Previous Datasheet Index Next Data Sheet Bulletin I27402 IRKD600.. SERIES SUPER MAGN-A-PAK TM Power Modules STANDARD DIODES Features 600 A High current capability 3000 VRMS isolating voltage with non-toxic substrate High surge capability High voltage ratings up to 2000V Industrial standard package UL recognition pending Typical Applications Rectifying bridge for large motor drives Rectifying bridge for large UPS Major Ratings and Characteristics Parameters IRKD600.. Units 600 A 82 °C 1120 A 82 °C @ 50Hz 19.0 KA @ 60Hz 20.1 KA @ 50Hz 1805 KA2s @ 60Hz 1683 KA2s 18050 KA2 √s I F(AV) @ TC IF(RMS) @ TC IFSM I2t I2 √t V RRM range 800 to 2000 V T STG range - 40 to 150 °C TJ range - 40 to 150 °C To Order 1 Previous Datasheet Index Next Data Sheet IRKD600.. Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code IRKD600.. VRRM , maximum repetitive peak reverse voltage V VRSM , maximum nonrepetitive peak rev. voltage V 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 IRRM max. @ TJ max. mA 50 Forward Conduction Parameter IF(AV) IRKD600.. Units Conditions Maximum average forward current 600 A @ Case temperature 82 °C IF(RMS) Maximum RMS forward current 1120 A IFSM Maximum peak, one-cycle forward, 19.0 KA non-repetitive surge current I2 t Maximum I2t for fusing I √t Maximum I √t for fusing 2 180° conduction, half sine wave @ T C = 82°C t = 10ms No voltage 20.1 t = 8.3ms reapplied 16.2 t = 10ms 100% VRRM 17.2 t = 8.3ms reapplied Sinusoidal half wave, t = 10ms No voltage Initial TJ = TJ max. 1683 t = 8.3ms reapplied 1319 t = 10ms 100% VRRM t = 8.3ms reapplied 1805 KA2s 1230 2 180° conduction, half sine wave 18050 VF(TO)1 Low level value of threshold voltage 0.70 VF(TO)2 High level value of threshold voltage 0.77 rf1 Low level value of forward slope resistance 0.28 rf2 High level value of forward slope resistance 0.25 VFM Maximum forward voltage drop 1.24 KA √s t = 0.1 to 10ms, no voltage reapplied 2 V (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = T J max. (I > π x IF(AV)), TJ = T J max. mΩ (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = T J max. (I > π x IF(AV)), TJ = T J max. V Ipk = 1800A, TJ = 25°C, tp = 10ms sine pulse Blocking Parameter VINS RMS isolation voltage IRRM Maximum peak reverse and off-state IRKD600.. Units Conditions 3000 V 50 mA leakage current To Order 2 t=1s TJ = TJ max., rated VRRM applied Previous Datasheet Index Next Data Sheet IRKD600.. Series Thermal and Mechanical Specifications Parameter IRKD600.. TJ Max. junction operating temperature range - 40 to 150 Tstg Max. storage temperature range - 40 to 150 R thJC Max. thermal resistance, junction to Units Conditions °C 0.065 K/W 0.02 K/W 6-8 Nm Per junction, DC operation case R thC-hs Max. thermal resistance, case to heatsink T Mounting torque ± 10%SMAP to heatsink busbar to SMAP wt 12 - 15 Approximate weight 1500 Case style A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound g Super Magn-a-Pak See outline table ∆RthJC Conduction (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction 180° 0.009 0.006 120° 0.011 0.011 90° 0.014 0.015 60° 0.021 0.022 30° 0.037 0.038 Units Conditions K/W TJ = TJ max. Ordering Information Table 1 Device Code 1 - IRK D 600 1 2 3 - ~ 20 4 Module type + 2 2 - Circuit configuration D = 2 diodes in series 3 - Current rating 4 - Voltage code: Code x 100 = VRRM (See Voltage Ratings Table) 3 To Order 3 Previous Datasheet Index IRKD600.. Series Outline Table All dimensions in millimeters (inches) To Order 4 Next Data Sheet