SEME-LAB 2N5154XSMD

2N5154XSMD
MECHANICAL DATA
Dimensions in mm (inches)
3
2
9 .6
9 .3
1 1 .5
1 1 .2
7 (0
8 (0
8 (0
8 (0
.3 8
.3 6
.4 5
.4 4
DESCRIPTION
1 )
9 )
6 )
4 )
0 .5 0 (0 .0 2 0 )
0 .2 6 (0 .0 1 0 )
SMD (TO-276AB)
The 2N5154XSMD is a silicon expitaxial
planar NPN transistors in a Ceramic Surface
Mount Package for use in Switching and
Linear applications.
The 2N5154XSMD is also available with
reverse Base, Emitter Connections
Underside View
PAD 1 = Base
HIGH SPEED
MEDIUM VOLTAGE
SWITCH
3 .6 0 (0 .1 4 2 )
M a x .
1 6 .0 2 (0 .6 3 1 )
1 5 .7 3 (0 .6 1 9 )
4 .1 4 (0 .1 6 3 )
3 .8 4 (0 .1 5 1 )
1
1 0 .6 9 (0 .4 2 1 )
1 0 .3 9 (0 .4 0 9 )
0 .7 6
(0 .0 3 0 )
m in .
0 .8 9
(0 .0 3 5 )
m in .
3 .7 0 (0 .1 4 6 )
3 .7 0 (0 .1 4 6 )
3 .4 1 (0 .1 3 4 )
3 .4 1 (0 .1 3 4 )
PAD 2 = Collector PAD = 3 – Emitter
ABSOLUTE MAXIMUM RATINGS TCASE = 25°c unless otherwise stated
VCBO
Collector – Base Voltage (IE = 0)
100V
VCEO
Collector – Emitter Voltage (IB = 0)
80V
VEBO
Emitter – Base Voltage (IC = 0)
6V
IC
Continuous Collector Current
5A
IC(PK)
Peak Collector Current
10A
IB
Base Current
1A
Ptot
Total Dissipation at Tamb = 25°C
1W
Tcase = 50°C
10W
Tcase = 100°C
6.7W
Tstg
Operating and Storage Temperature Range
Tj
Junction temperature
–65 to +200°C
200°C
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 6226
Issue 1
2N5154XSMD
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
Parameter
ICES
Collector Cut Off Current
ICEV
Collector Cut Off Current
ICEO
Collector Cut Off Current
IEBO
Emitter Cut Off Current
VCEO(SUS)* Collector Emitter Saturation Voltage
VCE(sat)*
Collector Emitter Saturation Voltage
VBE(sat)*
Base Emitter Saturation Voltage
VBE*
Base Emitter Voltage
hFE*
Test Conditions
Collector Base Capacitance
hFE
Small Signal Current Gain
Typ.
Max.
Unit
VCE = 60V
VBE = 0
1
µA
VCE = 100V
VBE = 0
1
mA
VCE = 60V
Tcase = 150°C
500
VBE = -2V
µA
VCE = 40V
IB = 0
50
VEB = 4V
IC = 0
1
µA
VEB = 5.5V
IC = 0
1
mA
IC = 100mA
IB = 0
IC = 2.5A
IB = 250mA
0.75
IC = 5A
IB = 500mA
1.5
IC = 2.5A
IB = 250mA
1.45
IC = 5A
IB = 500mA
2.2
IC = 2.5A
VCE = 5V
1.45
IC = 50mA
VCE = 5V
50
IC = 2.5A
VCE = 5V
60
25
IC = 5A
Tc = -55°C
VCE = 5V
IE = 0
VCB = 10V
DC Current Gain
CCBO
Min.
80
V
200
—
30
250
pF
f = 1MHz
IC = 0.1A
VCE = 5V
50
VCE = 5v
3.5
f = 1KHz
IC = 0.5A
—
f = 20MHz
ton
Turn On Time
IC = 5A
VCC = 30v
IB1 = 0.5A
toff
Turn Off Time
IC = 5A
VCC = 30V
IB1=-IB2 = 0.5A
0.5
µs
1.3
* Pulse test tp = 300µs , δ < 2%
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 6226
Issue 1