.8 MAX.
0.3
1.55±0.1
2.3±0.1
2.85±0.1
4.0±0.1
Tape Direction
N65
003
N65
003
N65
003
N65
003
N65
003
N65
003
N65
003
N65
003
N65
003
PS2865-1-F4
N65
003
PS2865-1-F3
Outline and Dimensions (Reel)
R 1.0
φ 21.0±0.8
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
17.5±1.0
21.5±1.0
Packing: 3 500 pcs/reel
Data Sheet PN10259EJ01V0DS
15.9 to 19.4
Outer edge of
flange
7
PS2865-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
235 °C or below (package surface temperature)
• Time of temperature higher than 210 °C
30 seconds or less
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt % is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
100 to 160 ˚C
60 to 120 s
(preheating)
Time (s)
(2) Dip soldering
• Temperature
260 °C or below (molten solder temperature)
• Time
10 seconds or less
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of
0.2 Wt % is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
8
Data Sheet PN10259EJ01V0DS
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.