Series -5GM Dimensions Optical axis 30 26.5 2.5 M5x0.5 7 7 LED LED 45 35 26.5 Optical axis 30 2.5 M5x0.5 ø 6.5 ø 3.5 M8x1 Cable design Plug design M8x1 (-V3) Through beam sensor OBE250-5GM35-SE0 OBE250-5GM35-SE1 OBE250-5GM35-SE2 OBE250-5GM35-SE3 OBE250-5GM45-SE0-V3 OBE250-5GM45-SE1-V3 OBE250-5GM45-SE2-V3 OBE250-5GM45-SE3-V3 250 mm Connectors, mounting accessories etc... see "accessories" section e.g. connectors: V3-GM-5M-PUR (straight) V3-WM-E2-5M-PUR (angled) Electrical connection E0: Features • Very small housing E1: 1 / BN T 3 / BU • Complete device, no amplifier needed L+ 4 / BK 1 / BN T 3 / BU L- L+ 2 / BK L- • High operating range • Voltage range 10 ... 30 V DC, output current 100 mA short circuit protected • Optical parts made of glass, easy cleaning E2: E3: 1 / BN T 3 / BU • Protection degree IP67 L+ 4 / BK L- 1 / BN T L+ 2 / BK 3 / BU L- 1 / BN T 4 / BK Test L- Date of issue 3 / BU L+ 31.7.99 Emitter: 1 Technical data Model number Valid for the whole family General specifications Sensing range Reference target Light type Ambient light limit Ambient conditions Ambient temperature Mechanical specifications Protection degree Material Housing Light exit 0 ... 250 mm Receiver IR-light 880 nm ≤ 10000 Lux sun light ≤ 3000 Lux halogen light EN 60947-5-2 Ue I0 tv 10 ... 30 V DC , residual ripple 20 % UB 15 mA (device) 20 ms Switching state, flushing: pre-fault indication Characteristic curves Characteristic response curve Offset Y [mm] 80 Ie f ton 100 mA , short circuit/overload protected ≤ 250 Hz 3 ms Emitter: 1 test input, not activated: < 4 V, activated: > 8 V or open 0 ... 55 °C (273 ... 328 K) IP67 according to EN 60529 40 -40 -80 50 100 150 200 250 Distance X [mm] Permissible separation (offset) between the optical axis of the emitter and receiver. x y Standard conformity Electrical specifications Rated operational voltage No-load supply current Time delay before availability Indicating/operating means LED yellow Output Rated operational current Switching frequency Switch-on delay Input Input type OBE250-5GM35-SE0 OBE250-5GM35-SE1 OBE250-5GM35-SE2 OBE250-5GM35-SE3 OBE250-5GM45-SE0-V3 OBE250-5GM45-SE1-V3 OBE250-5GM45-SE2-V3 OBE250-5GM45-SE3-V3 V2A Scratch resistant mineral glass plate Version data Model number Output type Connection type Mass Model number Output type Connection type Mass Model number Output type Connection type Mass Model number Output type Connection type OBE250-5GM35-SE1 1 switch output E1, npn NC 2 m cable, 3 x 0,14 mm², PVC 76 g OBE250-5GM35-SE2 1 switch output E2, pnp NO 2 m cable, 3 x 0,14 mm², PVC 76 g OBE250-5GM35-SE3 1 switch output E3, pnp NC 2 m cable, 3 x 0,14 mm², PVC 76 g OBE250-5GM45-SE0-V3 1 switch output E0, npn NO V3 connector (M8 x 1), 3 pin 18 g OBE250-5GM45-SE1-V3 1 switch output E1, npn NC V3 connector (M8 x 1), 3 pin 18 g OBE250-5GM45-SE2-V3 1 switch output E2, pnp NO V3 connector (M8 x 1), 3 pin 18 g OBE250-5GM45-SE3-V3 1 switch output E3, pnp NC V3 connector (M8 x 1), 3 pin 18 g Date of issue 31.7.99 Mass OBE250-5GM35-SE0 1 switch output E0, npn NO 2 m cable, 3 x 0,14 mm², PVC 76 g 2