FAIRCHILD FAN8033

www.fairchildsemi.com
FAN8033
6-Channel Motor Drive IC
Features
Description
•
•
•
•
•
•
•
•
•
The FAN8033 is a monolithic integrated circuit suitable for a
6-ch motor driver which drives the tracking actuator, focus
actuator, sled motor, tray motor, change motor and spindle
motor of the CDP/CAR-CD systems.
4-CH balanced transformerless (BTL) driver
2-CH (forward-reverse) control DC motor driver
Operating supply voltage (4.5V ~ 16V)
Built-in thermal shut down circuit (TSD)
Built-in under voltage lockout circuit (UVLO)
Built-in over voltage protection circuit (OVP)
Built-in mute circuit (CH1, CH2, CH3 and CH4)
Built-in normal op-amp
Built-in 5V regulator with reset
48-QFPH-1414
Typical Applications
Ordering Information
• Compact disk player (CDP) with tray and changer
• Video compact disk player (VCD) with tray and changer
• Automotive compact disk player (CDP) with tray and
changer
• Other compact disk media
Device
Package
Operating Temp.
FAN8033
48-QFPH-1414
−35°°C ~ +85°°C
Rev. 1.0.2
February. 2000.
©2000 Fairchild Semiconductor International
1
FAN8033
Pin Assignments
IN1.1 REG50 REG050 REF SVCC RES50
48
47
46
45
44
OPIN(+)OPIN(−)OPOUT PVCC2 DO1.1 DO1.2
43
42
41
40
39
38
37
IN1.2
1
36
DO2.1
OUT1
2
35
DO2.2
IN2.1
3
34
PGND3
IN2.2
4
32
DO3.1
OUT2
5
32
DO3.2
IN3.1
6
31
PGND2
FAN8033
IN3.2
7
30
PGND1
OUT3
8
29
DO4.1
IN4.1
9
28
DO4.2
IN4.2
10
27
DO5.1
OUT4
11
26
DO5.2
CTL1
12
25
DO6.1
13
14
FWD1 REV1
15
16
17
18
19
CTL FWD2 REV2 SGND
20
21
22
23
24
MUTE1MUTE2 MUTE3 MUTE4 PVCC1 DO6.2
2
FAN8033
Pin Definitions
Pin Number
Pin Name
I/O
Pin Function Description
1
IN1.2
I
CH 1 op-amp input (−)
2
OUT1
O
CH 1 op-amp output
3
IN2.1
I
CH 2 op-amp input (+)
4
IN2.2
I
CH 2 op-amp input (−)
5
OUT2
O
CH 2 op-amp output
6
IN3.1
I
CH 3 op-amp input (+)
7
IN3.2
I
CH 3 op-amp input (−)
8
OUT3
O
CH 3 op-amp output
9
IN4.1
I
CH 4 op-amp input (+)
10
IN4.2
I
CH 4 op-amp input (−)
11
OUT4
O
CH 4 op-amp output
12
CTL1
I
CH 5 motor speed control
13
FWD1
I
CH 5 forward input
14
REW1
I
CH 5 reverse input
15
CTL2
I
CH 6 motor speed control
16
FWD2
I
CH 6 forward input
17
REW2
I
CH 6 reverse input
18
SGND
-
Signal ground
19
MUTE1
I
CH 1 mute
20
MUTE2
I
CH 2 mute
21
MUTE3
I
CH 3 mute
22
MUTE4
I
CH 4 mute
23
PVCC1
-
Power supply voltage (For CH 5, CH 6)
24
DO6.2
O
CH 6 drive output
25
DO6.1
O
CH 6 drive output
26
DO5.2
O
CH 5 drive output
27
DO5.1
O
CH 5 drive output
28
DO4.2
O
CH 4 drive output
29
DO4.1
O
CH 4 drive output
30
PGND
-
Power ground
31
PGND
-
Power ground
32
DO3.2
O
CH 3 drive output
33
DO3.1
O
CH 3 drive output
34
PGND
-
Power ground
35
DO2.2
O
CH 2 drive output
36
DO2.1
O
CH 2 drive output
37
DO1.2
O
CH 1 drive output
38
DO1.1
O
CH 1 drive output
39
PVCC2
-
Power supply voltage (For CH 1, CH 2, CH 3, CH 4)
40
OPOUT
O
Opamp output
3
FAN8033
Pin Definitions (Continued)
Pin Number
Pin Name
I/O
Pin Function Description
41
OPIN(−)
I
Opamp input (−)
42
OPIN(+)
I
Opamp input (+)
43
RES50
I
Regulator 5V reset
44
SVCC
-
Signal supply voltage
45
REF
I
Bias voltage input
46
REG050
O
Regulator 5V output
47
REG50
O
Regulator output
48
IN1.1
I
CH 1 opamp input (+)
4
FAN8033
Internal Block Diagram
IN1.1
48
REG50 REG050 REF
47
46
45
SVCC
RES50
44
43
OPIN(+) OPIN(−) OPOUT PVCC2 DO1.1
42
41
40
39
38
DO1.2
37
−
IN1.2
+
1
ALL MUTE
+ −
OUT1
O.V.P
+
−
IN2.2
4
OUT2
5
IN3.1
OUT3
−
+
−
−
+
+
−
+
−
−
+
−
+
−
+
+
−
−
+
+
−
+
−
−
+
−
+
+
−
−
+
6
+
−
IN3.2
+
3
+
−
7
−
+
IN4.1
M
S
C
9
35
DO2.2
34
PGND3
33
DO3.1
32
DO3.2
31
PGND2
30
PGND1
29
DO4.1
28
DO4.2
27
DO5.1
26
DO5.2
25
DO6.1
2P
2P
2P
2P
2P
2P
2P
2P
8
S
W
DO2.1
T.S.D
2
2.5V
IN2.1
36
+
D
−
D
2P
2P
IN4.2 10
+
M
S
C
S
W
D
2P
−
D
2P
OUT4 11
MUTE4
MUTE3
MUTE2
MUTE1
CTL1 12
13
14
15
16
17
18
FWD1
REV1
CTL
FWD2
REV2
SGND
19
20
21
22
23
24
MUTE1 MUTE2 MUTE3 MUTE4 PVCC1 DO6.2
Notes:
1. SW = Logic switch
2. MSC = Motor speed control
3. D = Output driver
5
FAN8033
Equivalent Circuit
Description
Pin No.
Input
OPIN (+)
OPIN (−)
48, 3, 6, 9
1, 4, 7. 10
Internal circuit
VCC
VCC
10k
48 3
1 4
6 9
7 10
10k
4k
Input
opout
2, 5, 8, 11
VCC
VCC
2 5
10k
8 11
Vr
25k
CTL
12, 15
VCC
0.1k
12 15
100k
6
FAN8033
Equivalent Circuit (Continued)
Description
Pin No.
Logic drive
FWD input
REV input
13, 16
14, 17
Internal circuit
VCC
13 6
30k
14 17
30k
CH mute
19, 20
21, 22
VCC
19 20
30k
21 22
Logic
drive
output
2k
24, 25
26, 27
VCC
10k
1k
24 25
26 27
20k
1k
Vr
4-CH
drive
output
28, 29
32, 33
35, 36
37, 38
VCC
28 29
32 33
35 36
10k
10k
37 38
1k
7
FAN8033
Equivalent Circuit (Continued)
Description
Pin No.
Normal
opout
40
Internal circuit
VCC
VCC
50
40
50
Normal
OPIN(+)
OPIN(−)
42
41
VCC
VCC
41
42
5k
Ref
45
VCC
0.1k
45
2k
8
FAN8033
Equivalent Circuit (Continued)
Description
Pin No.
RES50
43
Internal circuit
VCC
50k
43
50k
REG050
46
VCC
2k
41
10k
10k
REG50
47
VCC VCC
53k
47
10k
9
2k
FAN8033
Absolute Maximum Ratings (Ta=25°°C)
Parameter
Symbol
Value
Unit
VCC
18
V
Maximum supply voltage
Power dissipation
3
PD
note
W
Operating temperature
TOPR
−35 ~ +85
°C
Storage temperature
TSTG
−55 ~ +150
°C
Maximum output current
IOMAX
1
A
NOTE:
1. When mounted on 70mm × 70mm × 1.6mm PCB.
2. Power dissipation reduces 16mW / °C for using above Ta=25°C.
3. Do not exceed Pd and SOA.
Power Dissipation Curve
Pd (mW)
3,500
2,500
1,500
0
0
25
50
75
100
125
150
175
Ambient temperature, Ta [°C]
Recommended Operating Conditions (Ta=25°°C)
Parameter
Operating supply voltage
Symbol
Min.
Typ.
Max.
Unit
VCC
4.5
-
16
V
10
FAN8033
Electrical Characteristics
(SVCC=PVCC1=PVCC2=8V, Ta=25°C, unless otherwise specified)
Parameter
Quiescent circuit current
All mute on current
Symbol
ICC
Conditions
under no-load
IMUTE ALL Pin 45=GND
Min.
Typ.
Max.
Units
9
12
16
mA
-
6
10
mA
All mute on voltage
VMON ALL Pin 45=Variation
-
-
0.5
V
All mute off voltage
VMOFF ALL Pin 45=Variation
2
-
-
V
CH mute on voltage
VMON CH
Pin 19, 20, 21, 22=Variation
2
-
-
V
CH mute off voltage
VMOFF CH Pin 19, 20, 21, 22=Variation
-
-
0.5
V
−20
-
+20
mV
Ω)
DRIVER PART (RL=8Ω
-
Input offset voltage
VIO
Output offset voltage
VOO
VIN=2.5V
−50
-
+50
mV
Maximum output voltage 1
VOM1
VCC=8V, RL=8Ω
4.0
5.5
-
V
Maximum output voltage 2
VOM2
VCC=13V, RL=24Ω
7
9
-
V
Closed-loop voltage gain
AVF
VIN=0.1VRMS
9
10.5
12
dB
Ripple rejection ratio
RR
VIN=0.1VRMS, f=120kHz
-
50
-
dB
Slew rate
SR
Square, Vout=2Vp-p, f=120kHz
-
0.8
-
V/µs
VOF1
-
−10
-
+10
mV
IB1
-
-
-
300
nA
NORMAL OPAMP PART
Input offset voltage
Input bias current
High level output voltage
VOH1
RL=50Ω
6
6.8
-
V
Low level output voltage
VOL1
RL=50Ω
-
1.0
1.8
V
Output sink current
ISINK1
VIN=−75dB, f=1kHz
10
40
-
mA
10
40
-
mA
Square, Vout=2Vp-p, f=120kHz
-
75
-
dB
VIN=−20dB, f=1kHz
-
65
-
dB
Output source current
Open loop voltage gain
ISOURCE1 VIN=−20dB, f=120kHz
GVO1
Ripple rejection ratio
RR1
Slew rate
SR1
-
-
1
-
V/µs
CMRR1
-
-
80
-
dB
Common mode rejection ratio
11
FAN8033
Electrical Characteristics (Continued)
(SVCC=PVCC1=PVCC2=8V, Ta=25°C, unless otherwise specified)
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
VOF2
-
−10
-
+10
mV
INPUT OPAMP PART
Input offset voltage
IB2
-
-
-
400
nA
High level output voltage
VOH2
-
7
7.7
-
V
Low level output voltage
VOL2
-
-
0.2
0.5
V
Output sink current
ISINK2
-
500
800
-
µA
-
Input bias current
Output source current
Open loop voltage gain
Slew rate
Common mode rejection ratio
500
800
-
µA
VIN=−75dB, f=1kHz
-
80
-
dB
Square, Vout=2Vp-p, f=120kHz
-
1
-
V/µs
VIN=−20dB, f=1kHz
-
80
-
dB
ISOURCE2
GVO2
SR2
CMRR2
5V REGULATOR PART
Regulator output voltage
Vreg
IL=100mA
4.75
5
5.25
V
Load regulation
∆VR1
IL=0→200mA
−40
0
+10
mV
Line regulation
∆VCC
IL=200mA, VCC=6V→9V
−20
0
+30
mV
Reset on voltage
Reson
-
-
-
0.5
V
Reset off voltage
Resoff
-
2
-
-
V
TRAY, CHANGER DRIVER PART (RL=45Ω
Ω)
Input high level voltage
VIH
-
2
-
-
V
Input low level voltage
VIH
-
-
-
0.5
V
Output voltage 1
VO1
VCC=8V, VCTL=3.5V
5.2
6.0
6.8
V
Output voltage 2
VO2
VCC=13V, VCTL=4.5V
7.5
8.5
9.5
V
Output load regulation
∆VR1
-
300
700
mV
Output offset voltage 1
VOO1
VIN=5V, 5V
−10
-
+10
mV
Output offset voltage 2
VOO2
VIN=0V, 0V
−10
-
+10
mV
-
12
FAN8033
Application Information
1. REFERENCE INPUT
Pin 45 (REF) can use the reference Input pin .
• Reference input
In the case of the reference input pin, you must keep the applied voltage range between 2[V] and 6.5[V] at VCC = 8[V].
2. SEPARATED CHANNEL MUTE FUNCTION
These pins are used for individual channel mute operation.
• When the mute pins (pin19, 20, 21 and 22) are high level, the mute circuits are activated so that the output circuit is muted.
• When the voltage of the mute pins (pin19, 20, 21 and 22) are low level, the mute circuit is stopped and output circuits
operate normally.
• If the chip temperature rises above 175°C, then the thermal shutdown (TSD) circuit is activated and the output circuits are
muted.
- Mute 1 (pin 19)-CH1 mute control input pin.
- Mute 2 (pin 20)-CH2 mute control input pin.
- Mute 3 (pin 21)-CH3 mute control input pin.
- Mute 4 (pin 22)-CH4 mute control input pin.
3. PROTECTION FUNCTION
• Thermal shutdown (TSD)
If the chip temperature rises above 175°C, then the thermal shutdown (TSD) circuit is activated and the output circuit is will
be mute. The TSD circuit is temperature hysteresis 25°C.
• Under voltage lockout (UVLO) and over voltage protection (OVP)
It is designed to mute-operate the internal bias by the function of UVLO and OVP, when the power supply voltage falls
below 3.5[V] or above 20[V].
13
FAN8033
4. REGULATOR & RESET FUNCTION
The regulator and reset circuits are as illustrated in Figure 1.
where R1=R2.
• The external circuit is composed of the transistor, KSB772 and a capacitor, about 33[µF]. The capacitor is used as a ripple
eliminator and should have good temperature characteristics.
• The regulator output voltage (pin 46) is decided as follows.
Vout = 2 × 2.5 = 5[V] (where R1 = R2)
• When the voltage of pin 43 (Vreset) is at 5[V], the regulator output voltage (pin 46) because 5[V]. If the voltage
of pin 43 is 0[V], the output voltage of pin 46 because 0[V].
VCC
KSB772
REG OUT
+
Vreset
33µF
47
2.5V
+
−
46
44
43
39
R1
R2
FAN8033
Figure 1. Regulator circuit
14
FAN8033
5. FOCUS, TRACKING ACTUATOR, SPINDLE, SLED MOTOR DRIVE PART
M
AP2
-
Rfeed2
AP3
+
+
−
Rfeed2
Vr
IC
Rref2
Rref2
−
LEVEL
+
SHIFT
Rfeed1
AP1
+
−
+
45
−
Rref1
Vref
2
5
8 11
1
4
7 10
−
+
BF
Vin
3
6
9 48
• The voltage, Vref is the reference voltage given by the external bias voltage of the pin 45.
• The input signal (Vin) through pins 3, 6, 9 and 48 is amplified one times (Rref1 = Rfeed1) by the AP1 and then fed to the
level shift.
• The level shift produces the current due to the difference between the input signal and the arbitrary reference signal. The
current produced as +∆I and −∆I are fed into the output amplifier, where output amplifier (AP2, 3) gain is two times (all
Rref2 = Rfeed2).
• If you desire to change the gain, the input buffer amplifier (BF) can be used.
• The output stage is the balanced transformerless (BTL) driver.
• The bias voltage Vr is expressed as below;
V CC – V BE
Vr = ---------------------------- [ V ]
2
15
FAN8033
6. TRAY, CHANGE MOTOR DRIVE PART
24
out 1
26
out 2
25
27
M
D
D
LEVEL SHIFT
M.S.C
CTL1, 2
12
15
S.W
IN
IN
FWD
13
REV
16
14
17
• Rotational direction control
The forward and reverse rotational direction is controlled by FWD (pin 13, 16) and REV (pin 14, 17) input conditions are as
follows.
INPUT
OUTPUT
FWD
REV
OUT 1
OUT 2
State
H
H
Vr
Vr
Brake
H
L
H
L
Forward
L
H
L
H
Reverse
L
L
Vr
Vr
Brake
• where Vr is (Vcc - Vbe) / 2 = 3.65V (at Vcc=8V)
• where Out1 pins are pins 24 and 26, and out2 pins aer pins 25 and 27
• Motor speed control
- The almost maximum torque is obtained when it is used with the pins 12 and 15 (CTL1, 2) open.
- If the torque of the motor is too low, then the applied voltage at pins 12 and 15 (CTL1, 2) are 0[V].
- When motor speed controlled, the applied voltage of the pins 12 and 15 (CTL1, 2) is between 0 and 4V.
Also, if the speed control is constant, the applied voltage of the pins 12 and 15 (CTL1, 2) is between 4 and 5V.
- This IC's applied maximum voltage is 6V when VCC is 8V.
- You must not use the applied CTL1, 2 voltage above 5.8V when VCC is 8V, and 3V when VCC is 5V.
16
FAN8033
Typical Perfomance Characteristics
Total circuit
Icc(mA)
Icc(mA)
<Vcc vs Icc>
14.0
<Temp vs Icc>
13.4
13.2
13.5
13.0
12.8
13.0
12.6
12.5
12.4
12.2
12.0
12.0
11.8
Vcc=Var.
Temp=25°C
11.5
Vcc=8V
Temp=25°C
11.6
11.4
11.0
5
6
7
8
9
10
11
12
13
14
-30
-10
0
10
30
40
50
60
70
80
Temp(°C)
Vcc(V)
Focus, Tracking, Spindle, Sled drive part
Vom(V)
Avf(dB)
<Vcc vs Vom>
10.0
<Vcc vs Avf>
12.0
9.0
10.0
8.0
7.0
8.0
6.0
5.0
6.0
4.0
Vcc=Vari.
Temp=25°C
RL=8Ω
Vin=0.1Vrms
f=1KHz
4.0
3.0
Vcc=Vari.
Temp=25°C
RL=8Ω
2.0
1.0
2.0
0.0
0.0
4
5
6
7
8
9
10
11
12
13
4
5
6
7
8
9
10
11
12
Vcc(V)
Vcc(V)
out(V)
13
Avf(dB)
<Vin vs Vout>
5.0
<Temp vs Avf>
10.9
4.5
10.8
4.0
3.5
10.7
3.0
10.6
2.5
2.0
1.5
1.0
0.5
Vcc=8V
Temp=Var.
RL=8Ω
Vin=0.1Vrms
f=1KHz
10.5
Vcc=8V
Temp=25°C
RL=8Ω
Vin=Var.
10.4
10.3
0.0
0.2
0.4
0.6
0.8
1
12
14
-30
-10
0
10
30
40
50
60
70
80
Temp (°C)
Vin(V)
17
FAN8033
Typical Perfomance Characteristics (Continued)
Vom (V)
<Tem p vs Vom>
5.52
5.50
5.48
5.46
5.44
5.42
5.40
5.38
vcc=8V
temp= Var.
RL=8Ω
5.36
5.34
5.32
-30
-10
0
10
30
40
50
60
70
80
Temp (°C)
Tray, Change drive part
Vo (V)
Vo (V)
<Vcc vs Vo>
9.0
<Temp vs Vo>
6.1
8.0
6.0
7.0
5.9
6.0
5.8
5.0
4.0
5.7
Vcc=Var.
Temp=25 °C
RL=45Ω
Vin=5V/0V
Vctl=3.5V
3.0
2.0
1.0
5.6
5.5
0.0
4
5
6
7
8
9
10
11
12
vcc=8V
temp= Var.
RL=45Ω
Vin=5V/0V
Vctl=3.5V
5.4
-30
13
-10
0
10
30
40
50
60
Vcc(V)
70
80
Temp (°C)
Vo (V)
Vo (V)
<Vctl vs Vo>
7.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
Vcc=8V
Temp=25 °C
RL=4Ω
Vin= 5V/0V
Vctl= Var.
2.0
1.0
<Vctl vs Vo>
7.0
Vcc=8V
Temp=25 °C
RL=8Ω
Vin= 5V/0V
Vctl= Var.
2.0
1.0
0.0
0.0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
Vctl(V)
Vctl(V)
18
FAN8033
Typical Perfomance Characteristics (Continued)
Regulator part
Vreg (V)
Vreg (V)
<Vcc vs Vreg>
6.0
<Temp vs Vreg>
5.08
5.06
5.0
5.04
4.0
5.02
3.0
5.00
Vcc=Var.
Temp=25 °C
IL=100mA
2.0
1.0
vcc=8V
temp= Var.
IL=100mA
4.98
4.96
4.94
0.0
4
5
6
7
8
9
10
11
12
-30
13
-10
0
10
30
40
50
60
Vcc (V)
70
80
Temp (°C)
Normal op amp part
Isou1(mA)
Isink1(mA)
<Vcc vs Isource>
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
Vcc=Var.
Temp=25°C
RL=50Ω
20.0
10.0
<Vcc vs Isink>
70.0
Vcc=Var.
Temp=25°C
RL=50Ω
20.0
10.0
0.0
0.0
4
5
6
7
8
9
10
11
12
13
4
Vcc (V)
GVo1(dB)
6
7
8
9
10
11
13
<Temp vs Isource >
59.0
84.0
12
Vcc (V)
Isou1(mA)
<Vcc vs Open loop voltage gain>
86.0
5
58.0
82.0
57.0
80.0
56.0
78.0
55.0
Vcc=Var.
Temp=25 °C
RL=1KΩ
Vin=100uVp_p
f=1KHz
76.0
74.0
72.0
70.0
54.0
52.0
51.0
-30
68.0
4
5
6
7
8
9
10
11
vcc=8V
temp= Var.
RL=50Ω
53.0
12
13
Vcc (V)
-10
0
10
30
40
50
60
70
80
Temp (°C)
19
FAN8033
Typical Perfomance Characteristics (Continued)
Isink1(mA)
<Temp vs Isink>
60.0
50.0
40.0
30.0
20.0
vcc=8V
temp= Var.
RL=50Ω
10.0
0.0
-30
-10
0
10
30
40
50
60
70
80
Temp (°C)
Input op amp part
Isou2(uA)
Isink2(uA)
<Vcc vs Isource>
2500
<Vcc vs Isink>
1600
1400
2000
1200
1000
1500
800
1000
600
Vcc=Var.
Temp=25 °C
RL=1 kΩ
500
200
0
0
4
5
6
7
8
9
10
11
12
13
4
Vcc(V)
GVo2(uA)
<Vcc vs Open loop voltage gain>
83
82
81
80
79
78
77
Vcc=Var.
Temp=25 C
RL=1k Ω
76
75
74
73
4
Vcc=Var.
Temp=25 °C
RL=1 kΩ
400
5
6
7
8
9
10
11
12
13
Vcc(V)
20
5
6
7
8
9
10
11
12
13
Vcc(V)
FAN8033
Test Circuits
VCC
Vref
2.5V
KSB772
+
~
Ripple
REG OUT
100µF
1
2
20
33µF
IL
O
P
I
N
OO
P P
I O
NU
T
(−
−)
(+)
1000µF
+
+
RL
48
47
46
45
44
43
42
41
40
39
38
37
REG050
REF
SVCC
RES50
OPIN(+)
OPIN(−)
OPOUT
PVCC2
DO1.1
DO1.2
IN1.2
REG50
OPIN (+)
OPIN (−)
OPOUT
IN1.1
Vreset
1
2 OUT1
OPIN (+)
OPIN (−)
OPOUT
36
DO2.1
RL
DO2.2 35
3 IN2.1
PGND3 34
4 IN2.2
DO3.1 33
5 OUT2
DO3.2 32
6 IN3.1
PGND2 31
RL
FAN8033
OPIN (+)
OPIN (−)
OPOUT
7 IN3.2
PGND1 30
8 OUT3
DO4.1 29
9 IN4.1
DO4.2 28
10 IN4.2
DO5.1 27
11 OUT4
DO5.2
FWD2
REV2
SGND
MUTE1
MUTE2
MUTE3
MTUE4
PVCC1
13
14
15
16
17
18
19
20
21
22
23
12
DO6.2
CTL
CTL1
REV1
OPIN (+)
OPIN (−)
OPOUT
FWD1
RL
RL
26
DO6.1
IL
25
24
RL
CTL1
IL
IN1A
IL
IN1B CTL2 IN2A IN2B
opamp part
OPIN(+)
1
SW3
2
OPOUT
OPIN(−)
1
2
3
4
1M
D
1k
SW7
A ~
1M
B
1
10µF
21
50
SW5
1
2
VCC
SW6
1
2
VCC
IL
FAN8033
Application Circuits 1
Voltage Mode Control
VCC
KSB772
REG OUT
+
Vreset
33µF
48
47
46
45
44
43
42
41
40
39
38
37
REG050
REF
SVCC
RES50
OPIN(+)
OPIN(−)
OPOUT
PVCC2
DO1.1
DO1.2
1
REG50
IN1.2
IN1.1
FOCUS
2 OUT1
36
DO2.1
TRACKING
DO2.2 35
3 IN2.1
PGND3 34
4 IN2.2
DO3.1 33
5 OUT2
DO3.2 32
6 IN3.1
PGND2 31
M SPINDLE
FAN8033
7 IN3.2
PGND1 30
8 OUT3
DO4.1 29
9 IN4.1
DO4.2 28
10 IN4.2
DO5.1 27
11 OUT4
DO5.2 26
SGND
MUTE1
MUTE2
MUTE3
15
16
17
18
19
20
21
22
DO6.2
REV2
14
PVCC1
FWD2
13
MTUE4
CTL
12
REV1
CTL1
FWD1
M SLED
23
24
25
M TRAY
DO6.1
M CHANGE
SLED
SPINDLE
TRACKING
FOCUS
REF &
ALL
MUTE
FOCUS TRACKING SPINDLE SLED
INPUT
INPUT
INPUT INPUT
[SERVO PRE AMP]
TRAT CONTROL CHANGE
INPUT
TY CG
INPUT
[CONTROLLER]
Notes:
Radiation pin is connected to the internal GND of the package.
Connect the pin to the external GND.
22
Where TY is tray motor.
CG is change motor
MUTE
MUTE
MUTE
MUTE
FAN8033
Application Circuits 2 (Continued)
Differential Mode Control
VCC
KSB772
REF &
ALL
MUTE
REG OUT
+
Vreset
33µF
48
47
46
45
44
43
42
41
40
39
38
37
REG050
REF
SVCC
RES50
OPIN(+)
OPIN(−)
OPOUT
PVCC2
DO1.1
DO1.2
1
REG50
IN1.2
IN1.1
FOCUS
2 OUT1
36
DO2.1
TRACKING
DO2.2 35
3 IN2.1
PGND3 34
4 IN2.2
DO3.1 33
5 OUT2
DO3.2 32
6 IN3.1
PGND2 31
M SPINDLE
FAN8033
7 IN3.2
PGND1 30
8 OUT3
DO4.1 29
9 IN4.1
DO4.2 28
10 IN4.2
DO5.1 27
11 OUT4
DO5.2
CTL
FWD2
REV2
SGND
MUTE1
MUTE2
MUTE3
MTUE4
PVCC1
DO6.2
12
REV1
CTL1
FWD1
M SLED
13
14
15
16
17
18
19
20
21
22
23
24
M TRAY
26
DO6.1
25
M CHANGE
SLED
SPINDLE
TRACKING
FOCUS
PWM1 PWM2
FOCUS
PWM3 PWM4
TRACKING
PWM5 PWM6
SPINDLE
[SERVO PRE AMP]
PWM7 PWM8
SLED
TRAT CONTROL CHANGE
INPUT
TY CG
INPUT
[CONTROLLER]
23
Where TY is tray motor.
CG is change motor
MUTE
MUTE
MUTE
MUTE
FAN8033
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
INTERNATIONAL. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
12/1/00 0.0m 001
Stock#DSxxxxxxxx
 2000 Fairchild Semiconductor International