Oscilent Corporation RF SAW Filter | 803-RF425.0M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 803-RF425.0M-B 3.8 x 3.8 SMD Wireless Communication Apr. 12 2003 . TYPE : 425.0 MHz RF SAW Filter PART NUMBER : 803-RF425.0M-B . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Ripple Stopband Attenuation Teminating Impedance Condition Minimum Typical Maximum Units - - 425.0 - MHz 423.0 ~ 427.0 MHz - 1.8 3.5 dB 423.0 ~ 427.0 MHz - 0.5 1.5 dB Fo -200.0 ~ Fo -42.8 MHz 50.0 55.0 - dB Fo +40.0 ~ Fo +200.0 MHz 50.0 55.0 - - - 150/0 - ohm/pF * Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A Ground B Input C Ground D Ground E Output F Ground Test Fixture Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_803_rf425_0b.htm 12/28/2005 Oscilent Corporation RF SAW Filter | 803-RF425.0M-B Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Page 2 of 2 Part No.: 803-RF425.0M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_803_rf425_0b.htm 12/28/2005