Series -F40 Dimensions 38 3.2 LED Center of receiver optical axis 18 4 3.5 4 35.1 18 3.2 26 45 Center of emitter optical axis 16 3.5 4 M12x1 Diffuse reflective photoelectric sensor M12x1 optional • M8x1 • Cable Potentiometer OBT400-F40-E4-V1 OBT400-F40-E5-V1 400 mm Connectors, mounting accessories etc... see "accessories" section e.g. connectors: V1-G-2M-PVC (straight) V1-W-2M-PVC (angled) Features • Pre-fault indication • Visible red light Electrical connection E4, N.O. (Light ON): • Protection degree IP67 • Connector M12 x 1 for fast mounting 2 / WH R 1 / BN E5, N.O. (Light ON): L+ L+ 2 / WH R 3 / BU R 1 / BN L- E5, N.C. (Dark ON): LL+ 4 / BK 2 / WH R 1 / BN LL+ 4 / BK L- 3 / BU L- Ausgabedatum 8.5.00 3 / BU 3 / BU L- E4, N.C. (Dark ON): 2 / WH L+ L+ 4 / BK 4 / BK • Light/Dark ON, programmable 1 / BN Subject to reasonable modifications due to technical advances. 1 Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com Technical data Model number Valid for the whole family OBT400-F40-E4-V1 OBT400-F40-E5-V1 General specifications Sensing range Adjustment range Reference target Operating mode Light type Ambient light limit Indicating/operating means LED yellow LED red Potentiometer Electrical specifications Rated operational voltage 5 ... 400 mm 50 ... 400 mm Standard white 100 mm x 100 mm Light/Dark ON, programmable Visible red light 660 nm ≤ 10000 Lux sun light ≤ 7500 Lux halogen light Switching state Pre-fault indication Adjustment of the sensing range Ue I0 ≤ 25 mA Time delay before availability tv 30 ms Ie 200 mA , short circuit/overload protected Voltage drop Switching frequency Switch-on delay Ambient conditions Ambient temperature Storage temperature Mechanical specifications Protection degree Connection type Material Housing Light exit Mass Ud f ton Characteristic response curve Offset Y [mm] 15 10 5 -5 -10 -15 0 200 400 600 800 Distance X [mm] 10 ... 30 V DC , ripple 10 %SS No-load supply current X Permissible distance (offset) between optical axis and object. -Y Y Output Rated operational current Characteristic curves ≤ 2.5 V ≤ 500 Hz 1 ms -25 ... 70 °C (248 ... 343 K) -40 ... 70 °C (233 ... 343 K) IP67 according to EN 60529 V1 connector (M12 x 1), 4 pin ABS Scratch resistant plastic plate 40 g Version data OBT400-F40-E4-V1 1 switch output E4, npn NO/ NC OBT400-F40-E5-V1 1 switch output E5, pnp NO/ NC Ausgabedatum 8.5.00 Model number Output type Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com 2