New Product V20100SG, VF20100SG & VI20100SG Vishay General Semiconductor High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.50 V at IF = 5 A FEATURES TMBS ® TO-220AB • Trench MOS Schottky technology ITO-220AB • Low forward voltage drop, low power losses • High efficiency operation 2 3 1 1 V20100SG 2 • Low thermal resistance 3 • Solder dip 260 °C, 40 s VF20100SG PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 PIN 2 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-262AA K TYPICAL APPLICATIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. 1 2 3 VI20100SG MECHANICAL DATA PIN 1 PIN 2 PIN 3 K Case: TO-220AB, ITO-220AB and TO-262AA Epoxy meets UL 94V-0 flammability rating PRIMARY CHARACTERISTICS IFSM 150 A Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test VF at IF = 20 A 0.75 V Polarity: As marked TJ max. 150 °C Mounting Torque: 10 in-lbs maximum IF(AV) 20 A VRRM 100 V MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20100SG VF20100SG VI20100SG UNIT Maximum repetitive peak reverse voltage VRRM 100 V Maximum average forward rectified current (Fig. 1) IF(AV) 20 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 150 A Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V TJ, TSTG - 40 to + 150 °C Operating junction and storage temperature range Document Number: 88966 Revision: 31-Jul-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product V20100SG, VF20100SG & VI20100SG Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Breakdown voltage Instantaneous forward voltage (1) Reverse IR = 10 mA TA = 25 °C IF = 5 A IF = 10 A IF = 20 A TA = 25 °C SYMBOL TYP. MAX. VBR 105 (minimum) - 0.55 0.66 0.91 1.07 UNIT V VF IF = 5 A IF = 10 A IF = 20 A TA = 125 °C 0.50 0.59 0.75 0.82 VR = 70 V TA = 25 °C TA = 125 °C 15 6 - µA mA VR = 100 V TA = 25 °C TA = 125 °C 60 13 350 25 µA mA current (2) IR Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20100SG VF20100SG VI20100SG UNIT RθJC 2.2 4.0 2.2 °C/W Typical thermal resistance ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V20100SG-E3/4W 1.88 4W 50/tube Tube ITO-220AB VF20100SG-E3/4W 1.74 4W 50/tube Tube TO-262AA VI20100SG-E3/4W 1.45 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 25 24 D = 0.5 20 D = 0.8 D = 0.3 V20100SG VI20100SG Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 16 VF20100SG 12 8 4 D = 0.2 20 D = 1.0 D = 0.1 15 10 T 5 D = tp/T tp 16 20 0 0 0 25 50 75 100 125 150 175 0 4 8 12 24 Case Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88966 Revision: 31-Jul-08 New Product V20100SG, VF20100SG & VI20100SG Vishay General Semiconductor 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TA = 150 °C TA = 125 °C 10 TA = 25 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 0.01 V(I)20100SG 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance 10 Transient Thermal Impedance (°C/W) 100 Instantaneous Reverse Current (mA) 1 0.001 0.01 0.1 0 Junction to Case TA = 150 °C 10 TA = 125 °C 1 0.1 0.01 TA = 25 °C 0.001 10 20 30 40 50 60 70 80 90 100 Junction to Case VF20100SG 1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Figure 7. Typical Transient Thermal Impedance Junction Capacitance (pF) 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Document Number: 88966 Revision: 31-Jul-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product V20100SG, VF20100SG & VI20100SG Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.671 (17.04) 0.651 (16.54) PIN 1 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.076 (1.93) REF. 45° REF. 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.145 (3.68) 0.135 (3.43) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 30° (TYP.) (REF.) 0.250 (6.35) MIN. 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.510 (12.95) 0.470 (11.94) 0.350 (8.89) 0.330 (8.38) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) www.vishay.com 4 0.401 (10.19) 0.381 (9.68) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88966 Revision: 31-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1