SBL10L30, SBLF10L30, SBLB10L30 Vishay General Semiconductor Low VF Schottky Barrier Rectifier TO-220AC ITO-220AC 2 2 1 1 SBL10L30 SBLF10L30 PIN 1 PIN 1 CASE PIN 2 PIN 2 TO-263AB K 2 1 SBLB10L30 PIN 1 PIN 2 K HEATSINK PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 30 V IFSM 200 A VF 0.43 V TJ max. 150 °C FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Very low forward voltage drop • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, OR-ing diode, freewheeling diodes, dc-to-dc converters and polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 30 V Working peak reverse voltage VRWM 21 V Maximum DC blocking voltage VDC 30 V Maximum average forward rectified current at TC = 140 °C IF(AV) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 200 A Peak repetitive reverse current at tp = 2 µs, 1 kHz IRRM 1.0 A Voltage rate of change (rated VR) dV/dt 10 000 V/µs TJ, TSTG - 65 to + 150 °C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88724 Revision: 07-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 SBL10L30, SBLF10L30, SBLB10L30 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) IF = 10 A IF = 10 A Maximum instantaneous reverse current at DC blocking voltage (1) SYMBOL VALUE UNIT TJ = 25 °C TJ = 125 °C VF 0.52 0.43 V TJ = 25 °C TJ = 125 °C IR 1.0 100 mA Note: (1) Pulse test: 300 µs pulse width, 2 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL SBL SBLF SBLB UNIT RθJC 4.3 4.8 4.3 °C/W Typical thermal resistance from junction to case per leg ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC SBL10L30-E3/45 PREFERRED P/N 1.80 45 50/tube Tube ITO-220AC SBLF10L30-E3/45 1.94 45 50/tube Tube TO-263AB SBLB10L30-E3/45 1.33 45 50/tube Tube TO-263AB SBLB10L30-E3/81 1.33 81 800/reel Tape and reel TO-220AC SBL10L30HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC SBLF10L30HE3/45 (1) 1.94 45 50/tube Tube TO-263AB SBLB10L30HE3/45 (1) 1.33 45 50/tube Tube TO-263AB SBLB10L30HE3/81 (1) 1.33 81 800/reel Tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Resistive or Inductive Load Instantaneous Forward Current (A) Average Forward Rectified Current (A) 12.5 10 7.5 5 2.5 10 TJ = 150 °C 1 TJ = 125 °C TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 100 50 150 0 0.2 0.4 0.6 0.8 1.0 Case Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 2. Typical Instantaneous Forward Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88724 Revision: 07-May-08 SBL10L30, SBLF10L30, SBLB10L30 Vishay General Semiconductor 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 1000 TJ = 150 °C 100 10 TJ = 125 °C 1 TJ = 100 °C 0.1 0.01 TJ = 75 °C 0.001 20 40 60 80 100 10 1 0.1 0.01 0.1 1 10 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 3. Typical Reverse Characteristics Figure 5. Typical Transient Thermal Impedance Junction Capacitance (pF) 10 000 1000 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 4. Typical Junction Capacitance Document Number: 88724 Revision: 07-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 SBL10L30, SBLF10L30, SBLB10L30 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88724 Revision: 07-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1