19-2401; Rev 3; 3/97 Ultra-Fast ECL-Output Comparator The MAX9690 is an ultra-fast ECL comparator manufactured with a high-frequency bipolar process (fT = 6GHz) capable of very short propagation delays. This design maintains the excellent DC matching characteristics normally found only in slower comparators. The MAX9690 is similar in function to the MAX9685, except the latchenable input is eliminated. The MAX9690 is pin-compatible with the CMP-08 but exceeds the AC characteristics of that device. ____________________________Features ♦ 1.3ns Propagation Delay ♦ +5V, -5.2V Power Supplies ♦ Pin-Compatible with CMP-08 ♦ Available in Commercial, Extended-Industrial, and Military Temperature Ranges ♦ Available in Small-Outline Package The MAX9690 has differential inputs and complementary outputs that are fully compatible with ECL-logic levels. Output current levels are capable of driving 50Ω terminated transmission lines. The ultra-fast operation makes signal processing possible at frequencies in excess of 600MHz. ______________Ordering Information ________________________Applications PART TEMP. RANGE MAX9690CPA-4 0°C to +70°C 8 Plastic DIP MAX9690CSA MAX9690CJA MAX9690EPA MAX9690ESA MAX9690MJA-4 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -55°C to +125°C 8 SO 8 CERDIP 8 Plastic DIP 8 SO 8 CERDIP High-Speed A/D Converters High-Speed Line Receivers Peak Detectors Threshold Detectors ________________Functional Diagram PIN-PACKAGE __________________Pin Configuration TOP VIEW IN+ Q OUT IN- Q OUT RL RL VT V+ 1 8 GND1 IN+ 2 7 GND2 IN- 3 6 Q OUT V- 4 5 Q OUT MAX9690 DIP/SO THE OUTPUTS ARE OPEN EMITTERS, REQUIRING EXTERNAL PULL-DOWN RESISTORS. THESE RESISTORS MAY BE WITHIN 50Ω–200Ω CONNECTED TO -2.0V, OR 240Ω–2kΩ CONNECTED TO -5.2V. ________________________________________________________________ Maxim Integrated Products 1 For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 408-737-7600 ext. 3468. MAX9690 _______________General Description MAX9690 Ultra-Fast ECL-Output Comparator ABSOLUTE MAXIMUM RATINGS Supply Voltages.....................................................................±6V Input Voltages........................................................................±5V Differential Input Voltages...................................................±3.5V Output Current ....................................................................30mA Continuous Power Dissipation (TA = +70°C) Plastic DIP (derate 9.09mW/°C above +70°C)...........727mW SO (derate 5.88mW/°C above +70°C) .......................471mW CERDIP (derate 8.00mW/°C above +70°C) ...............640mW Operating Temperature Ranges MAX9690C_ A ...................................................0°C to +70°C MAX9690E_ A ................................................-40°C to +85°C MAX9690MJA ..............................................-55°C to +125°C Storage Temperature Range .............................-55°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = +5V, V- = -5.2V, RL = 50Ω, VT = -2V, TA = +25°C, unless otherwise noted.) PARAMETER Input Offset Voltage Temperature Coefficient Input Offset Current Input Bias Current Input Voltage Range Common-Mode Rejection Ratio Power-Supply Rejection Ratio Input Resistance Input Capacitance SYMBOL VOS ∆VOS/∆T IOS IB VCM CMRR CONDITIONS TA = +25°C TA = TMIN to TMAX (Note 1) TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX (Note 1) (Note 1) RIN CIN (Note 1) 80 60 VOH VOL MAX9690E Positive Supply Current TA = +25°C Negative Supply Current TA = +25°C -0.87 -1.16 -0.89 -0.70 -0.88 -0.69 TA = +25°C -0.96 -0.81 -0.96 -0.81 TA = TMIN -1.14 -0.88 TA = TMAX -0.88 -0.70 TA = +25°C -0.96 -0.81 TA = TMIN -1.83 -1.57 -1.82 -1.55 TA = TMAX -1.89 -1.65 -1.90 -1.65 TA = +25°C -1.85 -1.65 -1.85 -1.65 TA = TMIN -1.90 -1.65 TA = TMAX -1.83 -1.57 TA = +25°C -1.85 -1.65 16 24 20 32 V kΩ pF -0.89 TA = TMIN to TMAX µA 3 -1.05 22 µA dB TA = TMAX 16 mV µV/°C 60 TA = TMIN TA = TMIN to TMAX UNITS dB 60 3 MAX9690C, MAX9690M 2 MAX9690M MIN TYP MAX -5 5 -8 8 15 5 12 10 20 40 -2.5 +2.5 60 MAX9690E Logic Output Low Voltage 80 PSRR MAX9690C, MAX9690M Logic Output High Voltage MAX9690C/E MIN TYP MAX -5 5 -7 7 10 5 8 10 20 30 -2.5 +2.5 22 25 20 36 _______________________________________________________________________________________ 32 37 V V mA mA Ultra-Fast ECL-Output Comparator (V+ = +5V, V- = -5.2V, RL = 50Ω, VT = -2V, TA = +25°C, unless otherwise noted.) SYMBOL PARAMETER Input to Output High (Notes 1, 2) tpd+ MAX9690C/E MIN TYP MAX CONDITIONS TA = +25°C 1.3 1.8 TA = 0°C to +70°C 1.5 2.0 TA = +25°C 1.3 1.8 TA = 0°C to +70°C 1.5 2.0 MIN 1.3 tpd- UNITS 1.8 ns TA = -55°C to +125°C Input to Output Low (Notes 1, 2) MAX9690M TYP MAX 1.7 2.4 1.3 1.8 1.7 2.4 ns TA = -55°C to +125°C Note 1: Not tested, guaranteed by design. Note 2: VIN = 100mV, VOD = 10mV. __________Applications Information ____________________Timing Diagram Layout The timing diagram illustrates the series of events that completes the compare function, under worst-case conditions. The leading edge of the input signal (illustrated as a large-amplitude, small-overdrive pulse) –– switches the comparator. Outputs Q and Q are similar in timing. Because of the MAX9690’s large gain-bandwidth characteristic, special precautions need to be taken if its highspeed capabilities are to be used. A PC board with a ground plane is mandatory. Mount all decoupling capacitors as close to the power-supply pins as possible, and process the ECL outputs in microstrip fashion, consistent with the load termination of 50Ω to 120Ω. For low-impedance applications, microstrip layout at the input may also be helpful. Pay close attention to the bandwidth of the decoupling and terminating components. Chip components can be used to minimize lead inductance. Input Slew-Rate Requirements As with all high-speed comparators, the high gain-bandwidth product of these devices creates oscillation problems when the input traverses through the linear region. For clean switching without oscillation or steps in the output waveform, the input must meet certain minimum slewrate requirements. The tendency of the part to oscillate is a function of the layout and source impedance of the circuit employed. Both poor layout and larger source impedance increase the minimum slew-rate requirement. Definition of Terms VOS VIN VOD Input Offset Voltage—The voltage required between the input terminals to obtain 0V differential at the output. Input Voltage Pulse Amplitude Input Voltage Overdrive tpd+ Input to Output High Delay—The propagation delay measured from the time the input signal crosses the input offset voltage to the 50% point of an output low-to-high transition. tpd- Input to Output Low Delay—The propagation delay measured from the time the input signal crosses the input offset voltage to the 50% point of an output high-to-low transition. _______________________________________________________________________________________ 3 MAX9690 SWITCHING CHARACTERISTICS MAX9690 Ultra-Fast ECL-Output Comparator DIFFERENTIAL INPUT VOLTAGE VIN VOS VOD t pd Q 50% Q 50% Figure 1. Timing Diagram Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 4 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 1997 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.