PHILIPS 74LVC1G157GM

74LVC1G157
Single 2-input multiplexer
Rev. 6 — 31 December 2012
Product data sheet
1. General description
The 74LVC1G157 is a single 2-input multiplexer which select data from two data inputs (I0
and I1) under control of a common data select input (S). The state of the common data
select input determines the particular register from which the data comes. The output (Y)
presents the selected data in the true (non-inverted) form.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these
devices as translators in mixed 3.3 V and 5 V applications.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise and
fall times.
2. Features and benefits
 Wide supply voltage range from 1.65 V to 5.5 V
 High noise immunity
 Complies with JEDEC standard:
 JESD8-7 (1.65 V to 1.95 V)
 JESD8-5 (2.3 V to 2.7 V)
 JESD8B/JESD36 (2.7 V to 3.6 V)
 24 mA output drive (VCC = 3.0 V)
 CMOS low power consumption
 Latch-up performance exceeds 250 mA
 Direct interface with TTL levels
 Inputs accept voltages up to 5 V
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
3. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature
range
Name
Description
Version
74LVC1G157GW
40 C to +125 C
SC-88
plastic surface-mounted package; 6 leads
SOT363
74LVC1G157GV
40 C to +125 C
SC-74
plastic surface-mounted package (TSOP6); 6 leads
SOT457
74LVC1G157GM
40 C to +125 C
XSON6
plastic extremely thin small outline package; no leads; SOT886
6 terminals; body 1  1.45  0.5 mm
74LVC1G157GF
40 C to +125 C
XSON6
plastic extremely thin small outline package; no leads; SOT891
6 terminals; body 1  1  0.5 mm
74LVC1G157GN
40 C to +125 C
XSON6
extremely thin small outline package; no leads;
6 terminals; body 0.9  1.0  0.35 mm
SOT1115
74LVC1G157GS
40 C to +125 C
XSON6
extremely thin small outline package; no leads;
6 terminals; body 1.0  1.0  0.35 mm
SOT1202
4. Marking
Table 2.
Marking
Type number
Marking code[1]
74LVC1G157GW
YP
74LVC1G157GV
YP
74LVC1G157GM
YP
74LVC1G157GF
YP
74LVC1G157GN
YP
74LVC1G157GS
YP
[1]
The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
6
1
3
I1
S
I0
6
3
Y
1
G1
1 MUX
4
1
4
001aac652
Fig 1.
Logic symbol
74LVC1G157
Product data sheet
001aac653
Fig 2.
IEC logic symbol
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
2 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
I1
I0
1
3
4
MULTIPLEXER
OUTPUT S
SELECTOR
Y
6
001aac655
S
Fig 3.
Functional diagram
S
I1
Y
I0
001aac654
Fig 4.
Logic diagram
6. Pinning information
6.1 Pinning
74LVC1G157
74LVC1G157
I1
1
6
I1
1
6
S
GND
2
5
VCC
74LVC1G157
S
GND
2
5
VCC
I0
3
4
Y
I0
3
4
Y
001aac657
Fig 5.
Pin configuration SOT363
and SOT457
74LVC1G157
Product data sheet
Fig 6.
Pin configuration SOT886
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
1
6
S
GND
2
5
VCC
I0
3
4
Y
001aaf545
Transparent top view
001aac656
I1
Transparent top view
Fig 7.
Pin configuration SOT891,
SOT1115 and SOT1202
© NXP B.V. 2012. All rights reserved.
3 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
6.2 Pin description
Table 3.
Pin description
Symbol
Pin
Description
I1
1
data input from source 1
GND
2
ground (0 V)
I0
3
data input from source 0
Y
4
multiplexer output
VCC
5
supply voltage
S
6
common data select input
7. Functional description
Table 4.
Function table[1]
Inputs
Output
S
I1
I0
Y
L
X
L
L
L
X
H
H
H
L
X
L
H
H
X
H
[1]
H = HIGH voltage level;
L = LOW voltage level;
X = don’t care.
8. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
VCC
supply voltage
IIK
input clamping current
VI
input voltage
IOK
output clamping current
output voltage
VO
IO
output current
ICC
supply current
IGND
ground current
Ptot
total power dissipation
Tstg
storage temperature
Conditions
VI < 0 V
Min
Max
Unit
0.5
+6.5
V
50
-
mA
0.5
+6.5
V
-
50
mA
Active mode
[1][2]
0.5
VCC + 0.5
V
Power-down mode
[1][2]
0.5
+6.5
V
-
50
mA
-
100
mA
100
-
mA
-
250
mW
65
+150
C
[1]
VO > VCC or VO < 0 V
VO = 0 V to VCC
Tamb = 40 C to +125 C
[3]
[1]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3]
For SC-88 and SC-74 packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 package: above 118 C the value of Ptot derates linearly with 7.8 mW/K.
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
4 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
9. Recommended operating conditions
Table 6.
Recommended operating conditions
Symbol
Parameter
VCC
Conditions
Min
Typ
Max
Unit
supply voltage
1.65
-
5.5
V
VI
input voltage
0
-
5.5
V
VO
output voltage
Active mode
-
-
VCC
V
VCC = 0 V; Power-down mode
-
-
5.5
V
Tamb
ambient temperature
40
-
+125
C
t/V
input transition rise and fall rate VCC = 1.65 V to 2.7 V
-
-
20
ns/V
-
-
10
ns/V
VCC = 2.7 V to 5.5 V
10. Static characteristics
Table 7.
Static characteristics
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
VIH
VIL
VOH
VOL
II
HIGH-level
input voltage
LOW-level
input voltage
40 C to +85 C
Conditions
Max
Min
Max
0.65VCC
-
-
0.65VCC
-
V
VCC = 2.3 V to 2.7 V
1.7
-
-
1.7
-
V
VCC = 2.7 V to 3.6 V
2.0
-
-
2.0
-
V
VCC = 4.5 V to 5.5 V
0.7VCC
-
-
0.7VCC
-
V
VCC = 1.65 V to 1.95 V
-
-
0.35VCC
-
VCC = 1.65 V to 1.95 V
Product data sheet
0.35VCC V
VCC = 2.3 V to 2.7 V
-
-
0.7
-
0.7
V
VCC = 2.7 V to 3.6 V
-
-
0.8
-
0.8
V
VCC = 4.5 V to 5.5 V
-
-
0.3VCC
-
0.3VCC
V
VCC  0.1
-
-
VCC  0.1
-
V
IO = 4 mA; VCC = 1.65 V
1.2
1.54
-
0.95
-
V
IO = 8 mA; VCC = 2.3 V
1.9
2.15
-
1.7
-
V
IO = 12 mA; VCC = 2.7 V
2.2
2.50
-
1.9
-
V
IO = 24 mA; VCC = 3.0 V
2.3
2.62
-
2.0
-
V
IO = 32 mA; VCC = 4.5 V
3.8
4.11
-
3.4
-
V
-
-
0.10
-
0.10
V
IO = 4 mA; VCC = 1.65 V
-
0.07
0.45
-
0.70
V
IO = 8 mA; VCC = 2.3 V
-
0.12
0.30
-
0.45
V
IO = 12 mA; VCC = 2.7 V
-
0.17
0.40
-
0.60
V
IO = 24 mA; VCC = 3.0 V
-
0.33
0.55
-
0.80
V
IO = 32 mA; VCC = 4.5 V
-
0.39
0.55
-
0.80
V
-
0.1
5
-
20
A
LOW-level
VI = VIH or VIL
output voltage
IO = 100 A;
VCC = 1.65 V to 5.5 V
74LVC1G157
Unit
Min
HIGH-level
VI = VIH or VIL
output voltage
IO = 100 A;
VCC = 1.65 V to 5.5 V
input leakage
current
40 C to +125 C
Typ[1]
VI = 5.5 V or GND;
VCC = 0 V to 5.5 V
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
5 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
Table 7.
Static characteristics …continued
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
40 C to +85 C
Conditions
Unit
Min
Max
Min
Max
-
0.1
10
-
20
A
IOFF
power-off
leakage
current
ICC
supply current VI = 5.5 V or GND; IO = 0 A;
VCC = 1.65 V to 5.5 V
-
0.1
10
-
40
A
ICC
additional
per pin; VCC = 2.3 V to 5.5 V;
supply current VI = VCC  0.6 V; IO = 0 A
-
5
500
-
5000
A
CI
input
capacitance
-
2.5
-
-
-
pF
[1]
VCC = 0 V; VI or VO = 5.5 V
40 C to +125 C
Typ[1]
VCC = 3.3 V; VI = GND to VCC
All typical values are measured at Tamb = 25 C.
11. Dynamic characteristics
Table 8.
Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for load circuit see Figure 9.
Symbol Parameter
40 C to +85 C
Conditions
propagation delay I0, I1 to Y; see Figure 8
tpd
Max
Min
Max
1.5
4.3
11.0
1.5
13.0
Unit
ns
VCC = 2.3 V to 2.7 V
1.0
2.9
6.1
1.0
7.6
ns
VCC = 2.7 V
1.0
3.1
5.6
1.0
7.0
ns
VCC = 3.0 V to 3.6 V
1.0
2.7
5.0
1.0
6.3
ns
0.5
2.2
4.0
0.5
5.0
ns
VCC = 1.65 V to 1.95 V
1.5
4.3
11.0
1.5
13.0
ns
VCC = 2.3 V to 2.7 V
1.0
2.9
6.9
1.0
8.6
ns
VCC = 2.7 V
1.0
3.3
5.9
1.0
7.4
ns
VCC = 3.0 V to 3.6 V
1.0
2.9
5.0
1.0
6.3
ns
VCC = 4.5 V to 5.5 V
0.5
2.3
4.0
0.5
5.0
ns
-
18
-
-
-
pF
VCC = 4.5 V to 5.5 V
S to Y; see Figure 8
power dissipation
capacitance
Typ[1]
[2]
VCC = 1.65 V to 1.95 V
CPD
40 C to +125 C
Min
VI = GND to VCC; VCC = 3.3 V
[2]
[3]
[1]
Typical values are measured at Tamb = 25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2]
tpd is the same as tPLH and tPHL.
[3]
CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD  VCC2  fi  N + (CL  VCC2  fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts;
N = number of inputs switching;
(CL  VCC2  fo) = sum of the outputs.
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
6 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
12. Waveforms
VI
VM
I0, I1, S input
GND
tPHL
tPLH
VOH
VM
Y output
VOL
001aac658
Measurement points are given in Table 9.
VOL and VOH are typical output voltage levels that occur with the output load.
Fig 8.
Table 9.
Data inputs (I0, I1) and common data select input (S) to output (Y) propagation delays
Measurement points
Supply voltage
Input
Output
VCC
VM
VM
1.65 V to 1.95 V
0.5VCC
0.5VCC
2.3 V to 2.7 V
0.5VCC
0.5VCC
2.7 V
1.5 V
1.5 V
3.0 V to 3.6 V
1.5 V
1.5 V
4.5 V to 5.5 V
0.5VCC
0.5VCC
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
7 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
VEXT
VCC
VI
RL
VO
G
DUT
RT
CL
RL
mna616
Test data is given in Table 10.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance; should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 9.
Table 10.
Test circuit for measuring switching times
Test data
Supply voltage
Input
VCC
VI
tr = tf
CL
RL
tPLH, tPHL
1.65 V to 1.95 V
VCC
 2.0 ns
30 pF
1 k
open
2.3 V to 2.7 V
VCC
 2.0 ns
30 pF
500 
open
2.7 V
2.7 V
 2.5 ns
50 pF
500 
open
3.0 V to 3.6 V
2.7 V
 2.5 ns
50 pF
500 
open
4.5 V to 5.5 V
VCC
 2.5 ns
50 pF
500 
open
74LVC1G157
Product data sheet
Load
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
VEXT
© NXP B.V. 2012. All rights reserved.
8 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
13. Package outline
Plastic surface-mounted package; 6 leads
SOT363
D
E
B
y
X
A
HE
6
5
v M A
4
Q
pin 1
index
A
A1
1
2
e1
3
bp
c
Lp
w M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
max
bp
c
D
E
e
e1
HE
Lp
Q
v
w
y
mm
1.1
0.8
0.1
0.30
0.20
0.25
0.10
2.2
1.8
1.35
1.15
1.3
0.65
2.2
2.0
0.45
0.15
0.25
0.15
0.2
0.2
0.1
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
SOT363
JEITA
SC-88
EUROPEAN
PROJECTION
ISSUE DATE
04-11-08
06-03-16
Fig 10. Package outline SOT363 (SC-88)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
9 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
Plastic surface-mounted package (TSOP6); 6 leads
D
SOT457
E
B
y
A
HE
6
5
X
v M A
4
Q
pin 1
index
A
A1
c
1
2
3
Lp
bp
e
w M B
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
bp
c
D
E
e
HE
Lp
Q
v
w
y
mm
1.1
0.9
0.1
0.013
0.40
0.25
0.26
0.10
3.1
2.7
1.7
1.3
0.95
3.0
2.5
0.6
0.2
0.33
0.23
0.2
0.2
0.1
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
SOT457
JEITA
SC-74
EUROPEAN
PROJECTION
ISSUE DATE
05-11-07
06-03-16
Fig 11. Package outline SOT457 (SC-74)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
10 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
SOT886
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
b
1
2
3
4x
(2)
L
L1
e
6
5
e1
4
e1
6x
A
(2)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
max
nom
min
A(1)
0.5
A1
b
D
E
0.04 0.25 1.50 1.05
0.20 1.45 1.00
0.17 1.40 0.95
e
e1
0.6
0.5
L
L1
0.35 0.40
0.30 0.35
0.27 0.32
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
Outline
version
SOT886
sot886_po
References
IEC
JEDEC
JEITA
European
projection
Issue date
04-07-22
12-01-05
MO-252
Fig 12. Package outline SOT886 (XSON6)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
11 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
1
SOT891
b
3
2
4×
(1)
L
L1
e
6
5
4
e1
e1
6×
A
(1)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max
A1
max
b
D
E
e
e1
L
L1
mm
0.5
0.04
0.20
0.12
1.05
0.95
1.05
0.95
0.55
0.35
0.35
0.27
0.40
0.32
Note
1. Can be visible in some manufacturing processes.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
05-04-06
07-05-15
SOT891
Fig 13. Package outline SOT891 (XSON6)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
12 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
XSON6: extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm
1
SOT1115
b
3
2
(4×)(2)
L
L1
e
6
5
4
e1
e1
(6×)(2)
A1
A
D
E
terminal 1
index area
0
0.5
scale
Dimensions
Unit
mm
1 mm
A(1)
A1
b
D
E
e
e1
max 0.35 0.04 0.20 0.95 1.05
nom
0.15 0.90 1.00 0.55
min
0.12 0.85 0.95
L
L1
0.35 0.40
0.30 0.35
0.27 0.32
0.3
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
Outline
version
sot1115_po
References
IEC
JEDEC
JEITA
European
projection
Issue date
10-04-02
10-04-07
SOT1115
Fig 14. Package outline SOT1115 (XSON6)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
13 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm
1
SOT1202
b
3
2
(4×)(2)
L
L1
e
6
5
4
e1
e1
(6×)(2)
A1
A
D
E
terminal 1
index area
0
0.5
scale
Dimensions
Unit
mm
1 mm
A(1)
A1
b
D
E
e
e1
L
L1
max 0.35 0.04 0.20 1.05 1.05
0.35 0.40
nom
0.15 1.00 1.00 0.55 0.35 0.30 0.35
min
0.12 0.95 0.95
0.27 0.32
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
Outline
version
sot1202_po
References
IEC
JEDEC
JEITA
European
projection
Issue date
10-04-02
10-04-06
SOT1202
Fig 15. Package outline SOT1202 (XSON6)
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
14 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
14. Abbreviations
Table 11.
Abbreviations
Acronym
Description
CMOS
Complementary Metal Oxide Semiconductor
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MM
Machine Model
TTL
Transistor-Transistor Logic
15. Revision history
Table 12.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74LVC1G157 v.6
20121231
Product data sheet
-
74LVC1G157 v.5
Modifications:
74LVC1G157 v.5
Modifications:
•
Package outline drawing of SOT886 (Figure 12) modified.
20111206
•
Product data sheet
-
74LVC1G157 v.4
Legal pages updated.
74LVC1G157 v.4
20101028
Product data sheet
-
74LVC1G157 v.3
74LVC1G157 v.3
20070712
Product data sheet
-
74LVC1G157 v.2
74LVC1G157 v.2
20061011
Product data sheet
-
74LVC1G157 v.1
74LVC1G157 v.1
20050425
Product data sheet
-
-
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
15 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
16. Legal information
16.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
16.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
74LVC1G157
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
16 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74LVC1G157
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 31 December 2012
© NXP B.V. 2012. All rights reserved.
17 of 18
74LVC1G157
NXP Semiconductors
Single 2-input multiplexer
18. Contents
1
2
3
4
5
6
6.1
6.2
7
8
9
10
11
12
13
14
15
16
16.1
16.2
16.3
16.4
17
18
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 5
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
Dynamic characteristics . . . . . . . . . . . . . . . . . . 6
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15
Legal information. . . . . . . . . . . . . . . . . . . . . . . 16
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Contact information. . . . . . . . . . . . . . . . . . . . . 17
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 31 December 2012
Document identifier: 74LVC1G157