ZT89 MECHANICAL DATA Dimensions in mm (inches) 5.84 (0.230) 5.31 (0.209) MEDIUM POWER SILICON NPN PLANAR TRANSISTOR 12.7 (0.500) min. 5.33 (0.210) 4.32 (0.170) 4.95 (0.195) 4.52 (0.178) 0.48 (0.019) 0.41 (0.016) dia. General Purpose Bipolar NPN Transistor in a hermetically sealed TO18 (TO-206AA) Metal Package. 2.54 (0.100) Nom. VCEO = 65V 3 1 2 IC = 500mA PTOT = 300mW TO18 PACKAGE (TO-206AA) Underside View Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC PTOT RθJC Tstg,Tj Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Dissipation @ Tamb = 25°C Derating linearly Thermal Resistance Storage and Operatuing Junction Temperature 65V 65V 5V 500mA 300mW 2mW/°C 500°C/W –65 to 175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4126 Issue 1 ZT89 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit V VCEO(SUS) Collector – Emitter Sustaining Voltage IC = 10mA IB = 0 VCE(sat) Collector – Emitter Saturation Voltage IC = 50mA IB = 5mA 0.2 VBE(sat) Base – Emitter Saturation Voltage IC = 75mA IB = 3mA 1.2 ICBO Collector Cut-off Current VCB = 65V IE = 0 0.5 µA IEBO Emitter - Base Reverse Current VEB = 5V IC = 0 0.1 µA VCE = 0.4V IC = 1mA 35 VCE = 0.4V IC = 10mA 50 VCE = 0.4V IC = 30mA 35 VCE = 0.75V IC = 75mA 25 VCE = 6V IC = 10mA 50 VCE = 6V IE = 0 hFE DC Current Gain fT Transition Frequency Cob Output Capacitance f = 1MHz 65 200 MHz 20 pF Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4126 Issue 1