VISHAY 30D107G016DC2

TE
www.vishay.com
Vishay Sprague
Aluminum Capacitors
Little-Lytic Electrolytics
FEATURES
DESCRIPTION
VALUE
Operating temperature
Tolerance on CR
Ripple current
Life validation test
2000 h at + 85 °C
- 40 °C to + 105 °C
G = + 75 %, - 10 % and
F = + 50 %, - 10 %
10  to 600  max. at 120 Hz,
depending upon capacitance
After test, capacitance value shall
not have changed by more than ± 20 %,
the equivalent series resistance in ohms
shall not have exceeded 150 % of initial
requirement and the leakage current
shall not have exceeded the
initial requirement.
DC leakage current
Maximum DC leakage current at + 25 °C
for all capacitors is 15 μA, except units
in case code DD, which is 15.8 μA.
Shelf test
250 h at + 85 °C,
with no voltage applied
The capacitance and equivalent series
resistance shall meet the initial
requirements and the DC leakage
current shall not exceed 300 % of the
initial requirement.
CAPACITANCE VS. TEMPERATURE
Capacitance Ratio at 120 Hz
QUICK REFERENCE DATA
• Proven dependable performance in the industrial
and electronic equipment with either transistor or
modified electron-tube circuits
• All terminal connections welded, eliminating
possibility of open or intermittent contacts occasionally
found in pressure joints of conventional capacitors
• Superior in size, performance characteristics, shelf life,
construction and reliability
• Metal-encased with clear plastic outer insulating sleeve
• Excellent circuit performance when used as coupling
capacitors
• Minimum drain and long battery life when used in battery
bypass applications
• Better performance under life test than most miniature
aluminum electrolytic capacitors
• Axial lead
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
1.2
800 µF - 3 V
300 µF - 16 V
200 µF - 25 V
100 µF - 50 V
25 µF - 100 V
1.1
1.0
Typical
0.9
- 40
- 20
0
+ 20 + 40
+ 60
Temperature in °C
+ 80
+ 100 + 120
DIMENSIONS in inches [millimeters]
CASE CODE
D
L
CASE CODE
D
L
0.848 [21.539]
BA
0.260 [6.604]
0.536 [13.614]
DC
0.385 [9.779]
BB
0.260 [6.604]
0.723 [18.364]
DD
0.385 [9.779]
0.973 [24.714]
CB
0.322 [8.179]
0.723 [18.364]
DF
0.385 [9.779]
1.286 [32.664]
DH
0.385 [9.779]
1.536 [39.014]
CC
0.322 [8.179]
0.848 [21.539]
DB
0.385 [9.779]
0.723 [18.364]
DIMENSIONS AND AVAILABLE FORMS
1.500
[38.10]
min.
L
1.500
[38.10]
min.
D
0.032 [0.811] dia.
No. 20 AWG tinned copper leads
Revision: 28-Aug-12
Document Number: 42042
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TE
www.vishay.com
Vishay Sprague
ORDERING EXAMPLE
Order by distribution part no. Example: TE1055
Note
• For lead (Pb)-free/RoHS compliant products add the suffix “-E3” to the shortened Distribution part. no.
Example: TE1055-E3
Note
• For lead (Pb)-free/RoHS compliant products add the suffix “E3” to the standard OEM part no.
Example: 30D256G003BA2E3
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
CASE CODE
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
50.0
75.0
100.0
200.0
300.0
500.0
BA
CB
CC
DC
DF
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
35.0
50.0
75.0
100.0
200.0
250.0
300.0
400.0
500.0
600.0
BA
BB
BB
CB
DC
DD
DD
DF
DH
DH
DISTRIBUTOR
PART NUMBER
DESCRIPTOR
PART NUMBER
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
See 25 WVDC listing
See 25 WVDC listing
See 25 WVDC listing
See 16 WVDC listing
See 12 WVDC listing
See 6 WVDC listing
TE1055
See 6 WVDC listing
See 6 WVDC listing
TE1059.5
TE1064
TE1066
TE1068
30D256G003BA2
30D107G003CB2
30D207G003CC2
30D307G003DC2
30D507G003DF2
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
See 25 WVDC listing
See 25 WVDC listing
See 25 WVDC listing
See 16 WVDC listing
See 12 WVDC listing
TE1090
See 16 WVDC listing
TE1093
TE1100
TE1101.5
See 12 WVDC listing
TE1104
TE1105
TE1106
TE1107
TE1107.5
TE1108.5
30D206G006BA2
30D356G006BB2
30D506G006BB2
30D756G006CB2
30D207G006DC2
30D257G006DD2
30D307G006DD2
30D407G006DF2
30D507G006DH2
30D607G006DH2
3 WVDC
6 WVDC
Revision: 28-Aug-12
Document Number: 42042
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TE
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
CASE CODE
DISTRIBUTOR
PART NUMBER
DESCRIPTOR
PART NUMBER
12 WVDC
1.0
-
See 50 WVDC listing
-
2.0
-
See 50 WVDC listing
-
3.0
-
See 50 WVDC listing
-
4.0
-
See 50 WVDC listing
-
5.0
-
See 25 WVDC listing
-
6.0
-
See 25 WVDC listing
-
8.0
-
See 25 WVDC listing
-
10.0
-
See 16 WVDC listing
-
15.0
BA
TE1129
30D156G012BA2
20.0
-
See 16 WVDC listing
-
25.0
-
See 16 WVDC listing
-
50.0
-
See 16 WVDC listing
-
60.0
CB
TE1133.5
30D606G012CB2
75.0
-
See 16 WVDC listing
-
100.0
CC
TE1135
30D107G012CC2
150.0
-
See 16 WVDC listing
—
200.0
-
See 16 WVDC listing
—
250.0
-
See 16 WVDC listing
—
290.0
DF
TE1139
30D297G012DF2
16 WVDC
1.0
-
See 50 WVDC listing
-
2.0
-
See 50 WVDC listing
-
3.0
-
See 50 WVDC listing
-
4.0
-
See 50 WVDC listing
-
5.0
-
See 25 WVDC listing
-
6.0
-
See 25 WVDC listing
-
8.0
-
See 25 WVDC listing
-
10.0
BA
TE1155
30D106G016BA2
15.0
-
See 25 WVDC listing
-
20.0
BB
TE1157
30D206G016BB2
25.0
BB
TE1157.1
30D256G016BB2
30.0
-
See 25 WVDC listing
-
35.0
-
See 25 WVDC listing
-
50.0
CB
TE1160
30D506G016CB2
75.0
CC
TE1161
30D756G016CC2
100.0
DC
TE1162
30D107G016DC2
150.0
DD
TE1163
30D157G016DD2
200.0
DF
TE1164
30D207G016DF2
250.0
DF
TE1164.5
30D257G016DF2
300.0
DH
TE1165.5
30D307G016DH2
350.0
DH
TE1166
30D357G016DH2
Revision: 28-Aug-12
Document Number: 42042
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TE
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
CASE CODE
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
30.0
35.0
50.0
75.0
100.0
150.0
200.0
BA
BA
BA
BB
BB
CB
CB
CB
CB
CC
DC
DD
DF
DH
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
15.0
20.0
25.0
35.0
50.0
75.0
100.0
BA
BA
BA
BA
BB
BB
BB
CB
CB
CC
CC
DC
DD
DF
DH
1.0
2.0
3.0
4.0
5.0
10.0
15.0
20.0
25.0
30.0
BA
BB
CB
CB
CC
DC
DD
DF
DH
DH
1.0
2.0
3.0
4.0
5.0
8.0
10.0
15.0
20.0
BA
BB
CB
CC
CC
DC
DD
DF
DH
DISTRIBUTOR
PART NUMBER
DESCRIPTOR
PART NUMBER
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
See 50 WVDC listing
TE1202
TE1203
TE1203.5
TE1204
TE1205
TE1206
TE1207
TE1207.5
TE1208
TE1209
TE1210
TE1211
TE1212
TE1213
30D505G025BA2
30D605G025BA2
30D805G025BA2
30D106G025BB2
30D156G025BB2
30D206G025CB2
30D256G025CB2
30D306G025CB2
30D356G025CB2
30D506G025CC2
30D756G025DC2
30D107G025DD2
30D157G025DF2
30D207G025DH2
TE1300
TE1301
TE1302
TE1302.1
TE1303
TE1303.1
TE1303.3
TE1304
TE1304.2
TE1305
TE1305.5
TE1306
TE1307
TE1308
TE1309
30D105G050BA2
30D205G050BA2
30D305G050BA2
30D405G050BA2
30D505G050BB2
30D605G050BB2
30D805G050BB2
30D106G050CB2
30D156G050CB2
30D206G050CC2
30D256G050CC2
30D356G050DC2
30D506G050DD2
30D756G050DF2
30D107G050DH2
TE1400
TE1401
TE1402
TE1403
TE1404
TE1407
TE1408
TE1409
TE1410
TE1411
30D105F100BA2
30D205F100BB2
30D305F100CB2
30D405F100CB2
30D505F100CC2
30D106F100DC2
30D156F100DD2
30D206F100DF2
30D256F100DH2
30D306F100DH2
TE1500
TE1501
TE1502
TE1503
TE1504
TE1506
TE1507
TE1508.1
TE1509
30D105F150BA2
30D205F150BB2
30D305F150CB2
30D405F150CC2
30D505F150CC2
30D805F150DC2
30D106F150DD2
30D156F150DF2
30D206F150DH2
25 WVDC
50 WVDC
100 WVDC
150 WVDC
Revision: 28-Aug-12
Document Number: 42042
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000